The best polish for car interior plastic in 2021

Over time, the plastic parts of the interior of any car become covered with various scratches, stains and other defects. Fortunately, it is now very easy to restore an attractive appearance to products. You can polish them yourself. And now we present to you the rating of the best polishes for plastic in the car interior for 2021. In it you will find mainly products from well-known manufacturers in different price categories. Most products are suitable for self-use.

Turtle Wax Fresh Shine

Turtle Wax Fresh Shine is a polish for interior plastics from a famous American brand. The product is very popular in our country, as it shows very high efficiency. It perfectly removes even quite complex scratches, abrasions and other defects. When applied with a dry cloth, it gives the surface a glossy shine. And if you apply the composition with a wet rag, the plastic will be matte. The polish has several fragrance options to choose from that give the surface a pleasant aroma. The smell lingers in the cabin for about a week. The product helps reduce contamination of plastic products. The drug is consumed very economically, so it usually lasts for a long time. And its only disadvantage is the relatively high cost. It costs about 500 rubles per bottle.

Selection rules

Before you go to the store for polish, you need to determine a few points. First of all, the purpose of the event. It is necessary to update the car for purchase or to make the coating shine and protect it from further wear. The choice of polish depends on expectations and the desired end result.

If the car has been in use for no more than three years, you should not choose an abrasive polish. It's better to use a less harsh method. If there are many cracks on the body, it is necessary to protect them with a layer of polish that provides this effect.

It is best to use several types of coatings, but choose only one manufacturer. This will help achieve the desired effect and reduce the likelihood of incompatibility of body care products.

Velvet polish for plastic Lavr

When choosing a chemical that will effectively restore plastic parts of a car’s interior, you can consider Lavr velvet plastic polish. This domestically produced product is chosen by many motorists in the country. It is inexpensive and famous for its high efficiency. The composition is considered professional, but it costs about 250 rubles for a large 310 ml bottle. Smaller packaging costs even less. The polish contains silicone and many modern chemical compounds. This allows it to effectively and permanently fill even serious plastic defects, as well as eliminate minor scratches, cracks and similar damage. The product provides surfaces with reliable protection against fading and burnout. It perfectly repels moisture and gives parts a velvety matte appearance. The polish is easy to apply and retains its properties for a long time. At the same time, no streaks, greasy or sticky traces remain on the surface. In addition to plastic, it can also be used for rubber products.

Operating principle

The polishing layer serves as a protection for the paint surface, helping to minimize the negative impact of the environment on the car. The solution itself penetrates into the composition of the top layer of paint. The film that the polish forms closes micro-holes and pores, which provides higher protection of the surface from water and dirt.

Thanks to the additives contained in the polish, the latter helps improve the properties of the paint. Thanks to it, the texture is evened out and the gloss increases.

Hi-Gear Dashboard Cleaner Professional Line

Hi-Gear Dashboard Cleaner Professional Line is a polish of the famous American brand, widely known in our country. It helps not only polish the plastic, but also clean it of dirt, as well as provide it with reliable protection from dirt and various minor damages. The composition has a foaming structure and is effective. It perfectly eliminates minor surface defects, perfectly removes all types of dirt and protects plastic from sunlight, and also repels dust or dirt. After processing, the parts acquire a renewed look and magnificent shine. The effect lasts quite a long time. The product has a pleasant smell that lingers in the cabin for some time. It is advisable to apply it to small areas, as the product can dry out quickly. It is quite economical. But it's quite expensive. Now the cost of a bottle is about 500 rubles. In addition to plastic, the product can effectively clean and restore vinyl or rubber.

How to use polish

Compliance with basic rules will help increase the efficiency of using car polishes.

The surface to be treated is thoroughly cleaned and then dried. They look carefully to ensure that there are no bitumen deposits or traces of resins.
You should use car polish on a sunny day . You need to work in a well-lit place. But you cannot polish in direct sunlight: the compounds will dry too quickly, leaving stains. The higher the humidity, the easier it is to spread the wax.
When polishing a car body with pastes, the individual elements should be divided into equal parts. The hood and trunk are in half, the roof is in quarters. The paste is applied to the resulting zones in equal volumes. You should not apply thick products in thick layers - it will be difficult to distribute them evenly.
For polishing, use a soft, clean cloth without long lint.

To check the quality of the work, apply a little water to the treated surface. If large drops are formed, it means that the technology has been fully complied with.

Plastic restorer polish Lavr

The Lavr plastic restorer polish will help not only polish, but also restore the plastic in the car interior, eliminating minor damage. The product, developed by domestic chemists, has a unique formula that allows you to mask scratches on plastic panels inside the car for a long time and well. In addition, it provides effective and long-lasting protection against the formation of new defects and reduces the likelihood of contamination. After treatment with this composition, the parts look almost like new. Of course, you shouldn't expect a miracle from him. The drug is not able to remove serious surface imperfections. Not a single modern polish, even the most expensive and professional one, can handle this. But the effectiveness of this composition has been tested by many Russian car owners. At the same time, there were no professional tests, but the visual result is obvious and lasts quite a long time. At the same time, the chemistry is very cheap and economical. It costs about 200 rubles. One bottle is enough for about 10 procedures.

Features of application

During the work, it is important to prevent polish from getting on the windshield, otherwise light will refract at night, which leads to an emergency. The light from oncoming cars will be scattered uncharacteristically, which distorts the overall picture of the road situation.

It is not recommended to use car polish on a leather steering wheel; the gloss may slip, making it uncomfortable for the driver to drive the vehicle.

It is important to consider allergic reactions. If there are any or there is a predisposition, products with fragrances should be avoided.

Real reviews are still an effective tool for selecting polishes; they will help you navigate the price category and create an impression of the expected result.

Plastic restorer DoctorWax

This American manufacturer produces the best polishes and other auto chemicals of excellent quality. One such product is DoctorWax plastic restorer. It copes well with minor scratches and dirt, but does not withstand serious defects. At the same time, the composition provides good protection against premature aging and cracking of the material. It prevents the formation of static electricity and perfectly removes unpleasant odors in the car interior. At the same time, the chemistry itself has practically no noticeable aroma. It may leave a whitish coating on the surface. The product can be used not only for processing plastic, but also car interior parts made of leather, vinyl and rubber. The effect of the treatment is considered to be of medium duration. The drug is quite expensive. It costs approximately 550-600 rubles, depending on the place of purchase. It is used quite economically.

Polish with lubricating effect Grass Dashboard Cleaner

Polish with a lubricating effect Grass Dashboard Cleaner is quite affordable and at the same time has good properties. It allows you to update the surface and give it a neat look. The product prevents the rapid dusting and contamination of interior elements, perfectly repels grease, preventing the appearance of persistent and difficult to remove stains. The drug has a pleasant odor that can persist for some time. Its beneficial effect does not last very long, but it costs only 300 rubles or even a little cheaper. Some car enthusiasts claim that the composition is not able to remove even minor scratches on plastic parts. And to eliminate more serious defects, it is not recommended to use it at all. In addition to plastic, it can also be used to process leather, wood and rubber. The drug can be used as a lubricant for small parts of automobile and other mechanisms. But in this capacity, experts recommend using it only in exceptional cases when specialized tools are temporarily unavailable.

The best products for chrome elements

The best polishes for chrome body parts, their rating as of 2021 , are located in the table.

Rating	Product	Volume	Price	vendor code
1	Doctor Wax DW 8317	300 ml	365 ₽	DW8317
2	SONAX	75 ml	410 ₽	308000
3	ABRO CHROME & METAL	240 ml	475 ₽	CP-880

Doctor Wax DW 8317

Doctor Wax DW 8317 is the best superfine polish for restoring the appearance of chrome plating.

Work order:

This is a paste that is applied directly to the cleaned surface and rubbed thoroughly in a circular motion. In the process, foam rubber, napkins, and brushes are used. After treatment, wipe the chrome with a clean cloth.

Advantages:

removes oxides efficiently;
eliminates rust and plaque;
contains abrasive particles;
the polymer fills microcracks and forms an invisible film;
prevents the spread of corrosion;
After treatment with the paste, chrome has a bright shine that is perfectly preserved.

Flaws:

you need to be careful, as you can damage the chrome layer;
If the paste gets on the varnish, it may darken and scuff marks will appear.

SONAX

SONAX – restoring polish for chrome body parts .

Work order:

The paste is rubbed with force. The cleaned part is polished with a napkin.

Advantages:

has pronounced abrasive properties;
perfectly restores the appearance of unpainted chrome surfaces (aluminum, copper, steel);
removes traces of corrosion and prevents its occurrence;
economical consumption.

Flaws:

high cost with small volume;
cannot be used on paintwork.

ABRO CHROME & METAL

ABRO CHROME & METAL – premium – polishing of chrome car body parts from scratches and rust.

Work order:

The paste is laid out in the thinnest layer and gently rubbed with a napkin over the surface. After 5 minutes, the treatment is carried out with a soft rag.

Advantages:

perfectly cleans oxides and deposits;
eliminates minor scratches and clouding;
provides a mirror shine;
delicate abrasive effect;
forms a protective layer;
designed to work with chrome and metal surfaces (stainless steel, copper, bronze, gold, silver);
Can be used on plastic and fiberglass.

Flaws:

will not correct serious damage.

Polish for plastic car panels Astrohim

Astrohim's plastic car panel polish can be used to polish many interior car parts made of plastic. It does a good job of removing minor damage and signs of aging of the material, visibly renewing it and giving it an excellent appearance. The shine stays on the surface for quite a long time. The drug is able to protect plastic from ultraviolet rays and other negative factors. It removes various contaminants. It is not advisable to use the product to treat the steering wheel, as the surface may become slippery after the procedure. There are several pretty long lasting scents to choose from. The effect of the treatment also lasts for a relatively long time, which was confirmed not only by car enthusiasts, but also by specialists who conducted professional tests. At the same time, the polish is quite economical. It is produced in Russia and costs much less than its foreign counterparts. Now its cost is approximately 150-200 rubles.

Repairing small scratches on car plastic

There is a little trick that will help you repair plastic and remove small scratches. The procedure will require a hair dryer, which can be replaced with a lighter.

Plastic recovery:

The damaged area is gently warmed up.
After a short exposure to hot air, the plastic will begin to melt, this will not be noticeable, but the scratch will smooth out somewhat.
Polishing is carried out only after cooling.
For light or transparent plastic, do not use a lighter, otherwise the material will turn yellow. This method will not allow you to remove large scratches; you will have to use putty.

Runway plastic polish

Runway plastic polish was developed by Russian chemists. It allows you to quickly remove minor scratches on plastic interior elements. The product gives the surface a bright, rich color and the appearance of an almost new part. The drug protects against ultraviolet radiation, prevents fading and cracking of the material in the heat and sun. According to the manufacturer, it does not allow plastic panels to heat up quickly, but this opinion is controversial. In addition to plastic, the composition can also be used for vinyl products. At a cost of about 300 rubles per package, it has a fairly average effect, which does not last long. Sometimes, some time after the procedure, unpleasant and difficult to remove stains and stains may appear on the plastic. Drivers consider the main advantage of the polish to be the large and fairly economical 650 ml packaging. In addition, the effectiveness of the product may depend on the composition of the plastic of the dashboard and other interior elements. On some products it can work quite successfully. Chemicals can be used to polish vinyl surfaces.

Rating of popular polishes for plastic

The most common and logical question that arises among car enthusiasts looking for a polish is what is the best polish for plastic? There is no definite answer to this, since on the Internet you can find many conflicting reviews on the use of even the same products. Another factor is that the market is changing, new, more advanced polishes appear in stores, and old products are discontinued.

The following is a rating of popular plastic polishes. It is not commercial in nature and does not intend to advertise any product. The list is compiled based on tests and reviews from car owners who have used the compounds listed below at different times. We hope the information provided will help you make your choice and buy a plastic polish that meets your expectations.

Fast acting plastic polish Turtle Wax

TURTLE WAX GL DRY TOUCH polish shows the highest efficiency in polishing plastic surfaces in the car interior. After treatment with this product, the plastic receives a rich color, and small scratches become invisible. The polish can also be used on rubber and leather surfaces. The composition dries quickly thanks to the “dry shine” formula. Also, turtle wax plastic polish can be used for external car parts made of this material and rubber seals.

Before use, shake the bottle well and then apply the product to the surface to be treated. Allow the polish to soak in for one to two minutes. Next, use a dry cloth to thoroughly polish the surface. If the plastic is heavily soiled, it must first be cleaned with appropriate compounds. The manufacturer does not recommend using the “turtle” on the steering wheel, since the product creates a slippery layer.

Sold in a 300 ml bottle with a push-button sprayer. Its article number is FG7622. The price as of summer 2018 is about 450 rubles.

Pros:
masks minor scratches;
instant drying;
no greasy shine;
wide range of applications;

Minuses:
relatively high price;
forms a sliding layer;

Effective foam polish for plastic elements HI-GEAR

According to numerous reviews from motorists, polishing the dashboard and other plastic elements of the car interior is very effective. The manufacturer positions it as a “3 in 1” product that provides cleaning, shine and protection of the treated surface. It is a foam polish. Can also be used on rubber and vinyl surfaces. After polishing with a product from Haigir, a dense silicone protective layer is formed on the panel, which prevents possible scratches and protects the dashboard from exposure to ultraviolet radiation. Has a pleasant aroma.

The method of application is very simple. To do this, you need to apply a certain amount of polish to the previously cleaned surface. Wait a few minutes, then use a soft cloth or microfiber cloth to polish the surface until a characteristic shine appears. It is better to treat plastic elements in small areas so that the product does not dry out completely during the process.

Packaged in a 280 ml can. Product code: HG5615. The price of such a bottle for the specified period of time is about 450 rubles.

Pros:
protects against scratches;
protection against sunburn;
nice smell;

Minuses:
No;

Polish for adding deep color to the Runway interior

A good effective polish that leaves behind a deep, rich color. It is worth noting that Runway perfectly masks minor scratches on a damaged surface. It can be used not only for internal, but also external elements of the car body, for example, bumpers, moldings, turn signal glasses, and so on. The polish creates a reliable protective layer that protects the plastic from fading and cracking.

The application method is also different and similar to the previous product. That is, the product needs to be applied to a clean rag, and polished thoroughly using another rag (not fluffy). Please note that polish should not come into contact with skin or eyes.

, so it’s better to work with rubber gloves!

Packaged in 250 ml bottles. Product code: RW2539. The price of such a bottle is 250 rubles.

Pros:
masks scratches well;
makes the colors of the treated surfaces more saturated;
creates a protective layer against scratches and sun rays;

Minuses:
composition aggressive towards human skin;
high consumption;

High-tech polish Nanox

The manufacturer positions Nanox as a miracle development based on “nanotechnology.” However, numerous tests of this polish have shown its mediocrity in performing the tasks assigned to it. That is, the efficiency is average. Nanox polish can also be used on rubber and vinyl surfaces. It has an antistatic effect that lasts quite a long time. It also effectively protects plastic from exposure to ultraviolet radiation.

The application method is similar. Using a hand sprayer, apply the product to the surface to be treated and then immediately polish it. Carry out the procedure until characteristic blackening appears.

Sold in 450 ml packaging with a manual sprayer. Product code - NX8344. It has a fairly high price - up to 600 rubles.

Pros:
antistatic effect;
creates a protective layer from ultraviolet radiation;
the effect of use is quite long-lasting;

Minuses:
not very high effectiveness of the drug;

Mattifying polish with a wide range of fragrances Sonax

A good popular Sonax polish with an apple scent. It not only polishes surfaces well, but also creates a protective layer on them. After treatment, a matte effect remains on the surface. Has antistatic and moisture-repellent properties. The product does not contain silicone. As for effectiveness, the reviews can judge its average degree.

The application method can be any - either using a cloth or directly spraying onto the surface to be treated. After this, using a dry rag or microfiber cloth, the product must be thoroughly rubbed into the part until a matte effect is formed.

Sold in a package with a 500 ml manual sprayer. The product code is 358241. Its price is about 300 rubles.

Pros:
antistatic agents in the composition;
creates a protective moisture-repellent layer;
after use it creates a mattifying effect;

Minuses:
mediocre efficiency;

Polish with an effective protective layer Lavr

Lavr plastic polish is positioned as a professional cleaning product for plastic, rubber and vinyl surfaces, including the dashboard. After application, it creates a good protective layer that prevents the harmful effects of ultraviolet radiation and minor mechanical damage. It has several types of flavors, including lime and cherry. However, many car owners note the average effectiveness of using this product. But there are also videos where resale bloggers use this product in the cars that they themselves sell. Whether this is an advertisement or a truly professional plastic polish, judge for yourself.

The application method is traditional. The main thing is to rub the polish using a clean rag so as not to damage the surface or leave marks on it.

Packaged in 400 ml cans. Its article number is Ln1625. The price of this product is 200 rubles, which is not bad for a fairly large bottle.

Pros:
forms a protective layer against sunlight and minor scratches;
many different flavors;
versatility (suitable for different surfaces);

Minuses:
low polishing efficiency;

Polish with lubricating effect Grass

The full name of the product is Grass Dashboard Cleaner. Positioned as a polish and dashboard cleaner. In addition to plastic, it can also be used with rubber, leather and wood. A distinctive feature of this polish is the fact that it can be used as a lubricant in small moving mechanisms. Eliminates unpleasant odors and fills the interior with its own aroma (there are several varieties). However, despite the high efficiency declared by the manufacturer, many car enthusiasts note that the product does not hide minor scratches well. Therefore, the decision to purchase it lies entirely with you, whether you succumb to the manufacturer’s promises or believe in real tests of using such a polish.

The application method is traditional. However, there is no need to wait time after applying the product to the surface. You can immediately afterwards rub the polish with a clean rag into the surface of the plastic or other part.

Sold in a bottle with a fairly large volume - 750 ml. Its article number is 1201071. The price of such a large package is only 300 rubles.

Pros:
can be used as a lubricant for small parts;
fights foreign odors well, has different aromas;

Minuses:
does not mask scratches well;

DoctorWax restorative polish

A good plastic polish from Dr. Wax, which can also be used on rubber, leather and vinyl surfaces. Well restores the original appearance of plastic and masks scratches. This plastic restorer can be used on exterior car parts such as bumpers and moldings. Also has a cleansing effect. The protective layer created on the plastic prevents it from destruction and cracking due to the fact that the product contains protective vinyl. Removes foreign odors. Has an antistatic effect.

The product has an interesting drawback. After treating the dashboard with DoctorWax, after some time a white coating may appear on the inner surface of the windshield, which is quite difficult to wash off. The method of applying polish is traditional. To do this, the bottle has a small push-button sprayer. Polishing should be done using a clean, lint-free rag or microfiber cloth.

Packaged in 650 ml bottles. Its article number is DW5219. The price of such a package is about 700 rubles.

Pros:
effective protective layer;
cleansing effect;
good camouflage of small scratches;

Minuses:
the appearance of a light coating on the glass from the inside;

Budget polish with Astrohim polymers

A good, and most importantly cheap, plastic polish from Astrochem. It is based on a polymer composition, so it can also be used on rubber, vinyl and leather surfaces. The polymer layer obtained as a result of surface treatment with this product effectively protects the plastic from ultraviolet radiation. However, it is noted that the polish does not have an antistatic effect, so dust continues to settle, and it is visible even better on a polished surface. Zarulem also participated in tests from the magazine as the sample was able to clean the upholstery, and not just plastic decorative elements.

Another feature is that after surface treatment, the resulting polymer layer is very slippery. Therefore, it is not recommended to apply this product to the steering wheel and parking brake lever!

. The manufacturer produces this polish with various flavors.

Packaged in 335 ml cans. Product code: AC23311. The price of one package is 100 rubles.

Pros:
good protective layer after use;
suitable for many surfaces;

Minuses:
sliding surface after use;
dust quickly settles on the areas treated with it, since there is no antistatic agent;

Cleaning polish Plak Mat Atas

Also sometimes you can find its analog Atas Plak Super Mat on sale. Quite popular products due to the good ratio of price and amount of product in the cylinder. However, as numerous tests and reviews from car owners show, Plak polish does not perform its function well. It cleans the surface well, but does not polish very well. It leaves behind a matte background. Using Plak polish it is unlikely that you will be able to hide small scratches on plastic, although the manufacturer emphasizes that this is a matte polish for car plastic and, in theory, should, on the contrary, hide scratches and abrasions well.

Has antistatic and dust-repellent properties. However, it is noted that they quickly disappear, literally in 5...7 days. The manufacturer produces a line of similar polishes with different flavors - orange, cherry, papaya and others. The method of use is traditional. It is necessary to apply the product to the surface, wait a little and polish the treated area.

The volume of the cylinder is 600 ml. Its article number is 5163. The price of such a cylinder is about 300 rubles.

Pros:
the best price/quality combination;
good surface cleaning properties;
antistatic agents in the composition;

Minuses:
poor polishing properties;
does not mask scratches well;
does not last long;

Grass Polyrole Matte

Grass Polyrole Matte polish is good at cleaning and restoring plastic car interior parts and more. It can also process products made of vinyl, wood, rubber and leather, which are found in the interior trim of many cars. Tires and unpainted black plastic bumpers are sometimes treated with the product. Polishing liquid removes dirt and minor scratches and restores color. After polishing, the surface may appear almost new, but the effect does not always last long. This may depend on the material from which the product being processed is made. The composition prevents rapid contamination and dusting of the internal elements of the machine. It gives the surface a matte effect. It has a pleasant aroma that can last no more than one week, and usually much less. After using the product, there are no stains or streaks left. Before using it, it is recommended to thoroughly wash and clean the surface. On some parts, the effect of polish may be almost invisible. This is probably due to the composition of the material. Some experts do not recommend using this product too often. It is sold in economical large-volume containers (0.5 liters) with a spray bottle. Sometimes it can be found in cans. The composition costs from 200 rubles (bottle) to 1700 rubles (canister).

We polish plastic in the salon ourselves

Polishing a car panel is a relatively simple procedure that can be done by the average car owner. It is not at all necessary to take the car to a service center; everything can be done manually. All compositions are applicable to new and used plastic elements, except in cases with serious damage that cannot be repaired. The use of polish is effective for removing deep scratches, thermal and chemical damage.

Polishing a car panel is a relatively simple procedure that can be done by the average car owner.

The standard procedure for performing actions looks approximately the same, but sometimes differs. For detailed information, please refer to the instructions.

Processing stages:

cleaning plastic elements from heavy contamination and foreign accessories (if necessary);
uniform application of the composition to the area;
leave the car polish on for a short time;
Rub the surface until shiny.

During the work, you will need a clean, lint-free rag. Given the pungent and strong odor of some compounds, it is best to leave the windows down or doors open.

To preserve the original appearance of the plastic, it is necessary to prevent ultraviolet exposure (park the car in a covered parking lot, tint the windows with athermal film) and minimize the influence of cigarette smoke.

BBF

BBF polish restores, cleans and polishes plastic surfaces well. Sometimes it can return the product to almost its original appearance, but this is only possible if there is no significant damage. Moreover, the effect of using the composition is almost always noticeable and can last a relatively long time. The drug is sold in a convenient aerosol can, so it is consumed slowly and is very easy to apply. Experts do not recommend using it to treat the steering wheel, as it may then become slippery. The product has a pleasant, unobtrusive aroma that lasts for at least several days after application. It is not capable of imparting a bright and very noticeable shine, but it does an excellent job of restoring materials. It is not advisable to use the drug on surfaces other than plastic, as there may be no effect from such use. It's inexpensive. Now a can can be bought for about 200-300 rubles.

There are also other products for polishing automotive plastic on the Russian market. But they are less popular or effective, or are suitable only for professional use by specialists in car service centers and detailing studios.

Now you have found out which polishes for interior plastics were the best in 2021. How do you care for the plastic parts of your car? Are these remedies familiar to you? And what do you prefer to use? If you have any questions or want to tell us something interesting on the topic, write in the comments.

How to make a cleaner-polish with your own hands

If for some reason you cannot or do not want to buy a plastic cleaner produced in a factory, there are several so-called folk recipes with which you can make a composition at home that is functionally similar to the factory one. Here's one of them. You will need the following components:

Solvent "White Spirit".
Glycerol.
Water.
Rags, microfiber or sponge.
Brush (optional).

The algorithm for using a plastic cleaner at home will be as follows:

Cleaning interior plastic with glycerin

Using a brush, sponge or rag and White Spirit, remove dirt from the surface of plastic products (this solvent is safe for plastic).
While the solvent is evaporating, it is necessary to dilute glycerin with water in equal volume fractions (1:1). About 100 ml of mixture or even less is enough.
Using another rag (not the one used for the solvent), apply a solution of glycerin and water to the surface to be treated. This composition acts as a polish.

There is no need to wipe down the surface afterwards, only possible if there is a clear greasy mark left. Before using White Spirit, it is advisable to test its effect on some inconspicuous area of the part (the main thing is that the plastic is the same). This is done to ensure that the solvent will not be harmful to it, since it is possible to use special plastic in a car.

Conclusion

When choosing a particular polish, you must be guided by considerations of price and quality ratio, as well as the availability of goods in stores. You should not buy very cheap products, but there is no point in overpaying. The products listed above do a decent job of polishing plastic surfaces, as well as protecting them from external factors, and retain their protective properties for a long time. However, it is advisable to use polishes on an ongoing basis. This way you can not only maintain the beautiful appearance of the plastic parts of your car's interior, but also protect them from harmful factors.