The fuel filter in any car is a consumable item. As it is used, its timely replacement is necessary. From this article you will learn how to replace the fuel filter on a Daewoo Nexia with your own hands. First of all, we can congratulate you, you have found the most complete and detailed instructions for replacing the fuel filter with photographs and videos.
Fuel filter on Nexia
It is recommended to replace the fuel filter no later than 40 thousand kilometers, as the manufacturer recommends. The ideal figure for replacement would be 10 thousand kilometers, this is due to the poor quality of gasoline.
The instructions are universal for all Nexias and are suitable for cars before 2008, as well as restyling after 2008 (N150), 8 valves and 16 valves.
Often, to determine whether it is time to change the fuel filter or not, it is enough to identify the symptoms. For example, at high engine speeds there will be jerks when moving, the engine will seem to twitch and not respond to gas. This often indicates a clogged fuel filter or lack of gasoline. There is no need to wait for these symptoms to appear; it is better to change consumables on time.
Article number and approximate cost of a branded fuel filter and its analogues
The Daewoo Nexia has a fine fuel filter. It is the same regardless of whether the car engine has 8 valves or 16 valves. The original consumable has one of the following catalog numbers:
- 96130396;
- 25055129;
The cost of a native fine filter ranges from 500 to 750 rubles. Analogs of the branded filter are also available for sale. The best alternatives are shown in the table below.
Table - Analogues of the fine fuel filter for the Daewoo Nexia car
Company manufacturer | Article number | Estimated cost, ruble |
Profit | 15302903 | 165-200 |
Bosch | 0986450119 | 365-410 |
Parts-Mall | PCC002 | 210-270 |
Mann-Filter | WK6122 | 550-630 |
TRW | F185 | 1600-2700 |
In addition to the fine filter, the Daewoo Nexia has a mesh that catches large debris. On cars manufactured before 2002, the filter mesh used has article number 96183953.
A branded coarse filter costs from 160 to 220 rubles. It is also possible to buy analogues from other brands. The table shows the best nets for cars produced before 2002.
Table - Alternatives to native mesh 96183953
Brand | Article number | Approximate cost, ruble |
Krauf | KR1048F | 155-200 |
Market (OEM) | 96183953 | 90-120 |
Conner | KFPX19 | 110-170 |
Grog | PZNX1078 | 44-60 |
Daewoo Nexia cars manufactured after 2002 use a mesh filter with catalog number 96350078-2. The cost of a branded mesh ranges from 30 to 80 rubles. The best analogues of filter mesh can be found in the table below.
Table - Analogs of mesh filter 96350078-2
Company manufacturer | Catalog number | Estimated cost, ruble |
Krauf | KR1128F | 55-70 |
Amd | FP164 | 50-70 |
In some cases, instead of replacing the filter mesh, it is more profitable to install a new fuel pump assembly. For Daewoo Nexia cars produced before 2002, a unit with article number 96350078 is required.
The price for consumables varies from 1000 to 1800 rubles. There is also an opportunity to purchase an analogue online. The best alternatives are presented in the table below.
Table - Analogues of the Daewoo Nexia branded fuel cup until 2002
List of companies | Article number | Approximate price, ruble |
Profit | 40010035 | 1350-1700 |
ERA | 775242A | 1650-2200 |
Onnuri | 96494976 | 1550-1950 |
Parts-Mall | PDCM001 | 1750-2500 |
Japan Cars | O20010JC | 950-1400 |
On Daewoo Nexia cars produced after 2002, the fuel filter is 96494976. Its cost varies from 2,700 to 3,000 rubles. The best analogues of the native node are given below.
Table - Analogs of the original fuel module for Daewoo Nexia after 2002
Manufacturer | Filter article number | Approximate price, ruble |
Onnuri | 96494976 | 2000-2500 |
ERA | 775242A | 1650-2000 |
Profit | 40010035 | 1400-1600 |
Parts-Mall | PDCM001 | 1800-2300 |
Asam | 50070 | 1050-1400 |
Mesh
Delivery time
Delivery time is agreed upon with the forwarder, who will contact you shortly after you place your order.
Attention!
An incorrect telephone number, inaccurate or incomplete address may result in additional delays! Please carefully check your personal information when registering and placing an order. The confidentiality of your registration data is guaranteed.
Delivery is carried out daily from 10:00 to 19:00, on Saturday delivery can also be made, but by prior arrangement. There is no delivery on Sunday. Items you order on Saturday and Sunday are delivered on Monday or Tuesday.
Fuel filter location
The fine fuel filter is located on the Daewoo Nexia under the bottom of the car. It is located on the right side.
Location of the fine fuel filter
The coarse mesh is assembled with the fuel pump. The pump is placed directly into the gas tank.
Location of the coarse mesh
How to relieve pressure in the fuel line
- Open the fuse box cover . This refers to the fuse box, which is located in the passenger compartment. The lid is held on by latches. First you need to pull the top edge of the cover towards you, then the cover can be removed completely.
- Remove the fuel pump relay . The exact location of the fuel relay is marked in the photo below.
- We start the car . The engine will stall in 2-3 seconds.
- That's it, we can assume that the pressure in the fuel line pipelines has been relieved.
Replacing the fine fuel filter
Replacing the fine filter is shown below.
- Relieve pressure in the fuel circuit.
- Clean the fuel filter from external dirt.
Work area to be cleaned
- Unscrew the pipes.
Disconnecting the fuel line
- Loosen the clamp.
Unscrewing the pinch bolt
- Remove the filter.
Pulling out the filter
- Replace the O-rings.
O-rings
- Install a new filter.
New consumables
Installation
- Check for leaks.
Replacement instructions
It is more convenient to perform the procedure on an inspection hole, overpass or lift. If this is not possible, then you should raise the right rear part of the car using a jack.
Tools
To carry out the procedure you need to prepare:
- keys to “13”, “16” and “21”;
- wooden choppers;
- rubber sealing rings for lines;
- container for gasoline;
- new fuel filter;
Original fuel filter
- clean rags.
Chopiks are wooden sticks, pointed to a cone at the end. They are used to plug fuel lines.
- First, disconnect the ground wire from the battery terminal.
- The pressure in the fuel system should also be relieved.
- The fuel filter must be cleaned of contaminants.
- Next, use a wrench set to “16” to loosen the fittings from the fuel lines, while the fitting on the filter can be held using a wrench set to “21”.
Loosen the fittings
Retaining bolt on the clamp Remove the old element.
Disconnected lines When installing a new product, you must pay attention that the inscription “IN” printed on it is located on the side where the fuel supply pipe will be connected. If there is no such inscription, then there should be an arrow indicating the direction of movement of fuel in the system.
Fuel flow direction
Connecting the battery
Timely replacement of the fuel filter on Daewoo Nexia will extend the life of the vehicle and contribute to stable engine operation.
Useful tips
When installing a new fuel filter, make sure that the inscription “IN” on the end of the filter is located on the side from which the fuel supply pipe approaches the fuel filter. If the new fuel filter does not have this inscription, then there must be an arrow on its body that will indicate the direction of fuel flow.
When installing a new filter, first put the nuts on the tips of the fuel line tubes, put on the clamp and tighten the nut on it, and then proceed to finally tighten the nuts on the tips.
For better sealing and sealing, rubber rings are located between the fuel filter and the main pipes. Inspect them when removing them; there should be no abrasions, cuts or other signs of wear; if any defects are found, the seals should be replaced.
When the fuel filter is installed on your car, you should check the system for leaks with the engine running. Inspect all connections of the fuel lines to the filter to promptly detect gasoline leaks. If necessary, it is worth tightening the nuts connecting the tubes to the fuel filter housing, and also replacing the O-rings on the tips of the tubes.