Purpose of the cabin filter on Lanos
When driving a car, air enters the cabin, which contains harmful substances. This is not only dust, but also carcinogenic substances from car exhaust. The cleaner also protects the driver and passengers from the smell of the antifreeze liquid that is used to wash the windshield of a Lanos car. Breathing vapors of antifreeze liquid is contraindicated, since it contains isopropanol, which contributes to headaches.
Air enters the car interior from the street through air ducts. Many drivers do not pay attention to air purification filters, and some do not even know about their existence. Cars began to be equipped with air purifiers in 1991, but not on all models. It is worth noting that Lanos was produced with air purifiers, which, as befits such devices, tend to become clogged. If the cleaner becomes clogged, it needs to be replaced. If you do not replace a clogged cabin filter, the driver and passengers risk their health. The absence of a purifier or its prolonged use leads to the following harmful substances entering the interior:
- Tire dust
- Wheel rubber particles
- Asbestos from brake pads
- Bacteria and viruses
The exhaust contains more than 200 toxic substances, which today are purified using catalytic converters. However, how many conscientious drivers use catalysts or do not replace them with spacers when they fail?
We independently replace the cabin filter in a Chevrolet Lanos
The filter is necessary in order to retain street dust and other substances that are extremely harmful to our body, preventing them from penetrating into the interior. As a result, by promptly changing the filter material, you will save not only clean air inside your car, but also maintain comfort.
New air cleaning element
According to the recommendation of the automaker Chevrolet, the Lanos cabin filter needs to be changed every 15-20 thousand kilometers. Follow this rule and the atmosphere in the cabin of your car will not only be comfortable, but you and your passengers will feel great.
Principle of operation
The filter element is a piece of corrugated paper. The structure of the paper allows only air to pass through, and small particles of dirt and dust remain on it. Over time, it becomes clogged and makes it difficult for air to pass through it freely. This leads to a deterioration in the quality of heating and increased loads on the heater fan, which negatively affects the duration of the electric motor and increases the humidity in the car, which, in turn, leads to fogging of the windows.
Every driver knows well where the cabin filter is located, located in the engine compartment, under the windshield on the passenger side. It can only be seen when the cover is removed.
Where is it located?
If you are still an inexperienced car enthusiast, you probably still don’t know where the Chevrolet Lanos cabin filter is located, and even more so, you don’t know how to change it. It is located on the left side of the engine compartment in a special niche next to the windshield. The location is quite good, because to replace it you will not need to remove any additional components or parts.
Location of the element being replaced
Where is the filter located?
The cabin filter in a Chevrolet Lanos is located behind the air intake grille. The original element that is supplied with the car by the manufacturer has the article number CU 17 003. The cost of this device starts from about 600 rubles. However, many owners of this vehicle often purchase and install an analog cabin filter, since its price is an order of magnitude lower and it is in no way inferior in quality to the original.
The Chevrolet Lanos manufacturing plant, in its technical operating conditions, recommends replacing this filter every 20,000 km. This is especially important if the car owner has any allergic reaction, for example, to pollen. If you replace the cabin filter in a timely manner, this will help get rid of not only dust and other contaminants, but also the unpleasant odor, which, thanks to the device, does not penetrate into the cabin.
Sometimes experts recommend changing the cabin filter in a Chevrolet Lanos every 10,000 km. This is considered ideal. It is necessary to take into account the time of year, the mileage of the car, and the well-being of those who use the car most often.
A faulty cabin filter can cause great harm to the driver and passengers. Particular attention should be paid to the functioning of the filter in a large city, since it is in such places that the largest number of pollutants are localized. When purchasing a used car, the cabin filter must be changed immediately.
Where is SF on Lanos?
In 2008 Chevrolet Lanos cars, the equipment is located at the glove compartment level.
An air intake is located above it. The location of the filter system does not change, regardless of whether the vehicle is equipped with air conditioning. In order to reach the air conditioner, you should go from the side of the engine compartment.
When to change the cabin filter
The filter system in Lanos cars is replaced after every 10,000 kilometers. You need to change the device if:
- soot appears on the inside of the windshield;
- air ducts in the ventilation and heating systems become clogged;
- Dust appears on the front panel even with the windows closed.
ATTENTION! If the ventilation system does not work properly in cars equipped with air conditioning, the evaporator breaks down, which leads to a decrease in the efficiency of the air conditioning system.
If at least one problem appears, it can be judged that the system was not installed at the factory. This requires installation yourself.
Types of cabin filters for Lanos
Before you understand the issue of replacing the cabin filter on a Lanos, you should find out what types of cleaners are there and how do they differ? Devices differ in the material from which they are made. They come in the following types:
- Conventional or barrier - they are made from paper, as well as natural and synthetic fabric. Through this composition, small impurities are retained in the air. Conventional cabin filters clean the air of dust and insects. It is worth noting that filters are not made only from paper, as this is prohibited by technical requirements. After all, cellulose helps create favorable conditions for the growth of bacteria.
- Carbon - an additional layer is activated carbon, which helps absorb harmful gases that are present in the incoming air. Compared to a conventional purifier, carbon filters help not only filter the air from dust and insects, but also from harmful gases. Over time, if the carbon purifier on Lanos is not replaced in a timely manner, this will lead to a decrease in the absorption properties, so the filter will only clean the air from dust and insects
- Polyphenol-coated carbon is a more advanced class of cleaners that additionally have the property of neutralizing allergens. Such devices are made by applying a layer of activated carbon on one side and a layer of polyphenol on the other. They protect the driver and passengers from air containing allergens entering the cabin. Such filters cost more than the first and second options, but it is rational to use them only in autumn and spring
- Electret - have an additional charged layer of thin fibers that attract the smallest contaminants in the air. They retain 99% of all the smallest impurities - plant pollen, fungal spores, various dust, as well as soot, smoke, etc. Electric current is supplied to such devices
- Combined - these purifiers combine the capabilities of carbon and electret devices, which provides air filtration in several levels. Such devices are the most expensive, but at the same time they have maximum cleaning efficiency
We recommend: Idle speed floats after cleaning the throttle valve.
Regular and carbon filters were installed on Lanos from the factory. However, if necessary, you can independently install more effective cleaning devices, protecting yourself from inhaling harmful air.
How does the cabin filter work?
The cabin filter is a multi-layer product made of synthetic fabric or paper. Its main task is to prevent small particles such as dust, pollen, soot and spores from entering the cabin. This happens by filtering air through several layers of material with different pore sizes. In addition, most modern filters are electrified, which makes it possible to more effectively capture the smallest dust particles. If the purifier has a carbon layer, it is able to neutralize unpleasant odors and trap toxic fumes.
According to the manufacturers, the cabin filter in the Chevrolet Lanos should be replaced every 20 thousand kilometers. However, the average service life of a part is about 9 thousand kilometers. This is the result of the heavy pollution of modern cities, as well as the high concentration of dust in the air. In addition, the part becomes dirty especially quickly in the spring and autumn seasons. This is due to the fact that during these seasons a lot of large debris, such as leaves or fluff, gets into the air conditioning compressor. Many experienced car enthusiasts advise changing the cleaner twice a year, at the end of these seasons.
Naturally, no one is immune from premature filter contamination. You can determine that the filter is clogged by foggy windows, an unpleasant odor inside the car, and weak pressure from the stove or air conditioner. Another sign is a quickly developing layer of dust in the cabin. If you notice these signs, the cleaner should be replaced as soon as possible, otherwise it can lead to very unpleasant consequences.
Selecting a new filter
Before installing a filter system on a Chevrolet, you need to select it. Filters are:
- Dusty. For its manufacture, non-woven material is used, which filters dust and large particles.
- Coal. These adsorbent filters limit the possibility of dust entering the cabin and also ensure the neutralization of unpleasant odors and harmful gases.
A variety of cabin filters for vehicles are produced, which allows the car owner to choose an acceptable option for himself:
- This is a dust filter that is low in cost and therefore available to a wide range of customers. The device effectively cleans the interior of dust and polluting microparticles, which ensures a healthy and hygienic microclimate. Due to the simplicity of the design of the device, ease of installation is guaranteed.
- RAF Filter. This is a highly efficient device that has three layers of filtration. The first of them is produced using an antibacterial enzyme, so pathogens do not spread inside the car. The second layer is developed on the basis of sodium bicarbonate and activated carbon, which ensures high-quality elimination of unpleasant odors. The third layer is designed to block allergens.
- When using a filtration system, dust and unpleasant odors are effectively eliminated. For impregnation, a biocidal protective substance is used, which ensures a complete fight against bacteria and microorganisms. The parameters of the device are ideal for the air duct of a Lanos car.
- The carbon filter is produced by a Czech company and provides reliable protection of the interior from unpleasant odors and dust. High-quality manufacturing materials ensure long-term operation of the system.
Cabin filters from domestic and foreign companies have different technical characteristics, according to which they are selected.
Replacing the filter
Replacing the cabin filter in a Chevrolet Lanos can be done either at a service center or independently. If you decide to change the cabin filter yourself, then you need to stock up on a Phillips-head screwdriver, a new filter, rags and other available tools.
If you are replacing the filter yourself for the first time, it is recommended that you first watch a video where the entire replacement process is discussed in detail. In any case, you first need to find a cabin filter. The replacement process itself consists of several activities that should be performed:
- Start the engine and set the wipers to a vertical position, as they should not become an obstacle when replacing the filter.
- Open the hood and unscrew the plastic trim (another name for it is the cover). Below it is the cabin filter. When unscrewing the screws securing the cover, you should not use much force, as this may damage it.
- After unscrewing the cover, it may not be dismantled. Then you will need to open the hood harder, and then it can be easily removed.
- Then you need to remove the rubber seal covering the engine. You need to remove it very carefully. If the seal is damaged, it must be replaced with a new one. Its cost is low.
- Then you should replace the old filter with a new one. After the filter is installed in place, all parts are assembled in the reverse order.
Some qualified specialists advise inspecting the filter after removal and, if there is only dust on it and there is no damage, then clean it, rinse it and install it in its original place. This is not worth doing! The cabin filter is not an expensive purchase, however, its benefits are quite large. Therefore, it is imperative to install a new one in place of the old filter. If this is not done and the old one is returned to its place, then in the winter the stove will not function normally. This will create an uncomfortable environment for the driver and passengers.
If after replacing the filter, no changes are felt, then it is recommended to pay attention to the air duct. It needs to be cleaned with a powerful air stream. If this does not help, then you need to repeat removing the equipment and using special solutions to clean the entire air purification system. It is noted that after cleaning each part, it must be thoroughly dried and reinstalled.
We recommend: How to properly bleed the brakes - all the nuances, procedure
What will you need to replace the cabin filter of Daewoo Lanos?
This procedure falls into the category of simplest service operations. Even a novice driver can handle it. Specialists change the filter in 5-10 minutes. To replace the filter on a Daewoo Lanos, we cannot do without:
1. Phillips screwdriver
2.New filter element
It is worth noting that there are many models of cabin filters. But their entire range can be divided into 2 main categories: traditional mechanical cleaning filters and active filtration systems (based on activated carbon). It is up to the driver to decide which one to choose. Mechanics are more affordable. Active filtration eliminates not only dust, but also foreign odors. Carbon filters, of course, are more expensive than classic foam filters.
Our Lanos: how to change the cabin filter
Road dust, exhaust fumes, dust from worn pads and clutch discs, allergens from flowering plants are not the best companions on the road. This is the answer to the question why an air filter is installed in the cabin. True, not all. On some, even once new, Daewoo Lanos you will not be able to find a cabin filter. It simply wasn't installed from the factory. Today we’ll figure out where the cabin filter is located on Lanos, how to choose it correctly and how to replace it. Go.
When to change the Lanos cabin filter, signs of wear
All air that is sucked into the cabin must be cleaned. Otherwise, we get not only health problems, especially in a big city, but also a number of other troubles:
- The appearance of soot on the inside of the windshield.
- Clogged air ducts of the ventilation and heating system.
- Constantly dusty front panel even with the windows closed.
- In Lanos with air conditioning, there is a risk of quickly destroying the evaporator and reducing the productivity of the climate system.
The plant recommends replacing the cabin filter on Daewoo Lanos once every 10 thousand mileage , however, experienced drivers try to change it in conjunction with preparation for the spring-summer period, so that the filter works perfectly in the spring.
Where is the cabin filter on Daewoo Lanos and which one is better to choose?
The cabin air filter on Daewoo Lanos is installed at the level of the glove compartment under the air intake and this does not depend on whether we have air conditioning or not. Access to it is provided from the engine compartment , as shown in the photo.
Here is the Lanos cabin filter
Before removing and changing the cabin filter, you need to unscrew the right side of the air intake.
Filters are divided into two categories:
- dust filter made of non-woven material, capable of cutting off only dust and larger fractions, inexpensive option; a carbon adsorbing filter that will not only prevent dust from entering the cabin, but will also filter out bacteria, microscopic plant pollen, and neutralize harmful gases and unpleasant odors.
The latter option is about 30% more expensive, but works an order of magnitude more efficiently. Of course, if we are ready to change the cabin filter on the Lanos every 3-5 thousand mileage, without question we can install a simple dust filter and inhale the city atmosphere that has a beneficial effect on the body. If we look into the future, it is better to buy a carbon cabin filter for Daewoo Lanos and enjoy clean air in the cabin for several years.
Carbon Korean filter Konner
Czech filter Profit
On the market today there is a whole sea of salon brands at prices ranging from $3 to $10-12 from a variety of brands, from Chinese no-name to venerable manufacturers:
- Xing cabin filter ), better than nameless companies, the cheapest on the market for 2021, price about 2 dollars, regular dust filter; Korean original GM with catalog number 096190645 , if not a fake, will last its 10,000 mileage, the price is exactly 5 dollars; Czech Profit with number 15212153 , for the same 5 bucks we get a carbon filter; German Mann with article CU17003 , regular dust, price about $9, according to reviews, good and reliable, additional articles - M218612029, ZZ07002 ; for $12 you can even buy a Japanese AMC with catalog number DC7109 .
How to replace the filter?
You can replace the filtration system at a car service center. On average, the cost of the service will be 500 rubles. In order to save money, install the filter yourself in accordance with the instructions:
- The left wiper is pre-installed in a vertical position in the center of the windshield. It is recommended to turn off the car completely
- Open the hood and find the air intake. Using a Phillips screwdriver, unscrew the plastic screws that are on it. They are located on the right side of the air intake.
- The base of the air intake cover is characterized by the presence of a rubber seal made in the form of a strip that needs to be pulled out.
- After removing the air duct cover, it is recommended to remove the storm drain, which protects the filter from water entering it.
- Completing all of the above steps ensures access to the air duct inside which the filter is located.
- If a filter was previously installed in the car, remove it.
- Inside the hatch, you need to wipe everything with a damp cloth to prevent dust from getting on the new filter. Leaves, fluff, dirt, etc. are removed from the air duct.
- If there is no factory filter system, a new device is inserted into the air duct. It must be mounted behind a panel, which is designed to protect the air duct from large polluting particles.
- The filter is pushed behind the area of the protective panel and installed in the seat as tightly as possible.
- Work on installing the filter is carried out carefully, as it may fall through to the stove fan. When installing the filter system, you need to ensure that there are no distortions. The filter is installed tightly in place.
- At the final stage, the air duct is assembled in the reverse order. It is recommended to check the operation of the system. To do this, you need to climb into the car and assess the air quality.
Lanos is a popular brand of cars that are owned by many car owners. To ensure comfortable movement in the vehicle interior, it is recommended to regularly replace the cabin filter.
How to replace
To replace the cabin filter on a Chevrolet Lanos, we will need a shaped screwdriver and a new element (with article number 9.7.32), and just a little free time.
- Remove the right windshield wiper or raise the blades to a vertical position (this can be done as follows: turn on the ignition, then the wipers, and at the moment when they are in a vertical position, turn off the ignition).
- Open the hood and unscrew the fastening of the decorative trim on the windshield on the passenger side (there are 4 spacer screws, the screws need to be unscrewed and the latches pry off with a screwdriver).
- Remove the passenger side hood seal part.
- Under the trim there is an air intake with a plastic cover on it; it needs to be removed.
- We put our hand into the air intake and use the special handle to pull out the old element.
- We remove all dust and dirt that has accumulated in the air intake during operation. It is better to do this with a vacuum cleaner or a damp cloth. It is important to remove everything, otherwise it will all end up in the heating system, and then in the car interior.
- Then you need to install a new element in place of the old one. To simplify the task, you can tie a piece of rope to the handle, so that in case of unsuccessful installation you can remove it without resorting to dismantling the fan. Installation should begin from the far (wide) part and move towards the narrow part.
- After installation, we check the operation of the stove in all modes.
- If everything is in order, then you need to assemble all the elements in the reverse order (if necessary, replace the spacer screws and the hood seal).
The method described above will help you replace the cabin filter on a Chevrolet yourself, without the help of special service centers. You can select a cabin filter for a Chevrolet Lanos by article number. Frequent replacement will prolong the operation of the entire heating system as a whole. And will allow you to enjoy purified air in your car.
Chevrolet car repair manuals and tips
Cabin Filter Replacement Guide
The Chevrolet Lanos cabin filter, like any other, traps dust and other volatile substances harmful to the human body, preventing them from entering the cabin. Therefore, timely replacement will save clean air in the interior of the car and maintain comfort and freshness.
Any manufacturers, including the concern that produced the Chevrolet Lanos, recommend replacing the cabin filter every 15-20 thousand kilometers. By following this unspoken rule, you can ensure comfortable conditions at any time of the year.
There are two ways to replace the Chevrolet Lanos cabin filter. It would be optimal to carry out the replacement in a specialized car service, since sometimes this is accompanied by the disassembly of a large number of vehicle parts. This takes a lot of time and effort, so it will be natural to delegate this work to professionals who will do it quickly and efficiently.
The second way is to change the cabin filter yourself. The more carefully a car owner takes care of his car, the longer it will serve faithfully. Therefore, you need to approach filter replacement with all responsibility and change it as it gets dirty, especially if you do it yourself, because you won’t have to spend money on a car dealership.
Note! The filter is cheap by modern standards, but an optimal microclimate in the cabin is very expensive. On average, the price of a cabin filter varies from 180 to 280 rubles, which, you see, is nothing.
Replacement process - what, where and how?
Unscrew the bolts on the top panelUnscrew the bolts on the top panel
Before you start replacing the filter on a Lanos, no matter how strange it may sound, you need to get into the car, turn on the ignition and put the wipers in a vertical position. This is done so that the wipers create as little interference as possible when removing the panel and subsequent filter replacement. The tools you will need are a Phillips screwdriver and a brand new filter, respectively.
After manipulating the wipers, you need to open the hood and unscrew the plastic trim, panel or cover, each master calls it differently. Directly below it is the cabin filter.
Note! Do not apply too much force to the screwdriver or press with all your might. This will not lead to anything good, only damage to the case. Efforts must be made, but everything must be in moderation, and then the process will go as it should.
Removing the plastic coverRemoving the plastic cover
Once the plastic cover is unscrewed, attempting to remove it will result in failure. There is nothing mysterious about this - you just need to lift the hood a little more, holding it with your hand, and the panel will come off easily and simply.
Next, you need to carefully remove the rubber seal from the metal shield of the compartment where the engine is located. If you damaged it, or it was already damaged, it doesn’t matter, you need to replace it with a new one, it is sold at any auto store and is inexpensive. After this, you need to stick your hand into the cavity and pull out the old cabin filter.
Installing a new cabin filter on LanosInstalling a new cabin filter on Lanos
Some DIY experts suggest inspecting the filter for further suitability. If only dust has settled on it, you can shake it off or vacuum it and put it back in place. If it is wet and completely saturated with dirt, then naturally you should throw it away. Otherwise, even after cleaning, the stove fan will not be able to circulate air into the cabin, and it will heat up very slowly, which is extremely uncomfortable. And the easiest way is to do neither one nor the other; we repeat, the filter is inexpensive, so a complete replacement is the best option.
Note! A clogged filter is a source of harmful microbes.
Once microbes get into the lungs, they will begin to do their “dirty deeds,” and if children are often transported in the cabin, this is extremely undesirable. You can't skimp on your health. Add to this a most unpleasant odor that can not only poison the air, but also be successfully absorbed into the upholstery of seats and the upholstery of the car. And then the scales will most likely tip in favor of a complete replacement rather than cleaning.
New cabin filter for Chevrolet LanosNew cabin filter for Chevrolet Lanos
After all the replacement manipulations, all parts must be assembled in the reverse order. Many car owners complain that replacing the cabin filter does not produce any visible positive changes.
Note! If there are no results from replacing the filter, the reason may be a clogged air duct - it should be blown out with a powerful stream of air.
And if this doesn’t help, then the matter is more serious. You will have to remove the entire system, disassemble it, thoroughly clean it using special compounds, then dry it and put it back in place. This process is very labor-intensive, taking not only a lot of time, but also a large number of nerve cells. Therefore, it is still worth contacting a workshop where all work will be completed with high quality and quickly. And finally, when buying a cabin filter, you need to make sure that it fits the Chevrolet Lanos car, so that you don’t have to pay extra money in case of an error.
Sources
- https://lanosovod.ru/salonnyj-filtr-na-lanose.html
- https://carwin-motors.ru/raznoe/zamena-salonnogo-filtra-na-lanose.html
- https://OFiltre.ru/avtomobilnyj/salonnyj/lanos
- https://adaptsport.ru/obsluzhivanie/shevrole-lanos-zamena-salonnogo-filtra.html
- https://turboracing.ru/remont-auto/zamena-salonnogo-filtra-chevrolet-lanos/
- https://avtozam.com/daewoo/lanos/zamena-salonnogo-filtra/
- https://promremont34.ru/ustrojstvo-avto/kak-zamenit-salonnyj-filtr-na-shevrole-lanos.html