If there is a frame
The frame itself is made of plastic. The license plate in the frame at the top and at the ends is pressed with hooks that hold it in a given position. At the bottom there is a wide strip that is removed before removing the license plates from the car.
Frames for license plates are available in several versions, which differ in the way the lower removable strip is attached.
Option 1
The strip is attached from the back to one latch along its entire length.
To remove it, just bend the frame with the number slightly towards you and use your fingers to pry the strip from behind towards the bumper. The latch comes unfastened and the strip is removed. The number is carefully removed from the fixing hooks using a top-down motion. To simplify the task, use a flat-head screwdriver.
Option 2
The bottom strip is first inserted into the end grooves, then fixed in the middle with two latches.
Dismantling the strip proceeds in the reverse order:
The number is removed from the frame, as in the first option.
Option 3
In this design, there are 2 locks securing it on the bottom strip. The sign is tightly inserted into the grooves located at the top and bottom along the entire length of the frame.
To remove a number, the locks on the bottom of the frame are opened towards the center.
The bar is lowered, removing the lower part of the sign from the groove. To release the upper part, just insert a screwdriver into the holes on the number, rest it against the plastic of the frame and lower it down. The number has been removed.
Anti-vandal frames and rules for their installation
License plates are often removed from cars for profit or other purposes by criminals. To prevent this from happening, owners install devices that can protect against theft. Anti-vandal frames make it almost impossible to remove the numbers.
But they can also lead to the driver being fined or having his license revoked. Protection must be selected and installed so that the sign complies with GOST.
If the motorist does not have a goal, in addition to saving from thieves, to make its elements difficult to distinguish, the main difficulty is attaching the frame. According to GOST, for this purpose, you cannot drill additional holes for bolts in the plate itself. That is, it is allowed to use only such protection that will be attached using secret fixing elements or transition elements. For them, holes are usually made in the bumper of a car, which is not stipulated by GOST, which means it is allowed.
As for appearance, the main thing is that the frame:
- did not distort the numbers and letters of the number;
- did not crawl on them;
- did not reduce the edging (it should be 3 mm);
- did not reduce the size of the flag;
- made it possible to identify the region code.
To learn how to properly install a protective frame for a license plate, watch this video:
If there is no frame
Car owners who are not satisfied with the frames attach the numbers to the bumper with screws or rivets.
In the first case, to remove the sign it is enough to use a screwdriver. If the screw has become stuck and will not come off, it is better to immediately treat it with WD-40, wait 5 minutes and try again.
Rivets and self-tapping screws with licked heads are carefully drilled out. It is not recommended to use a grinder, as there is a high probability of damaging the surface of the sign during work.
Drilling is carried out while protecting your eyes with goggles.
Possible problems and nuances
Sometimes the old frame cannot be disassembled. In this case, its end is heated with a hairdryer until softened and bent, the number is removed.
When selling a car, if there is no desire to keep the existing number, it is torn off without unnecessary ceremony. The main thing is that the symbols printed on it are visible.
Issues relating to motorists' rights are often more important than they appear at first glance. A driver may lose his license or suffer other severe penalties due to ignorance or misinterpretation of laws and regulations. Do not be lazy to dive deeply into the essence of the issue being studied, do not hesitate to ask advice from professionals.
Source
How to remove the number frame?
A license plate confirming state registration is an important attribute of any car. Appearing on the roads without license plates is fraught with serious consequences for the car owner (from a large fine to deprivation of rights for 3 months). Therefore, he must take care to prevent such unpleasant situations.
Today, for attaching license plates, license plates are used, special structures made of metal or high-strength plastic that do not lose their mechanical properties over a wide temperature range.
Why do you need a dealer license plate frame?
Look at your license plate? Is everything okay with him? Look carefully at the license plate frame. Don't notice anything? Unfortunately, on most cars that drive on Russian roads today, on the license plate frame there is an advertisement for the dealer where the new car was purchased. You are not annoyed that someone else's advertising is free on your machine. For example, the inscription on the frame Musa Motors or the like?
Functions of number frames
The functionality of the number frames is as follows:
In addition, car dealers use license plate frames as advertising platforms for their own services; for this purpose, they make custom car frames with their own logos and contact information. That is why the production of frames for license plates and installation on cars is in increasing demand.
How to open the number frame?
A manufacturer that produces car accessories usually adheres to certain standards, because license plate frames must take into account the standard dimensions of the license plates themselves and match the design of the car body (bumper). However, with regard to design features, the flight of design imagination is less limited. Therefore, the method of fixing the sign on license plate frames from different manufacturers may differ significantly. The main obstacle to opening the number frame is a lack of understanding of its design and the location of the locking latches.
Of course, if the frame was installed by the car owner himself, he can remember the assembly sequence and try to open it in the reverse order, following the instructions. The easiest way to remove the frame is when the car frame is damaged and requires replacement with a new one. Considering that the retail price of a new accessory is from 120 to 200 rubles, the thought of repairing it is unlikely to occur to anyone. In this case, you can remove the license plate by simply breaking the structure completely.
To open the number frame carefully and without damage, you need to carefully familiarize yourself with its design, installation instructions (manufacturers usually post them on their websites), arm yourself with a thin knife that will allow you to determine the location of the latches and a slotted screwdriver that will help unfasten the latches. Be patient, and, of course, rely on your own intuition.
And it is quite likely that everything will work out. If you have frames manufactured by AEP, installation instructions can be found on the manufacturer's website.
Source
What material to choose a sign frame from?
The chrome frame for the number is suitable for the central or northern region, where temperature changes prevail. Unlike plastic, chrome can withstand temperatures from -40 to +80 degrees. At the same time, the frame for a car license plate made of stainless steel is shock-resistant and almost scratch-resistant, and lasts 4 times longer than its plastic counterparts.
In turn, plastic frames are cheaper, this is especially true if you are purchasing this accessory for a car that is reaching its end of life. In addition, plastic is distinguished by its lightness and ease of installation, but it is still a rather rigid material.
But silicone frames for numbers are distinguished by their flexibility; they are a metal base covered with silicone. In this case, such an element can be bent so that it fits as tightly as possible to the bumper.
If we talk about the price of the issue, then a license plate frame (stainless steel) will cost about 600 rubles, and a plastic one from 50 rubles.
When choosing a number frame, it is important to take into account not only the material of the product, but also the fixation mechanism, of which there are several.
How to install or replace license plate, parts and mounting locations
The rules allow the number plates to be installed in a frame, unless the registration plate is additionally covered with plexiglass. The frames are attached to the bumper with self-tapping screws and have several types of latches for fixing the plate with the number.
Each vehicle that is permitted to operate on the roads has an individual registration plate. The license plate is issued by the traffic police department and is a steel plate with embossed numbers and letters. The car owner is obliged to install it on the car in accordance with the rules. You can attach license plates to a new car with a frame yourself, after first checking the technical regulations.
How to attach license plates to a car
Today, without exception, all cars operated on the territory of the Russian Federation must be equipped with a unique state number. At the same time, upon resale, it can be dealt with in different ways.
It is worth thinking about this issue in advance in case of re-registration of a vehicle. Installing a license plate is a procedure that is carried out by the car owner relatively infrequently.
Usually this happens when replacing old registration plates with new ones or when purchasing a new vehicle. This is why many simply do not pay enough attention to all the technical features of this type of procedure and completely in vain.
Since violation of the rules for attaching license plates, their locations threaten quite serious problems with the law. First of all, you should remember the fairly large amount of the fine for driving a vehicle without a valid license plate assigned to it. For 2021, the amount of such a fine is as much as 5 thousand rubles. In the Traffic Rules, these types of issues are discussed in sufficient detail. At the moment, serious violations include the following:
- the use of registration plates together with any technical means that prevent the recognition of information on them.
- lack of registration plates;
In addition to a fine, the owner of such a vehicle may be subject to another administrative penalty - deprivation of the right to drive a vehicle.
Legal requirements
According to Art. 12.2 of the Code of Administrative Offenses of the Russian Federation, driving a car without license plates is punishable by a fine of 500 rubles; a repeated violation threatens to deprive the driver of the right to drive a vehicle for up to 3 months. A similar punishment will follow for the fact that the sign is not installed in accordance with the regulations.
Removing license plates from a car
On American SUVs, the regular “registration” space does not meet the standard of Russian license plates. In this case, you can put the numbers in a frame on the car and fix it on the roof. It is important to remember that the distance from the ground to the top of the number panel should not exceed 2 meters.
When choosing a car with a non-standard bumper, drivers notice that the standard mounting points for the license plate do not match the holes in the license plate. Considering that the license plate must be clearly readable, without damaging the information part, the option of opening the frame for the license plate, installing it on the bumper and fixing it in accordance with the regulations remains the best.
How to install a license plate on a car in a frame
Contents Today, without exception, all cars operated on the territory of the Russian Federation must be equipped with a unique state number. However, upon resale, it will be possible to deal with it in different ways.
It is worth considering this issue in advance in case of re-registration of the vehicle.
Installing a license plate number is a procedure that is carried out relatively infrequently by the car owner.
This usually happens when replacing old registration plates with new ones or when purchasing a new vehicle. That is why many simply do not pay enough attention to all the technical features of this kind of procedure and completely in vain. Since violation of the rules for attaching license plates, their locations threaten quite serious problems with the law.
First of all, you should remember that the fine for driving a vehicle without a valid license plate number is quite large.
For 2021, the amount of such a fine is as much as 5 thousand rubles. In the Traffic Rules, these types of issues are discussed in sufficient detail.
Currently, serious violations include the following:
- lack of registration plates;
- the use of registration plates together with any technical means that prevent the recognition of information on them.
In addition to a fine, the owner of such a vehicle may be subject to another administrative penalty - deprivation of the right to drive a vehicle for a period of 1 to 3 months. That is why the answer to the question about the location of the signs is clear.
Stages of installing and replacing a number
The rules allow the number plates to be installed in a frame, unless the registration plate is additionally covered with plexiglass. The frames are attached to the bumper with self-tapping screws and have several types of latches for fixing the plate with the number:
Only the owner can open the license plate on the car - all products have anti-vandal clips and fasteners.
Installation locations
Frames are installed in places specified by regulations. Metal frames are attached to the body with screws. To prevent corrosion at the points of contact between the screws and the metal, the screws and part of the bumper are treated with an anti-corrosion compound before installation. The best remedy, according to drivers' reviews, is a push-salon, into which the screw is dipped before screwing in.
To insert a car number into the frame, you will need a slotted screwdriver, which is convenient for moving the metal plate. For greater reliability, drivers attach the license plate to the panel with 2-3 self-tapping screws and only then use structural fasteners.
Place for mounting
In the book frame or Euro frame there is a folding panel that fixes the license plate around the perimeter. Polypropylene latches at the corners hold the panel securely. It is quite easy to remove the car number plate from the book frame, so additional screws are required.
The panel form has no moving parts. The design uses anti-vandal latches that hold the number. There is also additional fixation of the sign with two screws in the corners.
How to open/close number frame
While inserting a license plate into a frame on your car can take a few minutes, opening the panel can be difficult. The manufacturer uses anti-vandal latches, which break if opened incorrectly - it is impossible to steal the sign.
To open the panel in the book frame, you need to insert a thin screwdriver between the license plate and the panel strictly in the center of the folding part. Carefully unfasten the side “crocodiles” - the “book” will open.
Euro frames have small recesses on the side for a key with a plate. The original key is inserted into the slots and moves the internal lock. If you don't have a wrench at hand, you can use two slotted screwdrivers of the smallest size. They are inserted on both sides at the same time, they are also pressed at the same time - the side clamps move away, the number can be immediately removed.
Fine for incorrect license plates
Punishment for a registration plate that does not comply with the requirements of the law is imposed under Article 12.2 of the Code of Administrative Offences. But it consists of several sections. And the driver does not always correctly assess the degree of his guilt for a violation in this area, therefore he deliberately ignores the requirements for the sign. The punishment for it is in the form of:
- A fine of 500 rubles. for a dirty room, if this prevents you from examining its individual elements or its entirety. Often traffic police officers replace such a measure with a warning, which is also possible under Part 1 of this article. It also includes those who installed non-standard numbers, for example, with a different font, too narrow or wide edging, or other violations, unless they are provided for in other sections 12.2 of the Code of Administrative Offenses.
- A fine of 5,000 rubles. or deprivation of driver's license for 1 - 3 months. The penalty is imposed for driving a car whose license plates are not installed in the correct place, are modified, or have devices that make it difficult to identify the vehicle.
- Forced payments of 2500 rubles. (for citizens), 15,000 - 20,000 rub. (for officials), 400,000 - 500,000 rub. (for legal entities), if a car is knowingly installed with someone else’s or a fake number. A penalty is imposed if a car with a false sign has not even had time to participate in road traffic.
The strictest measure is taken for those who drove a car with someone else’s or non-existent number plate. It is regulated by Section 4 of Article 12.2 of the Code:
Driving a vehicle with knowingly false state registration plates entails deprivation of the right to drive vehicles for a period of six months to one year.
How to set/remove a number
Number frames are manufactured according to standards, the size of the product exactly matches the size of the license plate (tolerance - plus 5 mm around the perimeter). Drivers have no difficulties with installation.
In this case, the frames turn out to be very convenient: the sign can be installed in 1 minute, secured with standard fasteners. And then, if necessary, screw it to the body with screws. To remove the license plate frame from the car, you only need a set of screwdrivers.
see also
- If the car is parked without license plates
- Why are license plates removed from a car under the new rules?
- How to check by VIN number whether a car is damaged or not
- Unreadable license plates on the car are a rule
- How to keep your car number plates according to the new rules
How to find out if a car is stolen or not by license plate number- Why can license plates be removed from a car?
- I lost my car license plates, what should I do?
Law on cars with foreign license plates- How to find out by car vin number
- How to find out the VIN number by car number
Fastening parts
The main fastening elements are galvanized screws for attaching the car number plate to the frame. Plastic fasteners remain additional fasteners, although they are considered quite durable and can withstand high mechanical pressure.
But since the screws provide end-to-end fixation of the metal plate and the metal number, the fastener is considered more reliable. Self-tapping screws are included, the standard length is up to 2 cm. They are screwed into the car body, bumper, trunk lid.
Source
