Cabin filter Nissan Almera classic: where is it located, replacement

The Nissan Almera Classic, which essentially became a remake of the Renault Samsung SM3 for the Russian market, went on sale back in 2006. A fairly budget price ensured the car’s good popularity, and only a change of platform to the familiar B0 and the opening of production in Tolyatti led to the departure of the “classic Almera”.

Cars under this brand have already expired from the dealer warranty, and the owners perform most simple maintenance operations themselves - for this there is no point in contacting either private services, much less the officials. Replacing the cabin filter on a Nissan Almera Classic is simple enough that anyone can do it.

Where is the filter located?

In the Nissan Almera Classic (2008-2014) model, the designers placed the cabin filter in an easily accessible place - behind the glove compartment.

We are replacing

As we have already said, replacing the cabin filter of a Nissan Almera Classic is a very simple process and will take you a maximum of 10 minutes of time and, of course, there is no need to go to a service station for this, wasting your money and time.

Tools

To replace the cabin air-cleaning element, there is no need for tools, perhaps just a rag to wipe the box and gloves to avoid getting your hands dirty.

Replacement instructions

  1. Before replacing, you must open the glove compartment and remove all the things that are in it.

  • We find special retaining clamps and turn them first towards ourselves, and then lift them up. First on one side.
  • The same one is located on the opposite side.
  • This is the position the latch should be in after turning.
  • You probably already realized that similar actions are performed on both sides. Remove the holder.
  • When we open the glove compartment all the way, we will see this view. This is the block that houses the cabin air cleaner.
  • The latches need to be lifted up. This is not difficult to do; no effort is required. The air barrier should now be visible.
  • Remove the cover and remove the old filter element. Then we install a new one.
  • Please note that the new filter element must be installed with the arrows facing down. There are inscriptions on the body of the purifier that should be clearly visible.
  • Barrier replacement

  • Installing the glove box is done in the reverse order.
  • That's it, job done!

    Now you have seen for yourself that changing the cabin filter element on a Nissan Almera Classic is very simple and does not take much time. And when you turn on the air conditioner, you will immediately feel how fresh the air in the cabin of your car has become.

    Video “Quick replacement of the air cleaning element”

    This video shows how to replace the cabin filter on a Nissan Almera Classic in a matter of minutes.

  • Replacing the air filter in a Nissan Almera Classic car
  • Changing the engine oil in Nissan Almera Classic
  • Replacing the fuel filter on Nissan Almera Classic and N16

Source: https://car-avz.ru/glavnaya/ustanovka/3337-protsess-zameny-salonnogo-filtra-v-nissan-almera-classic-foto-i-video

Fuses and relays Nissan Almera Classic

Cars considered: Nissan Almera Classic (B10) 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

Most power supply circuits for vehicle electrical equipment are protected by fuses. Headlights, electric fan motors, fuel pump and other powerful consumers are connected via a relay.

Fuses and relays are installed in mounting blocks, which are located in the vehicle interior at the end of the instrument panel on the left side (on the left front side of the side panel) and in the engine compartment to the left of the battery.

  • Where is the fuse and relay box located in the passenger compartment?
  • 1. The mounting block is located under the instrument panel, to the left of the steering wheel behind a cover that can be opened by pulling it towards you
  • Fuse location diagram in the Nissan Almera Classic block.
  • Interpretation of fuses in the mounting block
Fuse number (current, A)Fuse colorProtected target
1(15 A)blueHeater motor
2 (15 A)blueHeater motor
3Reserve
4 (10 A)redDirection indicators
5 (10 A)redInstrument cluster and reversing lights
6 (10 A)redAnti-lock brake system
7 (20 A)yellowWindscreen wipers
8 (10 A)redHeated front seats
9 (15 A)blueFuel pump
10 (10 A)redAdditional consumers
11 (20 A)yellowHeated rear window
12Reserve
13 (10 A)redHeadlights
14 (10 A)redFuel injection nozzles
15 (10 A)redInstrument cluster, clock
16 (15 A)blueCigarette lighter
17 (10 A)redExterior mirrors
18 (10 A)redInterior lighting
19 (15 A)blueDoor locks
20 (10 A)redBrake lights
21 (10 A)redCar radio
22 (10 A)redEngine management system
23 (10 A)redAirbags
24 (10 A)redAir conditioner
25 (10 A)redAutomatic transmission control system
26 (10 A)redIgnition system
  1. Location of the relay in the mounting block in the cabin.
  2. 1 — power window relay;
  3. 2 — rear fog lamp relay;
  4. 3 - central locking relay
  5. There are additional relays on the reverse side of the interior mounting block
  6. 1 - air conditioning system relay;
  7. 2 - 1st ignition relay;
  8. 3 - 2nd ignition relay:
  9. 4 - additional equipment relay
  10. Relay and fuse box under the hood
  11. Engine compartment of the car (top view): 1, 16, 26 - relay and fuse blocks; 2 — reservoir of the power steering system; 3 — upper supports of the front suspension struts; 4 — oil filler plug, 5 — ABS block; 6 — inlet pipe; 7 — ignition coils; 8-fuel rail; 9 — throttle assembly; 10 - resonance chamber of the air supply sleeve; 11 — vacuum booster of the brake system; 12 — reservoir of the main brake cylinder; 13 — clutch master cylinder reservoir; 14 — air filter housing, 15 — battery; 17 — gearbox; 18 — thermostat housing; 19 — radiator of the engine cooling system; 20 — heat-insulating casing of the exhaust manifold; 21 — oil level indicator in the engine crankcase (oil dipstick); 22 - generator; 23 — cylinder head cover; 24 — expansion tank of the engine cooling system; 25 — filler plug of the windshield washer reservoir
  12. Fuse box in the engine compartment
  13. Deciphering the fuses under the hood
Fuse numberProtected circuitRated current, A
1Reserve
2Reserve
3Reserve
4Sound signal15
5Throttle valve15
6parking lights10
7Engine management system10
8Reserve
9Ignition coils15
10Ignition switch circuit30
11Anti-lock braking system20
12Anti-lock braking system20
13Anti-lock braking system20
141st main fuse65
15Reserve
16Reserve
17Heated windshield15
18Anti-lock braking system5
19Rear fog light10
20Instrument cluster20
21Fog lights15
22High beam headlights15
23dipped headlights15
24Generator100
251st radiator fan motor30
262nd radiator fan motor30
27Window lifters30
28Reserve
292nd main fuse65
  • Relay location in the block under the hood
  • 1 - low beam headlight relay; 2 — anti-theft alarm relay; 3 — relay for high beam headlights; 4-2nd radiator fan relay; 5 — ABS diagnostic connector; 6-1st radiator fan relay; 7 — sound signal relay; 8 — air conditioner relay; 9 - automatic transmission relay: 10 - 3rd radiator fan relay

Where is the cabin filter of the Nissan Almera classic: we outline it in detail

The Nissan Almera Classic brand is very popular among Russians, primarily due to its efficiency. At the same time, the car is comfortable and easy to drive. However, like any other car, Nissan requires proper and timely maintenance. In the article below we will look at the procedure for replacing the cabin filter.

Video of replacing cabin filter Nissan Almera

The main reason for the need to regularly change cabin filters is the immutable fact that over time, pathogenic microorganisms and bacteria begin to rapidly develop on its contaminated surface. The dirty surface of an old filter is an ideal place for mold and mildew to grow. The cabin air filter is located in a warm place with high humidity. The evaporator of the air conditioning system is located in the immediate vicinity of it; the air filter is not exposed to sunlight, which destroys harmful substances. The largest increase in the harmful environment is recorded on the surface of cheap synthetic filters. The best manufacturers use special materials for the manufacture of cabin air filters, treated with aseptic, antibacterial impregnation. But even such technologies do not guarantee complete inhibition of microflora growth. Over time, the antibacterial properties are simply exhausted. As a result, harmful bacteria and spores enter the body of the driver and passengers through the air ducts. Such substances have a particularly unfavorable effect on the elderly, children and people with reduced immunity.

  • Replacing the cabin filter is a mandatory routine task, but in conditions of intensive use in the city, it is necessary to change it not after certain kilometers, but as it actually gets dirty.
  • To replace the cabin filter in a Nissan Almera Classic car, you do not need any specialized equipment or tools.
  • To replace the filter, open the glove compartment of your car and clean it.

There are locking latches on the sides of the glove compartment. They must first be turned towards themselves, and then lifted up.

A similar operation must be carried out with the latch located on the opposite side of the glove compartment.

Having opened the glove compartment all the way, we remove it from its seat and the cabin filter cover opens in front of us.

The filter covers are secured with latches. We open them upwards and gain access to the cabin air filter.

After removing the cover, remove the old cabin filter. We wipe the seat and insert a fresh, clean filter.

When placing a new filter, make sure it is positioned correctly. The arrows will help us with this. If placed correctly, you will be able to read the labels on the filter.

So, you yourself replaced the cabin filter on your Nissan Almera Classic. This operation should not raise any special questions for you. Don't forget to regularly check the condition of the cabin filter and change it if necessary.

Air purifier

The cabin filter is an element that has certain fibers impregnated with a substance against unwanted bacteria. It is designed to protect the air inside the car from the air from the outside. Helps reduce the concentration of hazardous substances. These are compounds such as nitric oxide, aromatic hydrocarbons, carbon monoxide and other harmful substances. This helps maintain the health of car passengers and improves travel comfort.

The cabin filter protects the interior of the car and the passengers in it from various toxic substances that exist in the environment around us.

The filter protects against such phenomena as:

Traffic fumes. Fungi. Insects. Gases from enterprise pipes. Dangerous bacteria. Various allergens.

This device needs to be checked from time to time. Replacing the cabin filter must be carried out systematically, especially in our environment, which is not particularly environmentally friendly. Over time, the device may become clogged, and with us this will definitely happen. You can determine whether your filter is clogged or not by following some signs:

The stove's performance has become worse. Unpleasant “odors” appeared in the cabin. The flow of air from the air conditioner has become much weaker.

If there is at least one of the indicated signs, then check the Nissan cabin filter as soon as possible and, if necessary, be sure to replace it.

Such a filter device is inexpensive, and it is very easy to change it: any beginner in mechanical engineering can do it. Even someone who doesn’t understand anything about cars can handle this.

Replacing the cabin filter Nissan Almera Classic

The Nissan Almera Classic is nothing more than an upgraded version of the Renault Samsung SM3. Since 2006, the Nissan Almera Classic model has been mass-produced in the Russian Federation.

The platform was borrowed from the Nissan N16 Pulsar. The fourth generation of the Japanese brand Nissan is being assembled at the AVTOVAZ plant (Tolyatti). Body modification B0, 1.6 liter petrol engine, 16 valves, power 102 hp.

In October 2021, serial production of the Nissan Almera Classic was discontinued. Since the factory warranty has expired for most cars, the owners carry out repairs and preventive maintenance on their own.

How often should I replace it?

Replacing the cabin filter of a Nissan Almera Classic is simple, and the principle of operation of the system is intuitive. In accordance with the instructions in the operating manual, the replacement interval for the interior cleaner is 15,000 km. The equivalent of one year, depending on actual mileage.

If the technical equipment is actively used in rough terrain, gas-filled, dusty areas, reduce the prevention period by a third.

Having replaced the cabin filter on a Nissan Almera Classic yourself, you will find dust and the remains of leaves on its surface. Car exhaust, soot, and road pollen settle on the filter fiber, impeding natural circulation.

Many car enthusiasts agree that it is better to replace the filter at the end of summer, closer to autumn. Justifying that humidity increases, there is less dust, and it rains more often.

Other drivers update the purifier only in November, when the leaf fall period is over. In general, each of these intervals is acceptable.

Choosing a cabin filter

By default, Nissan Almera Classic is equipped with an original filter with catalog number 27891-BM401-KE. However, most motorists cannot afford to buy an “original”, since the average cost is from 850 rubles.

On store shelves there are alternative options that are 200 - 300 rubles cheaper. There is no point in overpaying for a brand or branded packaging.

However, each owner decides independently what is his priority. Other Nissan owners prefer cleaners with carbon filler. The price of such a product is from 1000 rubles and above.

High-quality analogues

  • Knecht LA122, 520 rubles;
  • Sakura CA-1875, 650 rubles;
  • Delphi TSP032498, 400 rubles;
  • Japanparts FAA-NS5, 350 rubles;
  • MANN CU2369, 560 rubles;
  • Coal Corteco 80000852, 1100 rubles.

Instructions for replacing the cabin filter on a Nissan Almera Classic

  • The process of replacing the cabin filter of the Nissan Almera Classic is in many ways identical to models such as Nissan Pulsar, Sentra, Bluebird Sylphy, Almera Tino.
  • Preparatory stage: rags, flat-tip screwdriver, new filter element, antibacterial air conditioner spray.
  • Sequencing:
  • We place the car on a level surface, open the front doors, and provide unhindered access to the dashboard;
  • Open the glove box and remove all the contents from it;
  • In the lower part, at the base, we snap off the plastic clips;
  • At the top, disconnect the damper tensioner;
  • We remove the glove box; behind it is the purifier housing.

Open the lid, remove the filter, and spray liquid to clean the air conditioner evaporator with an aerosol. We lay the new element in the “UP” direction upwards and assemble it in the reverse order.

Loading…

Source: https://yaponskie-auto.com/zamena-salonnogo-filtra-nissan-almera-classik/

Changing the cabin filter Almera Classic

The main task of the Almera Classic cabin filter is to protect people in the car, as well as its interior, from dirt, dust, exhaust, and other harmful substances. Over time, the cabin air filter wears out and becomes clogged. Therefore, checking it regularly is a necessary maintenance procedure.

To change the air purifier, it makes no sense to contact service centers. This operation is quite simple and not difficult to cope with.

When and why to change the cabin filter?

This inconspicuous detail is located in the Almera Classic inside the glove compartment. As a rule, the need to replace it arises when a persistent and unpleasant odor appears in the cabin.

The filter should be replaced every 10,000 km, when driving around the city, after 20,000 km when driving combined (country routes, city, village roads). The more it gets dirty, the higher the quality of cleaning, but the worse the ventilation system performs.

You can also determine when it is necessary to change the air filter visually. It will be heavily soiled or damaged. Frequent fogging of windows or extraneous noises when the ventilation is turned on indicate a need for replacement.

It is also advisable to replace the cabin filter when the leaf fall ends. By this time it will already have collected dust and poplar fluff. In autumn, the leaves begin to rot, and a musty smell appears in the Almera Classic interior. Therefore, it is recommended to change the air purifier in the autumn. In winter there will be no dust, and the air filter will last well until summer.

If your car has air conditioning, then using a clean cabin filter is necessary. This is due to the fact that if the evaporator becomes clogged, the air supply to the car interior will stop.

The Almera Classic air filter cannot be restored. Sometimes it is possible to revive them by blowing them out, but it will not be possible to completely restore them.

Which cabin filter to choose?

The cabin filter consists of a special filter element. Odors, various harmful substances, and impurities pass through the layers of such an element, settling on the fibers, thereby purifying the air. The air purifier is a rectangular design. Inside it there is a multilayer corrugated material. It is capable of holding up to 96% of dust.

There are two types:

  • simple - it is based on an element made of fibrous polypropylene;
  • carbon – activated carbon is placed between polypropylene plates.

In addition to the original Almera Classic cabin filter, there are also its analogues:

  • NAC CCF0116
  • Sakura CA-1875
  • MANN-FILTER 7799CH
  • Japanparts FAA-NS5
  • FORTECH FS013

The process of replacing the cabin filter Almera Classic

If the air purifier is not replaced in a timely manner, the fan begins to malfunction. Because of this, the level of humidity inside the car increases, and parts may begin to fail. The following may be susceptible to breakdown: air conditioner, stove or small parts susceptible to corrosion. Therefore, it is recommended to change it regularly.

Selection rules

When choosing a cabin filter, it is best to follow the manufacturer's recommendations. The original spare part is produced under article number 27891-BM401-KE, its approximate cost is 450-480 rubles.

There are circumstances when the “original” part is not available, and the filter needs to be replaced. In such cases, you can pay attention to analogues that are suitable for a given car: they can be found under article numbers AG549CF or FS013. The cost of such components is slightly lower, but the quality is at the same level.

  • single-layer (simple) - they are based on paper or fabric;
  • multilayer (carbon) - the composition includes activated carbon, which has a higher degree of air purification from gases and odors; Because of this, the filter element must be replaced more frequently.

This is interesting: Velcro tires: which ones to choose for cars and SUVs, reviews

Replacing the cabin filter on a Nissan Almera

Among residents of the post-Soviet countries, the Nissan Almera Classic car model is especially popular.

If we take the price-quality ratio as a selection criterion, then this machine will be in the leading position in the ranking. The car belongs to the budget class, it is easy to maintain, and at the same time, many technical operations in it can be easily performed by a person who does not have extensive knowledge of the ingenious design features of this mechanism.

A striking example of this would be replacing the cabin filter, which you can easily do yourself.

It requires a cabin filter

There is a lot of controversy among car enthusiasts about the question: how important is it to regularly replace the cabin filter? It is quite obvious that people who pose the question this way do not fully understand the importance of this device. But it’s worth knowing that in addition to the fact that it plays a big role in the stable operation of the car, it also takes care of the health of the driver and passengers.

At the same time, people do not always appreciate such care and do not pay due attention to its timely replacement, and if they do it, it is not with similar quality attributes, but with devices made with their own hands, which, of course, should not be done, because such “filters » will not be able to provide the proper level of cleaning.

Why is it necessary to replace the cabin filter?

imperative to change the filter periodically , otherwise various undesirable microorganisms will most likely form on its surface, the effect of which on the human body will be unfavorable.

An untimely replacement of an interior cleaner turns into an optimal place for the spread of fungi and mold, which will subsequently be very difficult to remove. This is largely due to the fact that the dirty filter is located in a well-heated place, where, moreover, there is high humidity.

In addition, the evaporator of the air conditioning system is located near it, but the most important thing is that light does not enter here. Consequently, the sun's rays, which could exert their positive influence by eliminating harmful substances, simply cannot do this.

But the greatest danger to human health is posed by synthetic models of cleaners that are not of high quality and price. The same cannot be said about purifier models from companies that care about their own reputation: to produce filters, they use materials specially treated with antibacterial impregnation. Accordingly, the cost of such devices is higher.

However, even all these visits cannot provide a complete guarantee that various harmful bacteria will not form on the surface of the cleaner. During operation, the antibacterial effect of impregnations gradually decreases.

As a result of the filter's efficiency decreasing, harmful microorganisms can enter the human body through the air channels. This should not be allowed, and you should also be aware that their impact will be especially felt by elderly passengers, people with reduced immunity and children.

When is it necessary to replace the cabin filter?

The cabin filter needs to be changed in any case. How often to do this: officially, time periods, or even more correctly, mileage intervals, are indicated in the regulatory standards for the operation of purifiers. But in practice, it is best to focus on the level of actual filter contamination.

Replacing the cabin filter

On a Nissan Almera Classic car, you do not need to use special tools to replace the wiper.

We can remove the filter at the last stage, but to get into it, we first need to open the glove compartment and put it in order.

There are special latches on the side of the glove compartment; you need to turn them towards yourself, after which you will also need to lift them up.

After this we can remove the glove compartment. To do this, open it completely and remove it from its usual location. In front of us is the filter cover.

There are also latches here. They need to be lifted up to gain access to the purifier itself.

When the cover is removed, we can pull out the old filter. Before inserting a new one, you must first carefully inspect and clean the area where it will be installed. If mold or other harmful organisms are found, the area must be treated with special antibacterial agents.

It is important for the filter to work properly by placing it appropriately. The best way to navigate is by the arrows. You will be able to read the labels on the purifier when it is correctly installed in its seat.

This is how easy it is for you to change the old cabin filter of your Nissan Almera Classic with a new one. As you can see, there is nothing complicated about this. Do not forget to periodically check its condition and, if necessary, replace it, because the well-being of all passengers and yourself will depend on this.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]