How to increase ground clearance on Renault Logan

Why increase ground clearance

Initially, Renault Logan models, both 2008 and 2014, are produced by the manufacturer with a fairly impressive ground clearance, but, as practice shows, such ground clearance is insufficient, for example, for Renault Logan 2 it is only 155mm. Experienced car owners make all sorts of modifications that help increase the ground clearance of the “iron horse”.

As practice shows, the most popular and sought-after method to increase ground clearance is to install all sorts of specialized spacers, which can significantly increase ground clearance. There are currently many video reviews about this on the Internet. Everyone knows that Russian roads sometimes leave much to be desired, and you constantly have to overcome various obstacles, and every driver worries about his car, wanting to overcome the roads easily, without fear for the car, so everyone strives to increase the ground clearance. And it doesn’t matter what ground clearance the Renault Logan car has, it doesn’t matter; in most cases, the owners increase it.

How to increase ground clearance:

Perhaps one of the most popular methods for increasing clearance has been the installation of non-original shock absorber springs. The installation carries several significant advantages at once - this is when the replacement of a part is carried out as a result of its significant wear, which negatively affects the clearance. Replacing springs in no way negatively affects the stability and controllability of Renault Logan 2 of 2021 and earlier years of production. But some other decisions can be harmful.
Another way is to replace the rims with several sizes larger. Let us immediately note that this may negatively affect fuel consumption and the behavior of the car, but it will allow a slight increase in ground clearance. There are many examples of increasing the lumen in this way, and there are many thematic videos.
To get an effective, but short-term effect, you can replace the rubber elements under the shock absorbers. The effect of the procedure will be short-lived, but noticeable. This option for increasing the clearance is good because every car owner can do it independently, without making any investments.
Over the past few years, supplies for interturn shock absorbers have become widespread. This method of increasing ground clearance on the French Renault Logan is effective and efficient. Whatever the ground clearance, you can always increase it yourself.

Installing such elements can sometimes improve the performance of shock absorbers, which will have a positive effect on the handling of the car.

However, there are no downsides. Each conversion has a short service life due to the use of polyurethane, which wears out quickly. Installing spacers on a Renault Logan car of any generation is quite feasible with your own hands.

If you use high profile tires, you will definitely get a 20mm increase in clearance. What is the ground clearance of the Renault Logan model of any generation? 155mm, so plus 20mm is very noticeable. As a result of the increased ground clearance, there is no deterioration in the characteristics of the car, and no deviations in behavior are observed, and thus, this method is the most effective and simple, since replacing tires should not be a problem for each car owner.
Installing specialized spacers on the support struts of a Renault Logan 2 car is the most common and most dramatic method of increasing ground clearance. This method is good because the effect of growth can reach plus 30mm, but in this case there are also disadvantages. Increasing the clearance has a negative impact on the car’s handling, since as the height of the “iron horse” increases, behavior on the road worsens. This method was more suitable for those car owners who drive most of the time on poor road surfaces.

Experienced specialists recommend that drivers contact services when installing spacers, since this process must be competent and responsible, and it will be very problematic for an ordinary car enthusiast to carry out the installation without special skills and knowledge.

Summarizing

As a result, there are many ways to increase Logan clearance. The methods vary in labor intensity, energy consumption and cost, but they all cope with their main task - increasing the vehicle's ground clearance. The average car enthusiast can only answer the question of which method is preferable for him.

Interesting articles

What is the ground clearance of Renault Logan

Ground clearance, or, as it is also called, ground clearance, is a segment from the lowest point of the vehicle body to the surface of the earth. But Renault Logan manufacturers measure this gap in various ways. Therefore, the clearance from the shock absorbers, crankcase, or exhaust pipe is less than the value specified in the instruction manual.

Important: for Russian roads, ground clearance is important, so buyers pay special attention to this parameter.

During the existence of Renault Logan, this segment has changed several times.

Ground clearance 155 mm. This parameter is for first-generation vehicles produced in 2004, 2005, 2006, 2007, 2008 and 2009 in a sedan body and equipped with front-wheel drive and a 1.4 MT or 1.6 MT gasoline power unit with a power of 75 or 103 hp.
Ground clearance 147 mm. The updated first-generation Renault Logan models, released from 2009 to 2015, have this ground clearance value.
Second generation. Cars produced in 2014, 2015, 2021 and 2021 have this length of 155 mm. All Renault variants of these years were created with 4-door sedan bodies. The machines are equipped with a 1.6 MT power unit, the power of which is 82 or 102 hp. Options – Access, Confort, Luxe Privilege.

How to change ground clearance?

Each driver uses his own car to transport goods. The more a car is loaded, the lower its ground clearance becomes. In addition, the state of Russian roads in 2021 forces motorists to increase the clearance of their vehicles.

To prevent the car from sagging too much due to overload, and to increase ground clearance, it is recommended to do the following:

Mount the spacers on the support posts. This method will increase the value of this parameter by 3 cm.
Replace shock absorber springs. The method is suitable for owners who have been driving Renault Logan for a long time. Updating the springs allows you to increase the stability of vehicles on the road.
Install new wheels of larger diameter.
Renew rubber bands of shock absorber springs. This option helps to increase the lumen, but for a short period of time.
Install interturn spacers. This action not only increases the distance from the ground to the vehicle, but also improves the performance of the shock absorbers.

Please note: manually increasing the ground clearance has a negative effect on the car's handling. It also leads to rapid wear of spare parts that have different design loads.

The safest option for increasing the clearance between the car and the road, which does not affect control and wear of parts, is to replace tires and wheels. This method allows you to increase the clearance by 2 cm.

Ground clearance (ground clearance) Renault Logan

The Renault Logan car is a budget car that was developed by a French company specifically for the markets of developing countries. The main facilities are located in Romania.

The first Dacia models appeared on the market in 1999, and since 2005 the car has been produced in Russia.

One of the advantages of the car is its high ground clearance, around which there is a lot of discussion.

What is the real ground clearance of the first and second generation Renault Logan? What are the features of measuring this parameter? Is it possible to increase the ground clearance with your own hands, and how to do it correctly? Let's look at these points in more detail.

How to increase ground clearance on a car / Renault Logan / installing spacers /

Show Control Panel

Published: 31 Dec 2021 veröffentlicht
Hello everyone, in this video we will install spacers on a Renault Logan car, thereby increasing the ground clearance of the car. The height of the spacers is 30mm on the front suspension and 30mm on the rear, and we also had to install additional spacers for the rear shock absorbers. Make yourself more comfortable, it will be interesting.

Subscribe to my channel - clip-share.net/channel/UCYgMG0gIhGP87t05Rq-B4lQ?view_as=subscriber

Auto/Moto

Subtleties of measuring ground clearance in Renault Logan

The Renault Logan car has become famous for its reliability, stability and excellent technical characteristics. But the debate about ground clearance continues to rage.

This is easy to explain, because the car has to be operated in difficult conditions, and our roads are a test for any vehicle. At the same time, discussions are conducted not from the point of view of the disadvantages, but from the point of view of the advantages of a high ground clearance of the car.

If you believe the operating instructions for the car, the interior width is 1.42 meters, which allows us to classify the Renault Logan as a sedan. At the same time, the car's ground clearance is higher than that of other cars of the same class.

Most of all, Renault Logan is similar to domestically produced Lada cars, the ground clearance of which is only slightly higher.

It’s worth noting right away that the distance from the bottom point of the car to the road differs for the European and domestic versions of the car.

In the first case, this parameter is 15 cm (1470 mm), and in the second - 17 cm. In addition, for domestic versions, the clearance at different points may vary in the range of 15.5-18.5 cm.

These figures are truly impressive. If you measure the distance from the road surface to the upper point of the bottom and fuel system pipes, it will be about 20 cm. The filter and gas tank are located even higher.

It is interesting that these parameters are typical not for an empty car, but for a loaded car.

So, if the car has 15-inch wheels, five people are sitting in the cabin, and there are several bags of potatoes in the luggage compartment, the ground clearance will still be at least 17.5 mm.

This is enough for comfortable driving on our roads.

But some car owners are dissatisfied with the current state of affairs, because the declared 17.5 cm may not be enough for driving on a snowy highway or off-road.

In this case, many people think about increasing the ground clearance. This is done in several ways, which we will discuss below.

Ground clearance Renault Duster. We measure correctly

Even a schoolchild knows that ground clearance is the distance from the road to the lowest point on the bottom of the car. On the Renault Duster 4x4 it is stated to be within 210 mm, which, in fact, is not bad for a crossover of this class. The Nissan Terrano, on the basis of which the all-wheel drive Duster is assembled, has approximately the same indicators. Needless to say, geometric cross-country ability greatly depends on ground clearance.

Geometric cross-country ability of Renault Duster

As you can see, everything is fine with the approach and departure angles of the Duster; the ramp angle of 23 degrees is not God knows what indicator, but it is enough to cope with a country road or city curbs. The nominal ground clearance of 210-205 m m, depending on the type of drive, also allows the car to feel calm both on snowy city streets and on an easy walk to a picnic. Basically, that's enough. There is just one caveat. Clearance measurement parameters may vary. Here's a simple example.

Based on this simple diagram, it is clear that ground clearance is calculated differently and each manufacturer tries to maximize this sought-after indicator. In the case of Duster, history repeats itself. If we measure the distance from the ground to the resonator can, then 210 mm is clearly not enough. As a rule, the difference between the declared and actual ground clearance is about 25%. Well, let's try to make a forecast of what we can expect from increasing the ground clearance on the Duster by 25-30 mm, which is quite realistic. However, with an integrated approach to the issue, with the replacement of drives, complete reworking of the suspension, replacement of disks and tires, more convincing indicators can be achieved. As an example, the Polish dealer Dacia released a special version of the Duster for off-road use with a ground clearance of 270 mm. Here are its parameters.

Ground clearance of Renault Logan cars by year of manufacture

Many car owners are interested in the distance between the road and the bottom point of the body for Renault Logan cars of different generations (years of manufacture).

The following trends can be seen here:

First generation cars have a ground clearance of 15.5 cm. This category includes models of 2004, 2005, 2006, 2007, 2008 and 2009 - a sedan, with front-wheel drive and a gasoline engine with two types of engines 1.4MT, as well as 1.6MT (75 and 103 hp respectively).
Renault Logan first generation (restyling). These cars were produced from the fall of 2009 to the end of 2015. The ground clearance of these cars is slightly less than that of their predecessors - 15 cm (1470 mm). Often on forums you can find questions about what ground clearance the 2010 and 2011 models have. They are also included in this category and have similar ground clearance.
The second generation Renault Logan boasts slightly more ground clearance. For the 2014 Renault Logan in the new body it is 15.5 cm. The same applies to cars released later, in 2021 and 2021. All cars have a sedan body with four doors. If we consider engines, this category includes cars with a 1.6 MT engine with a power of 82 and 102 horsepower, as well as Access, Comfort, Luxe Privilage trim levels. By the way, Renault Logan cars 2015 and 2021 also have a ground clearance of 15.5 cm.

Why can the ground clearance vary for the same model?

The vehicle's ground clearance changes over the years, and the greater the distance the vehicle travels, the lower it becomes.

This is due to the fact that over time, shock absorber springs wear out and gradually sag. As a result, the ground clearance also decreases.

The wheels of the car also play an equally important role. So, if the car owner installed smaller wheels, the ground clearance will also decrease.

How to increase the ground clearance of Renault Logan?

At the beginning of the article, we noted that many car owners set the task of raising the ground clearance of the car in order to increase the all-terrain qualities of the car.

This can be done in several ways:

Use special tires and wheels of larger diameter. This is the easiest way to increase the ground clearance of Renault Logan. Initially, Renault Logan is equipped with 15-radius tires. This option allows you to raise the car by an average of 20 mm without losing controllability and ride comfort.
Change the shock absorber springs. If the car has traveled a considerable distance, it would be a good idea to replace its springs. As noted above, these elements wear out over the years and “sag.” As a result, the Renault Logan's ground clearance becomes lower. The advantage of this method is that the new springs have greater rigidity, and this significantly affects ride comfort.
The use of spacers under the support legs allows you to raise the car by an average of 20-30 mm (if you start from the factory clearance parameter). But with such design changes, the car becomes less stable when driving at high speed. In addition, some parts that are not designed to withstand excessive loads wear out. So drivers who often travel long distances are better off not resorting to this method.
Installing dampers between the spring coils. This is one of the safest and most effective ways to increase clearance. With the right approach, you can achieve an increase in vehicle height by 20-25 mm. In addition, the characteristics of the shock absorbers themselves are improved, becoming stiffer and “living” a little longer. But there is a nuance here. The installation of such gaskets is relevant only in relation to the rear springs, because the interturn interval is smaller there.
Replacing the rubber bands installed under the shock absorber springs helps, although not for long. It is possible to raise the car by 15-20 mm.

When raising the ride height, it is worth remembering the possible consequences for the car:

Deterioration of some technical characteristics;
Increasing the load on CV joints and reducing their service life;
Failure of shock absorber struts (due to incorrect installation of spacers);
Changing the wheel alignment angle and so on.

As practice shows, the safest way to raise the ground clearance is to replace a set of wheels and tires.

But before making any changes to the design of the car, it is worth considering whether you really need it.

The ground clearance of the Renault Logan is solid enough to leave it unchanged.

Is it possible to increase the ground clearance of Renault Sandero

Then the same operation is performed with the remaining wheels. As a result, the Renault Sandero should rise to a certain height, depending on the selected part.

The cost of the part itself will be much lower than the cost of new wheels with a larger diameter. Thus, we can conclude that this method is the most preferable for raising clearance.

In addition, you can raise the clearance yourself.

Ground clearance Renault Sandero

Bottom line Many drivers of the Sandero model of the year note that this method is really more effective. The difference in clearance can become quite noticeable.

At the same time, the difference will be even more noticeable when the car goes onto a dirt road or when driving onto a curb. It should be added that the car can change its driving properties.

However, in most cases, raising the ride height will not affect handling. Spacers on Sandero can be used with larger racks. This will allow you to raise the car. Also, the use of a spacer does not affect the condition of the Sandero shock absorbers themselves.

We increase the ground clearance on Renault Logan with our own hands: photos and videos are attached

In harsh Russian conditions on harsh Russian roads, car clearance is almost the primary parameter in choice for buyers. Therefore, based on these considerations, French engineers, when creating the Renault Logan II generation (2013 onwards - onwards), increased the ground clearance by 2 centimeters. But despite this, the Russian consumer’s attention to the younger brother has not diminished at all. For more than 10 years now, the Logan line of cars from Renault has carried the tradition of a truly people's car.

What is the standard ground clearance of Renault Logan

Despite the exact definition and method of measuring ground clearance in regulatory documents, each manufacturer makes measurements in its own way.

Depending on the year of production, the clearance height varied significantly:

2004-2009 Renault Logan ground clearance 155 mm.
2009-2014 the car's ground clearance was reduced to 147 mm.
2014-2017 the distance was again increased to 155 mm.

The ground clearance decreases by 2-3 cm as the load on the suspension increases. Carrying large luggage will lower the vehicle's value.

The main ways to increase clearance

The clearance of the first generation Renault Logan is 155mm, so its owners don’t really worry about curbs

Motorists who own a Renault Logan are not particularly concerned about the condition and ground clearance of their car, however, in order to once again be on the safe side against the treachery and surprises of our roads, it is sometimes worth thinking about how to increase the ground clearance even more. It’s good that there are all sorts of ways to do this, and the structure of the front suspension allows you to increase ground clearance and protect an overloaded car from sagging.

Use of special tires and rims

Wide tires for Logan 195/65 R15

The first and safest way is to replace tires and wheels of a standard diameter with a larger size, or from other cars (for example, wheels from a Kia Rio will not fit, be careful). Initially, Logan has 15-radius tires. This option for increasing ground clearance will allow you to add up to 2 centimeters in height and will not have any effect on ride quality.

Replacing shock absorber springs

On the left are springs with increased travel

Owners of Renault Logan cars that have a certain mileage should think about replacing the shock absorber springs, because the wear of this particular part in the suspension directly affects the ride height. The undoubted advantage of this method is that the new springs will be much stiffer than the old ones, and this will significantly affect additional driving comfort.

Selection by parameters

The design bureau has provided wheel sizes for its cars of 15 and 14 inches. In addition to these parameters, you need to add width and offset, as well as wheel bolt pattern and bolt length. We will indicate all parameters in a separate list below.

The wheel parameters for Logan should be exactly like this.

The recommended parameter is R14, R15 (14 and 15 inches).
Allowable bolt pattern is 4x100.
Wheel rim width – 5/5J, 6J.
Mating plane offset – ET43, ET
The diameter of the hub mounting hole is DIA1.

To clarify this data, we have collected all the information so that the reader does not have any unnecessary questions, and we will also talk about why R14 and R15.

The radius of a Logan wheel is a stipulated value adopted by the automotive standard and is denoted by the Latin letter “R”, respectively, the wheel parameter will look like this: R14 or R This abbreviation means the diameter divided by two, respectively, the wheel size is 15 or 14 inches.
Many car owners have heard the word bolt pattern, but not everyone can give a clear definition of this term. The bolt pattern is the distance between the centers of two bolt holes. Example - 4x100, the number 4 indicates the number of holes for mounting bolts, the number 100 indicates the distance between two opposite holes.
The width of the wheel is measured in inches and is designated on the back side with the letter J. Therefore, this designation will look like this: 5/5J, indicating a rim width of 5.5 inches.
The offset of the mating plane is the distance between the landing pad of the disk and the edge of its inner rim. This parameter is measured in millimeters and is designated as ET. The higher the ET number, the more the disc is recessed into the wheel arch.
As for the diameter of the hub hole, it is also measured in millimeters and is designated by three letters of the Latin alphabet - DIA.

These data should not be neglected when choosing wheels for Renault Logan, otherwise serious problems may arise during the operation of this vehicle. Also, do not neglect the size, as serious wheel runout may occur.

Reasons for making improvements

When released from the assembly line, Renault models initially have impressive ground clearance, but in many cases this indicator is not enough. Often, experienced car owners resort to various kinds of modifications to increase the ground clearance of the Renault Logan.

Among the most popular, which have become more widespread in practice and shown in various videos on the Internet, is the installation of various spacers that allow you to increase, sometimes significantly, the ground clearance of the Renault Logan. Indeed, in the difficult conditions of Russian off-road conditions, the main question for the driver, first of all, remains what ground clearance he has and whether he can overcome this or that obstacle without consequences for the car.

Recommendations from professionals

Renault Logan first generation restyling. These cars were produced from autumn to the end of the year.

Over the past few years, supplies for interturn shock absorbers have become widespread. Whatever the ground clearance, you can always increase it yourself. Installing such elements can sometimes improve the performance of shock absorbers, which will have a positive effect on the handling of the car.

Renault Duster tire size https: Each conversion has a short service life, due to the use of polyurethane, which wears out quickly. Installing spacers on a Renault Logan car of any generation is quite feasible with your own hands. Often, experienced car owners resort to various kinds of modifications to increase the ground clearance of the Renault Logan.

The main ways to increase ground clearance: One of the most common ways to increase ground clearance is to install different shock absorber springs.

This operation has several advantages:

The main ways to increase ground clearance:

One of the most common ways to increase clearance is to install different shock absorber springs. This operation has several advantages: replacing this Renault Logan part occurs as a result of wear, which negatively affects ground clearance. Also, this solution does not in any way affect, unlike other solutions, the controllability and stability of the machine.
Replacing wheel rims with a larger diameter. This may have a negative impact on fuel efficiency, as well as on the behavior of the car, but it will increase the Renault Logan's clearance by a few millimeters. Examples of increasing clearance in this way are quite common, and can be seen among many videos.
To obtain a short-term but effective effect, you can also replace the rubber elements under the shock absorbers. The effect will be noticeable, but short-lived. This option is good because any car enthusiast can carry out this procedure independently and without significant investment.
Interturn spacers for Renault Logan shock absorbers have recently become widespread on the market. This method is quite effective for effectively increasing the vehicle's ground clearance.

Also, installing these elements can to some extent improve the characteristics of the shock absorbers themselves, which will have a positive effect on the handling of the car.

However, the disadvantage of these transformations is the relative fragility of these elements, due to the use of polyurethane, which is subject to increased wear. Installing these spacers is not very difficult, although it is quite labor-intensive.

Use of higher profile rubber. Along with the effect of new tires, it is quite possible to get an increase in clearance of up to 20 millimeters, which is a significant figure in comparison with the total ground clearance of 165 millimeters. As a result of an increase in ground clearance in this way, there is no deterioration in any characteristics of the car or deviations in its behavior, thus this method is one of the most effective, especially since almost all car enthusiasts are able to replace tires.
The most widespread and one of the most radical ways to solve the problem with Renault Logan ground clearance is to install special spacers on the car's support struts. This method is notable for the most noticeable effect; the increase in ground clearance can reach 30 millimeters, however, there are some disadvantages here too. Increasing the ground clearance in this case affects the car's handling for the worse, since as the car's height increases, the behavior on the road surface worsens. This method is most suitable for motorists who spend most of their time overcoming various road surface defects.

Experienced auto mechanics advise that when installing spacers, contact specialized services, since this process carries a lot of responsibility, and installation without the appropriate special knowledge will be quite problematic for an ordinary car enthusiast.

How to increase ground clearance on a Renault Logan: it’s better to see once