Hyundai Solaris alternator belt replacement » Drive

Part selection by article number

When choosing a part, you should always focus only on original models. Drive belts for vehicles with and without air conditioning will vary in price by a factor of two or more.

The minimum cost of a model that matches the article number will be 650 rubles, but purchasing a non-original version will lead to its rapid wear. Take care in advance to purchase rollers that match the article number.

The drive belt of auxiliary units (aggregate) for the Korean model, according to the requirements of technical documentation and regulations, must be replaced every 35 thousand kilometers; in practice, the replacement operation has to be done more often.

Signs of a faulty tensioner

Since the element plays an extremely important role in the functioning of the vehicle, every owner should know the symptoms indicating damage to the tensioner:

the presence of corrosion and cracks on the element;

pulley bearing wear;

damage to the pulley itself;
incorrect installation of the tensioner belt;
creaking and crackling in parts;
When operating, the lever moves in different directions and a knock is felt.

Important information! If such signs are detected, experts recommend contacting technical service as soon as possible.

How to replace the Hyundai Solaris unit belt?

The auxiliary drive element is replaced when the first signs appear:

peeling of fabric or rubber;
cracks;
tears;
oil leaks, which indicates leaks from the engine;
other mechanical damage.

A small strap that breaks on the road due to the driver’s oversight in the absence of a spare part and the inability to carry out repairs with your own hands will lead to the need to evacuate the car for service.

To make the replacement yourself, you need to:

open the hood;
using a mounting spatula or screwdriver, press out the drive roller bracket;
remove the part from the rollers;
Check the functionality of the tension roller by turning it several times. If resistance is felt and the roller rotates very slowly, it will have to be replaced. An adjustable wrench with a 17mm head is suitable for this;
Reinstall the removed elements. The internal grooves of the pulleys must remain free during installation;
turn the crankshaft three turns and achieve the correct position of the part relative to the drive of auxiliary units on the pulleys;
At the final stage, check whether the protrusion in the roller body coincides with the recess.

The driver has a question about how to tighten the belt on a Hyundai Solaris if it has become loose. This is not difficult to do. To do this, you will need to follow the steps described above, replace the roller without changing the strap with a new one, and tighten it.

How to replace the alternator belt on a Hyundai Solaris?

This part of the automobile mechanism must be monitored and changed every 25-30 thousand kilometers. This period is reduced when the machine is actively used.

Signs of immediate replacement completely coincide with similar malfunctions for a similar part of the auxiliary units. Sometimes it is enough to tighten the alternator belt on a Hyundai Solaris by replacing the rollers, but when the time comes, replacement is necessary.

If you only need to replace the bearing, you can install a domestic one, article number 203. The tension is regulated by an auxiliary automatic crankshaft mechanism, which, after replacing the roller, must be manually turned three times to adjust the tension of the system.

To replace, you need a regular set of tools and the spare part itself. The original model has article number 2523145002, length is 2177 mm.

These simple DIY repair operations for Hyundai Solaris are available to most car owners who have knowledge about the structure of the vehicle.

Performing this operation in a timely manner and independently not only improves road safety, but also saves the driver money, protecting him from more complex types of repairs associated with power plant malfunctions.

267 1 267k

The drive belt, also known as the belt of auxiliary units on the Hyundai Solaris, in addition to ensuring the uninterrupted operation of the generator, is responsible for ensuring the functioning of several other car systems. Such systems include: air conditioning system, coolant supply system, power steering system. As part of routine maintenance, the drive belt for auxiliary units was replaced on a 2012 Hyundai Solaris with a 1.6 gasoline engine.

When to change the drive belt and tensioner pulley on Solaris

Like every part in a car, the alternator belt is subject to wear and therefore needs timely replacement. Therefore, the manufacturer recommends checking the auxiliary drive belt in accordance with routine maintenance 2. This happens every 30,000 km . And change it as it wears out or cracks, tears, peeling of the fabric base and other defects appear on it. However, it should be remembered that the belt performance tests were carried out in factory conditions. Therefore, when operating a car in difficult conditions, the need to check or replace the belt may occur much earlier than expected.

To check the technical condition of the belt, you must first engage fifth gear in the manual transmission, hang up the front wheels, rotate and inspect the belt along its entire length.

On a car with an automatic transmission, for such an inspection it is necessary to remove the engine protection cover on the right side of the engine compartment and rotate the crankshaft using a wrench using the pulley bolt.

As a universal method, you can put marks on the belt using chalk or a marker, and gradually turn the crankshaft at small angles with the starter to visually inspect the belt.

The peculiarity of the bypass strap tensioning system is also its main problem. Very often, simultaneously with the loss of performance of the drive belt, the tension roller fails. A distinctive sign of a broken tensioner roller is a whistle produced during operation. The whistle is more often noticed in damp and cold seasons, but if the roller is working on the edge, then the whistle can be heard constantly.

The manufacturer gives a warranty on a new roller for a car from the factory for five years or 150,000 km . However, it is necessary to begin the process of replacing the roller at the first sign of squealing and/or wear on the ridge belt.

Tools and materials required to replace the drive belt

For repair you will need:

inspection hole or overpass;
ratchet with extension;
head at “17”;
keys for “17”, “14” and “12”;
tension roller;
vice;
the belt is new.

How to install the drive belt for the generator and accessories

For a complete replacement on a Hyundai Solaris, the following belt is suitable:

Vendor code:	Trademark:	Manufacturer country:	Width, m	Height, m	Length, m	Weight, kg
6PK2137 252122B000	Hyundai/Kia	South Korea	0.2	0.025	0.23	0.245

Replacement belts: original poly V-belt from the company 252122B000. Price 1400 rubles. List of belt replacements from the manufacturer depending on the price category: Bosch 1987947958 – 700 rubles; Gates 6PK2138 – 850 rub.; Dayco 6PK2135 – 600 rub.

Rollers and tensioner for replacement: the original tension roller (with tensioner) from the manufacturer Hyundai/Kia has article number 252812B010, the cost of the product is 3800 rubles, and in OD it is all 6 thousand. But you can also use more affordable analogues: tension roller Sat ST252812B010 - 1700 rubles .; belt tensioner, V-toothed Fenox R54102 – 2100 rubles; tension roller Optimal 0N2202S – 700 RUR; Torque KR5074 – 500 rub.

Similar rollers are installed on Kia Rio, Spectra, Soul and Cerato cars.

Unscrew the fastening bolts on the right engine mudguard and remove the shield. Then, using a “12” wrench, completely unscrew the upper bolt on the generator, and using a “14” wrench, loosen the bottom bolt, this is necessary so that the generator will move forward and the belt will loosen a little.

If after this the belt does not loosen, then it is necessary to loosen the tension roller bolt with a key, thereby tensioning the roller spring, then the belt will sag and we can remove it.

Remove the old belt.

After removing the belt, turn the tension roller; it should turn without effort and not jam, otherwise the tensioner needs to be replaced. Using a “17” socket, unscrew the bolt securing the tensioner device using a special extension for the head, then remove it and remove the device.

Using the “14” head, unscrew the thread on the roller clockwise.

Replacing the alternator belt on a Hyundai Solaris, if you follow the manufacturer's recommendations, is done every 30 thousand km. The interval may vary depending on the condition of the belt. Everyone makes their own decision about how many kilometers to replace the belt. Most car owners believe that the belt can function properly about twice as long as the indicated period, and change it after a mileage of 50-60 thousand km.

conclusions

Thus, you can quickly check and replace the alternator belt yourself. Good luck to everyone and good travels!

The following two tabs change content below.

I've been driving Solaris for four years now. Happy as an elephant. As soon as I pay off the loan for him, I’ll get myself a new Korean!

Tags: Hyundai Solaris

Belt marking 6РК 2137 (six-strand, length 2137 mm).

Turn the tension roller. The roller should turn easily, without jamming. If the roller jams or rotates with great force, the tensioner must be replaced.

To do this, use the “17” head to unscrew the bolt securing the tensioner.

Remove the bolt and tensioner.

Automatic tensioner assembly.

Install the tensioner and auxiliary drive belt in reverse order.

When installing the tensioner, the protrusion on the housing must fit into the corresponding recess on the cylinder block.

Error in the text? Select it with your mouse! And press: Ctrl + Enter

1,050 rub.
700 rub.

Are available
Weight: 0 kg.

Drive belt with air conditioning (DAYCO) for Hyundai Solaris 2010-2017 is suitable for Hyundai Solaris 2010, 2011, 2012, 2013, 2014, 2015, 2021, 2021, before restyling and restyling Solaris 1; Article 6PK2135, good replacement for the original spare part

How to change the alternator belt on Solaris

The alternator belt can be replaced either independently or at a service center. The first option requires more time, but less material costs. The cost of replacing a belt depends on the service, but on average it is estimated at about 500 rubles. An official dealer will most likely charge a little more for this procedure. If you decide to change the belt yourself, it is recommended to study the video on this topic.

Do-it-yourself Solaris alternator belt replacement

Replacing the alternator belt yourself is not very difficult for a beginner. The main thing in this matter is consistency and accuracy. To replace the alternator belt yourself, you need to follow these steps.

Unscrew the fasteners and remove the right engine mudguard.
Using a screwdriver, press the tension roller bracket to release the belt tension.
Remove the belt from the pulleys.
Unscrew the bolt securing the tension roller and remove it.
Install a new tension pulley and belt.
Reassemble the removed parts in reverse order.

Changing the tension roller is not necessary, but is recommended. If you have examined the video and come to the conclusion that it is in perfect condition, you can skip this point.

Replacing the belt on cars with an engine power of 1.4 and 1.6 liters is carried out according to the same scheme.

How to choose an alternator belt for a Hyundai Solaris?

The Solaris has a belt with a length of 2137 mm . Its marking is 6 RK 2137 .

The cost of the belt (catalog number 2523145002 ) is about 500 rubles. You can buy analogues for about half the price. The choice of belt depends on personal preference. Tips on this topic can be found on specialized forums. The manufacturer, of course, recommends installing only original spare parts on the car.

Replacing the Hyundai Solaris belt or drive belt may be required in various cases. For example, when you need to remove other units or gain access to engine components. Removing and installing the Hyundai Solaris accessory drive belt is not a very complicated process, but it does require some knowledge. According to the manufacturer's regulations, the alternator belt tension must be checked once every 30 thousand kilometers. We offer detailed instructions with photographs.

Let us immediately note that a belt that has cracks, tears, or peeling of rubber from the fabric base must be replaced. The original marking of the Hyundai Solaris alternator belt is 6РК 2137. This is a wide six-ribbed belt with a length of 2137 mm. The belt is tensioned automatically using a special device with a tension roller. If there is a malfunction, this tensioner may cause the belt to jump off. Therefore, when inspecting the belt, pay attention to the Hyundai Solaris tensioner.

To remove and replace the belt, you need to remove the right wheel and the engine compartment mudguard. To loosen and remove the belt, simply press the tension roller bracket with a powerful screwdriver. Look at the photo below.

To remove the tension mechanism of the Hyundai Solaris, you need to unscrew the bolt with a 17mm head.

To check the automatic drive belt tensioner, you need to check the roller. If the roller rotates with jamming and makes excessive noise during operation, and also rotates with great effort, then the tensioner will have to be replaced.

When installing a new tensioner, be sure to pay attention to the protrusion (indicated by an arrow in the photo), this protrusion should fit into a special recess in the Hyundai Solaris cylinder block.

In practice, the belt on a Hyundai Solaris can last quite a long time. A fairly simple and reliable design usually does not cause problems either in operation or repair.

The proper operation of the Hyundai Solaris depends on many factors that must be in good condition. Electricity, chassis, engine. All this must be maintained in excellent condition, otherwise, one fine day, the car may simply end up in the middle of the road, which will force the car owner to spend money on a tow truck. Therefore, it is so necessary to monitor the most important elements of the vehicle’s operation.

One of these elements is the alternator belt. Hyundai Solaris is a fairly reliable car, but no one can say that it is not subject to wear and tear. In addition to this element, this system has both a bypass and a tension roller. All this must be inspected for various damages, because by changing just one belt, you can throw money down the drain by forgetting about the rollers.

The regulations that exist on every car recommend inspecting this system on Solaris every 30 thousand kilometers, and maintenance should take place at specialized points if the car is under warranty. But it is worth noting that if the warranty period has passed, then the work can be done independently, or you can go to an inexpensive car service.

But you need to inspect the belt more often, about 4 times during its intended service life. The manufacturer issues guarantees only on the basis of the “average room temperature” and based on its own research. But no one knows what driving style the driver professes, and what loads the tension belt or idler pulley of the Hyundai Solaris are subjected to.

If any strange sounds come from this structure or various cracks can be noticed, then the driver has a direct route to a specialized store. Buying a belt should not be delayed until it breaks. Also, if the belt is changed, you need to look at the condition of the rollers. Sometimes one thing breaks because of another, and replacing a small part of that system may not help.

High-quality replacement of the Solaris generator - replacement by the hands of professionals

The main steps for replacing a generator are as follows:

the master unscrews the upper and lower fastenings of the generator, using sockets and ratchets for convenience;
lifts the generator up, releases the tension, removes the belt from the pulley;
physically replaces the generator by first disconnecting the contact board at the back;
then completes the assembly and tensioning process according to the instructions described above.

I have the following tensioners for the alternator and power steering from the Nissan Sleigh N14 factory

I ordered the 6PK2060 belt, will it fit? Is the tensioner travel enough?

6PK-2070 installed optimally

I took the generator tensioner from a Volkswagen, cut it a little, drilled one hole for a short bolt, took the belt 6pk 2080, I think 2075 will be a little short and everything works

Belt 6pk2080 became perfect)

All this is crap, when you turn on the air conditioner, the steering wheel whistles all the way like a nightingale, I came up with a bypass pulley instead of a tension pulley, I’ll try it soon.

Solarium 11 years old, 1.4 with air conditioning. Sedna assembled according to the instructions. The belt is 75, not 80. Everything fits like a charm and works like a clock. Thanks for the advice.

What can you tell us about ACCORA oil for Hyundai Solaris, thank you

Thanks a lot! We are not the only ones with crooked designers. I would like to catch the Korean who designed the gas filter with the Solaris pump... In the north, the simpler the solution, the more efficient and practical it is.

Design

The design of this system on the Hyundai Solaris is not very complicated, which is why a variety of car services, and sometimes car enthusiasts themselves, take on such problems. But it is important to understand that if you do not have certain experience or at least some knowledge, then you can harm yourself by losing money and time.

The peculiarity of the drive belt on Solaris is that it ensures the operation of several systems in the engine at once. The kinematic system is responsible for a number of important mechanisms, among them:

Cooling system pump;
Air conditioner drive pulley;
Electric machine pulley;
Power steering system pulley;
Crankshaft pulley in a power plant.

Having looked at all this, it is difficult to somehow underestimate the importance of this system in the operation of the Hyundai Solaris. Generally speaking, the operation of the drive belt can be described in a few words. Its purpose is to operate the engine and generator cooling system. It is because of the engine that the vigilant driver so often pays attention to the operation of the drive belt and various rollers, which include the bypass one.

Automatic tensioner: 1– tension roller 2– roller bracket 3– housing

Why does the belt whistle, rustle, and squeak?

In most cases, the belt squealing is due to the tensioner, not the roller bearing or the belt itself. Dirt and dust from our roads gets inside the part and leads to wear.

The central hole has a groove

The tensioner housing halves move apart

Pay attention to the mark left by the belt. You can see from the development on the video that the right edge is darker than the central part. The planes of operation of the roller and belt do not coincide. This occurs due to wear on the tensioner itself. This is how a whistle and squeak appears from the belt. It can either appear or disappear. But over time it will become permanent.

Is it dangerous? If you drive for a long time with a whistle, the following will happen: the belt begins to move more and more along the roller, part of it simply slides off the edge. Eventually it will fly off or be torn. It happens this way and that. IF YOUR BELT HAS FELL OFF, YOU CANNOT CONTINUE DRIVING! The pump is driven by a belt; without it, the engine will quickly overheat.

We tell you more about wear and tear in our video.

Replacement

As experts note, the process of removing rollers and belt on Solaris is not that complicated. Almost anyone can cope with this task, even if they have no experience. However, you should understand that this is an absolutely irresponsible decision if the car is under warranty. Replacing the drive roller is not that difficult, but it will affect the warranty.

First, loosen the tensioner roller. To do this, unscrew the fastener counterclockwise. After this, the belt can be easily removed, following the movement contour. There shouldn't be any problems at this stage. Experts also say that the removed parts need to be analyzed and clearly determined whether it is time to change them or can be left for now. This helps to choose a replacement interval that will be relevant to the driver, and will not just be written down in the Hyundai Solaris book.

It is also worth understanding that you can make an error during installation or poor quality of parts, all of which can lead to a shift in the replacement interval. And also to unexpected breakdowns. Therefore, you need to look at the condition of the tension belt and check the idler pulley. Significant damage may include:

Cracks in the rubber, defects on the inside of the belt;
Bulges on the surface, delamination on the outside;
Defects on any side;
Foreign liquids on the belt.

When installing the drive belt, the specialist pays attention to laying the belt along all the guides. This is fundamental to the installation. The belt should not warp, everything should be straight even after several engine starts. However, it is worth understanding that this part assumes the correct position only when the engine idles a couple of times. All this is true both for Solaris and for any other machine.

Finally, you need to work on the tension of the drive belt. It is also important to understand that it is best to replace the tension roller and change the idler roller. This will help the new part last a long time. To determine whether the new belt is properly tensioned, a special device is used.

In order to avoid making most mistakes, during such repairs, the car enthusiast can be helped by videos, of which there are quite a lot on the Internet, especially for the Hyundai Solaris. It's one thing to read everything, another to see it. When the work is completed, the belt does not make noise, but works quite quietly. If everything is done correctly, the result will please the driver. If you still make mistakes, then you should contact a car service, because problems with the engine may not be far off.

Our advantages when replacing the Solaris tension roller

There are quite a few service centers in the country. Some carry out high-quality repairs, but they take a long time and are expensive. In others it is fast and cheap, but the quality leaves much to be desired. We offer you high-quality repairs at an affordable price and fast turnaround time.

Contact our service because:

We have qualified and experienced specialists;
the premises are equipped with the most modern equipment, which improves the quality of repairs;
We provide quality guarantees for all our services;
we eliminate any malfunctions quickly and on time;
fair pricing that satisfies our customers.

Car breakdown is a serious problem for all drivers. To prevent it from taking you by surprise, we recommend adhering to the following rules:

send the vehicle for technical inspection; the procedure can be carried out at our service center;
use only high-quality materials;
carry out car repair procedures in our car service center;
quickly respond to emerging faults;
drive the car more calmly.

Your safety depends on the proper functioning of your vehicle. The more attentive you are to it, the longer the car will last, and you will be safe while moving.

Details about the deflection roller

A part such as a deflection roller is changed quite often on any car, including solaris. When we say “frequently,” we mean the same frequency as when replacing major components. It is also important to understand that if replacement is not required, then it is better not to do it.

It is enough to look at the deflection roller to see its wear, if any. It can often be seen where the belt fits, which is not surprising. In principle, there is nothing particularly terrible about this, because the video works, spins and all that. But how do you know if this will affect the new belt? Will it break before 30,000? It’s better not to risk it, but to replace it.

Also, experts often notice that the bearing on the idler roller gives play, which is sometimes not critical, but it still exists. It is impossible to change the bearing on Solaris if the roller is plastic. But there are also metal ones; they do not suffer from wear-out and replacement problems.

As you can see, replacing the drive belt is a fairly simple procedure. Almost everyone can really handle it. But sometimes it will be better not to do something yourself. Sometimes you need to turn to professionals so that replacing one part does not result in the repair of several others.

replacing the drive belt roller Hyundai Solaris

Tools and materials needed to replace the drive belt For repairs you will need:

Replacing the Hyundai Solaris belt or drive belt may be required in various cases. For example, when you...

The belt is tensioned automatically using a special device with a tension roller. The manufacturer gives a guarantee for a new roller for a car from the factory for five years or kilometers. As part of routine maintenance, the drive belt for auxiliary units was replaced on a Hyundai Solaris of the year of manufacture with a 1.6 petrol engine.

The whistle is more often noticed in damp and cold seasons, but if the roller is working on the edge, then the whistle can be heard constantly. In this case, the roller itself does not need to be changed, but only the bearing is replaced. The bolt that secures the pulley to the tensioner body has a left-hand thread.

The bolt that secures the pulley to the tensioner body has a left-hand thread. When installing the tensioner, it is necessary to get the tide on its bracket into the slot in the cylinder block.

Replacing the tension roller of the attachment belt on a Hyundai Solaris (Kia Rio) Economy Auto

If traces of oil or antifreeze are found on the belt, it is imperative to eliminate the leak. Most often, a leak can be caused by wear of the shaft seals.

When installing a new belt, you must carefully monitor its placement in the grooves on the pulleys. The belt must be installed strictly in the center of the pulleys.

Step-by-step guide to replacing the belt on a Hyundai Solaris

The new belt is in its rightful place. After installation, it is advisable to rotate the crankshaft several times so that the belt takes its place.

A modern car needs not only gasoline to move, as it might seem at first glance, but also a large amount of electricity. There are a lot of devices in a vehicle that require constant electrical power.

Without electricity, the Hyundai Solaris will not even start, because without it the fuel in the engine will not ignite. The lighting will not work, the turn signals and windshield wipers will turn off.

Of course, there is a charge in the battery, but if the generator stops working, then this is only enough to start the engine and then until the electricity runs out. For its operation, the generator on the Hyundai Solaris uses energy from the rotation of the crankshaft, which is then converted into the electricity we are familiar with.

Design Feature

It turns out that during operation of this unit no battery energy is required, since it is constantly recharged. When to change the drive belt and tensioner pulley on a Solaris Like every part in a car, the alternator belt is subject to wear and therefore needs timely replacement.

Therefore, the manufacturer recommends checking the auxiliary drive belt in accordance with routine maintenance 2. This happens every km.

General information and site resource

Our machine uses an automatic belt tensioner. Same for engines 1.4 and 1.6. Convenient, no need to worry about checking the tension and tightening the belt. But it also has disadvantages.

Low resource for such a node. Not for all cars. Details below.
Quite a high price. A good analog costs about the same as the original. Cheap takes are wasted money.

According to repair statistics, everyone's resource is different. Moreover, there is no connection with the year of manufacture or engine size. It has been noticed that if the lower right plastic protection is missing or broken, the service life is shorter, and on machines without air conditioning, other things being equal, the service life is always longer.

Plastic right guard extends the life of the tensioner

The main problems are in the range of 60,000 - 180,000, but it should be noted that there are cars with mileages of 200,000 - 300,000.

Interesting fact: on the new Solaris 2 with a 1.6L engine, the automatic tensioner was abandoned. The belt began to be tensioned the old fashioned way by a generator.

Solaris 2 with 1.6l combustion engine, belt tensioned by generator

2272-4-17-02

And change it as it wears out or cracks, tears, peeling of the fabric base and other defects appear on it. However, it should be remembered that the belt performance tests were carried out in factory conditions.

Therefore, when operating a car in difficult conditions, the need to check or replace the belt may occur much earlier than expected.

Premature wear, the appearance of cracks or unusual noises during operation indicate critical wear. Design feature The auxiliary drive belt ensures the operation of several significant engine elements at once. The kinematic drive diagram includes two belts, which are included in the work: Thus, the value of the generator drive belt can be characterized as ensuring the operation of the engine and generator cooling system.

When operating a vehicle, the required importance should be given not only to the drive belt, but also to the technical characteristics of its installation. For a new belt, these values must correspond to the given values: Even a new drive element after 5 minutes of operation is considered as such.

replacing the drive belt roller Hyundai Solaris

Tools and materials needed to replace the drive belt For repairs you will need:

Replacing the Hyundai Solaris belt or drive belt may be required in various cases. For example, when you...

The bolt that secures the pulley to the tensioner body has a left-hand thread. When installing the tensioner, it is necessary to get the tide on its bracket into the slot in the cylinder block.

Replacing the tension roller of the attachment belt on a Hyundai Solaris (Kia Rio) Economy Auto

If traces of oil or antifreeze are found on the belt, it is imperative to eliminate the leak. Most often, a leak can be caused by wear of the shaft seals.

When installing a new belt, you must carefully monitor its placement in the grooves on the pulleys. The belt must be installed strictly in the center of the pulleys.

Step-by-step guide to replacing the belt on a Hyundai Solaris

The new belt is in its rightful place. After installation, it is advisable to rotate the crankshaft several times so that the belt takes its place.

A modern car needs not only gasoline to move, as it might seem at first glance, but also a large amount of electricity. There are a lot of devices in a vehicle that require constant electrical power.

Design Feature

Therefore, the manufacturer recommends checking the auxiliary drive belt in accordance with routine maintenance 2. This happens every km.

2272-4-17-02

Therefore, when operating a car in difficult conditions, the need to check or replace the belt may occur much earlier than expected.

Proper power supply to all electrical consumers in the car requires that the alternator belt change for the Hyundai Solaris be carried out on time. According to the maintenance regulations, such a change should be carried out every 30 thousand km.

Repeated inspection of the drive condition should focus on the need to monitor the belt surface

. Early wear, the appearance of cracks or extraneous noise during operation indicate critical wear.

The accessory drive belt ensures that several important parts of the engine operate simultaneously. The kinematic drive circuit contains two belts, which are included in the work:

cooling system water pump;
power steering pump pulley;
air conditioning compressor drive pulley;
drive pulley of the crankshaft of the power plant;
driven pulley of an electronic machine.

Thus, the importance of the generator drive belt can be characterized as ensuring the operation of the cooling system of the motor and generator. When operating a car, the required importance should be given not only to the drive belt, but also to the technical features of its installation . For a new belt, these values must correspond to the given values:

Hyundai Solaris 2012 Hyundai Solaris 1.4 Drive belt tensioner repair

In motor maintenance practice, the concept of a “re-installable belt” has been introduced. Even a new drive element is considered this way after 5 minutes of operation. For this option, the appropriate values are: to determine the deflection - 10 mm; and tension - 400 N.

The easy operation of replacing the drive belt involves a step of removal, reinstallation and tension control.

At the initial step, the tensioner roller is loosened. The fastening is unscrewed counterclockwise, and the loosened belt is simply pulled off each pulley along the movement contour. The condition of the surface should be checked in order to adjust the frequency of changes.

Despite the value indicated above, an installation error or poor quality of the belt will not only prevent it from being used for a longer time, but will also force the replacement interval to be reduced. The main disadvantages of the surface can be called:

folds, cracks in rubber, undercuts on the inside of the belt;
folds, surface unevenness, delamination on the outside;
the occurrence of defects in the end surface on any side;
the appearance of traces of third-party liquids on the surface (oil, antifreeze).

At the installation step, the main attention should be directed to the correct installation of the belt along the guide channels of each pulley. At the same time, the belt should not warp . The internal grooves of each pulley must remain free. Before tensioning, you should perform several idle rotations of the mechanism so that the belt is completely in its correct position.

Kia Rio III alternator belt whistling when cold. Causes. Remedy.

The final step involves tensioning the belt. Please note that when replacing a belt, installing a new tension roller is mandatory. A special device should be used to control tension. After achieving the indicated values, the tension roller bolt is clamped with a torque of 20-25 Nm. These actions should no longer raise the question of how to tighten the alternator belt on a Hyundai Solaris if it is found to sag during use.

If difficulties arise when performing work, a video in which all the indicated stages are shown clearly will be a good assistant when replacing the Hyundai Solaris alternator belt. And after the work is completed, you should test run the motor and make sure it operates silently. A measured rustle will be proof that no errors were made during installation.