Replacing the cabin filter of Kalina-2 with your own hands: photos and videos

Why do you need a cabin filter?

Many car owners do not attach much importance to the cabin filter, explaining this by the fact that previously cars were produced without this element. But the modern world requires a more attentive attitude to health and safety. Gas pollution, dust and other things that negatively affect the condition of the driver and passengers can lead to dire consequences. For example, the most common pollen entering the cabin can cause breathing problems or tearing. Allergic reactions manifest themselves in various ways, which pose a real threat to the person driving the vehicle. If you just take your eyes off the road for a few seconds, an accident can happen. This can be avoided by timely replacement of the cabin filter
, which retains pollen and dust and cleans the air entering the car. The price of this element is low, and replacement will not require significant effort or time from you. We have already written about why to change the cabin filter in the article “How to replace the cabin filter on a Ford Focus.”

Where is the Kalina cabin filter located and when does it need to be changed?

So, the cabin filter is an important element, as it performs more tasks than it might seem at first glance. Of course, the main function of the cabin filter is to clean the air before it is directly supplied to the car interior. In turn, this avoids air pollution in the cabin, which, if the windows are closed, is not sufficiently ventilated in a confined space.

However, that's not all. The filter also captures not only small particles (for example, dust when driving on dirt roads), but is also able to partially prevent unpleasant odors from outside from entering the cabin. If you compare driving a car without such a filter and with it, in a busy metropolis the cabin smells less of exhaust gases from other cars, etc.

Of course, clean air (free of harmful impurities and particles), as well as the absence of unpleasant odors, has a positive effect on the comfort and well-being of the driver and passengers. Thanks to such a filter, for example, Kalina with air conditioning is in no way inferior to more expensive foreign cars in terms of comfort.

It should also be noted that versions of Kalina without air conditioning have a cabin filter, which cannot be said about some budget foreign cars. In any case, if a car is equipped with such a filter, the filter element becomes dirty over time and the filter requires replacement. As practice shows, the cabin filter is often changed every 20-25 thousand km or at least once a year.

The Kalina manufacturer itself recommends replacing the cabin filter every 15 thousand km, but it is optimal to change the filter every 7-10 thousand km. mileage Experienced drivers, especially those driving cars outside the city on dusty roads (for example, dirt roads), recommend replacing them every 5 thousand km. or once every 6 months, whichever comes first.

However, if the windows begin to sweat a lot, the flow of fresh air into the cabin has deteriorated, the stove heats up, but even at full power it blows weakly, there is an unpleasant smell in the cabin, etc., then the cabin filter must be replaced regardless of how long it has served ( month, two or more).

By the way, the problem cannot be ignored, since without fresh air on a long journey the driver may feel tired and drowsy. Window fogging caused by a dirty filter also affects safety, especially in humid weather, and insufficient heating of the interior can cause health problems and a noticeable decrease in comfort.

Please note that on Kalina it is not so easy to check the condition of the filter when compared with many other cars. For example, on many foreign cars the cabin filter is located directly in the cabin; to gain access to it, it is usually enough to remove the glove box (glove compartment lid). This means that the filter can also be changed easily and quickly.

If we consider the Lada Kalina model, the cabin filter is located outside the cabin, that is, actually outside. More precisely, the cabin filter on Kalina is located on the front right, between the engine compartment and the windshield of the car. Getting there is more difficult than in many foreign cars.

In turn, given this feature, owners usually do not check the condition of the cabin filter on Kalina for contamination and assess the condition, but immediately replace such a filter with a new one. Below we will look at how to replace the cabin filter on a Lada Kalina, as well as how to change the cabin filter on a Kalina correctly.

Replacing the Kalina-2 cabin filter with your own hands: photos and videos

The cabin filter of the Lada Kalina is a small piece made of corrugated paper, the condition of which determines the cleanliness of the air in the cabin.

More precisely, the air should flow in clean in any case, but the amount of air supplied depends on the level of contamination of the filter. Let’s say that in winter the heat of the stove becomes worse.

Then, first of all, look at the filter, and only then at the condition of the heater. It is easy to understand that the cabin filter can always be replaced. And any owner can perform this operation.

Materials and equipment

The part, which we call the Lada Kalina cabin filter, is designated by the following catalog number: 11180-8122010. Look at the photos and check what is available from your suppliers.

To replace the cabin filter of Kalina-2, you will need only two screwdrivers: a Phillips (regular) screwdriver and a torx-t20 screwdriver.

We will remove the plastic frill by unscrewing 5 screws, and then remove the filter cover and change the filter.

A set of materials and tools for replacing the cabin filter of VAZ-2192/94

We will consider the sequence of replacement actions in the next chapter. In the meantime, we note that along with the filter, its protection is sometimes installed - a plastic or aluminum mesh with a mesh size of 3-5 mm. Whether such “tuning” is advisable must be decided by the owner. It is better to choose heat-resistant plastic, but in general, you must remember: making changes to the standard design entails loss of warranty.

Replacing the cabin filter of Lada Kalina
Read also: Alternator belt tensioner roller. how to replace the alternator belt tensioner pulley

When performing any manipulations when the hood is open, it is recommended to remove the negative terminal from the battery. And although we will not work with electrical equipment, it is still better not to neglect the recommendation - take and unscrew the terminal marked with a minus sign. It does not take a lot of time.

Step-by-step instruction

It is known that the cabin filter of the Lada Kalina-2 is replaced every 15,000 km. The indicated numbers are the maximum value, that is, in practice, replacement can be made more often.

Types of filter elements

It should be noted that there are two most common types of products: - coal type; - paper type.

The carbon element has excellent filtering characteristics. The product perfectly freshens the air, copes with dust and unpleasant odors (dampness, exhaust gases and emissions). The optimal place for use is large, polluted cities. The disadvantages include the rather high price and short service life.

Replacing cabin filter toyota camry v50

A paper filter element is much cheaper than a carbon one, and is slightly more durable under conditions of proper use. In principle, it also carries out all the necessary protective functions, but does not do it so zealously and thoroughly. The disadvantages include excessive fragility and wear when the product gets wet.

When and how often to replace?

To understand how often to replace the heater filter element in a hatchback, you need to look at the car’s service book: Lada Kalina manufacturers recommend updating the part every 15 thousand kilometers. However, the service life can be determined individually for each owner.

You need to understand that the cabin filter, performing the functions of purifying the air that enters the cabin, is exposed to contamination every day. The degree of blockage will depend on where the vehicle is used. For example, if you frequently drive across the field, the service life of the cabin cleaner will be significantly reduced. In this case, it will need to be changed more often - once every 5-10 kilometers.

Goals and tasks that we solved

We looked at how to replace a part called the cabin filter. In principle, you can not change anything, but simply clean it and return everything to its place. How best to accomplish this, the owner will decide for himself. Also, the instructions will be useful if the owner decides that it is necessary to change the stove radiator. First, the filter is removed, then the dashboard is removed, and then access to the radiator appears.

The filter element, if not changed for a long time, can crumble from any touch. In such cases, there is no need to take unnecessary risks. For those who are not confident in their abilities, it is easier to entrust all actions to professional repairmen.

To do this, you need to clearly know where the device is located:

Open the hood of the car.
Look from the front passenger side, between the windshield and the engine compartment.
The cabin filter is covered with a grille made of plastic.

To dismantle a worn product, follow the step-by-step instructions:

Remove the grid from the plastic. To do this, use a screwdriver to unscrew the screws covered with plugs on top. If the plugs cannot be removed easily, pry them open with a flat-tip screwdriver.
Now start removing the screws using a torx wrench. To prevent the wipers from interfering, it is also advisable to dismantle them, or, as an option, turn the car on and off when the windshield wipers are in the upward position.
To remove the protective casing, unscrew the 3 screws.
Finally, the casing can be pulled out. To avoid damaging the structure, first lift the side of the casing closest to the wing, and then slide it in the direction of the opposite wing.
Carefully, trying not to use much force, bend the plastic retainer with your fingers, and then remove the cabin filter.
Go through the free space where the old filter was recently installed with a vacuum cleaner, and remove any dust with a dry cloth.

A cabin filter marked 11180-8122010-08 is installed from the factory, but if you do not find this filter, you can install an analogue filter; the cost of the analogues is almost the same compared to the factory one.

Motor-Super /OAT/ 11180-8122010-08 from 150 rubles (installed from the factory)
LADA IMAGE 11180-8122010-82 from 250 RUR
ELEMENT EC-801 from 200 rub.
Kilometer FS-05 from 100 rub.
LEGION FS-05 from 130 RUR
Kilometer FSU-05 coal from 200 rub.
LADA IMAGE 11180-8122010-83 coal from 300 RUR

The choice of filter depends on your budget and preferences; according to some car enthusiasts, you should install a regular filter, while others are of the opinion that a carbon filter purifies the air better and allows less unpleasant odors to pass through. We always install regular filters.

Step-by-step instruction

It is known that the cabin filter of the Lada Kalina-2 is replaced every 15,000 km. The indicated numbers are the maximum value, that is, in practice, replacement can be made more often.

How to get to the cabin filter

To gain access to the part we need, follow these steps:

Approach the car and, without opening the hood, unscrew the 3 screws securing the right frill (see figure);
Open the hood, remove the negative terminal from the battery (you need a 10 key). Unscrew 2 more screws that hold the plastic frill and remove this part. A “t20” screwdriver fits under the head of the screws;
Using a regular Phillips screwdriver, all you have to do is unscrew the two bolts holding the filter compartment cover;
We remove the compartment cover, remove the filter along with the frame, and replace it.

If you decide to install a mesh, place it above the filter, not below it. In the standard version, however, only replacement is provided.

Plastic frame and filter element

Each owner can change the fuse or install a cabin filter without resorting to the services of a car service. But replacing a light bulb in a headlight is a more difficult task. But since we are talking about self-repair, we emphasize once again: as soon as the hood is open, disconnect the “negative” contact of the battery. At the final step, of course, it is necessary to return everything to the way it was.

Dismantling the old

Replacing the cabin filter begins with the work of removing the old filter. Before doing this, you should find out where the component will be placed. To do this, open the hood and find a compartment on the passenger side, which is closed by a grille made of plastic.

Kalina 2 station wagon or Granta Liftback which is better
Lada Granta speed sensor where is it located?

Procedure.

We dismantle the specified grille. To do this, we unscrew the screws, having previously removed the decorative plugs from the surfaces of their heads. To make removal easier, pry it off with a screwdriver.
Unscrew the screws (use a wrench with an asterisk tip). Here, for ease of operation, you should “retract” the wipers of the Lada Kalina 2. To do this, turn on the ignition, then activate the windshield wipers and turn off the power at the moment when these elements take a vertical position.
We dismantle the casing. To do this, unscrew the three screws, and then remove the protective component itself. To avoid damage to the structure, we proceed as follows: first, we lift that part of the casing that is located close to the wing, and then move it in the direction of the opposite wing.
Acting with great care, with scant finger effort we bend the plastic retainer, after which we boldly remove the filter “to freedom”.
Before installing a new component, we recommend treating the seat with a vacuum cleaner and a dry cloth.

Types of cabin filters

Evolution does not stand still, and neither does technology. In general, this is an old invention, but it has been used in cars for no more than 10 years.

Carbon cabin filter

Immediately after their appearance, such filters were installed only on expensive cars, mainly in the premium class. They have both advantages and disadvantages.

Pros of carbon filters

Filters out unpleasant odors. Such a filter is capable of capturing not only dust particles, but also the smell of dampness, fuel and exhaust gases. They are especially useful in cities where gas pollution exceeds all standards;
Some carbon cabin filters use silver ions. This will help further freshen the air in the cabin.

Disadvantages of carbon filters

Relatively high price. Compared to a conventional paper cabin filter, it can be two to three times higher;
Short service life. The carbon filter, as a rule, becomes clogged after just six months of operation, while for most cars the maintenance regulations require replacement after 10–15 thousand kilometers. Once the filter becomes clogged, it not only fails to cope with its direct responsibilities, but also begins to release all the odors that it previously absorbed.

Paper cabin filter

Paper cabin filters have some positive aspects, as well as negative ones.

Pros of paper cabin filters

Small price. This filter is much cheaper than a carbon filter;
Life time. It is a little larger, and even after it ends it does not begin to emit unpleasant odors.

Disadvantages of paper cabin filters:

Sometimes they don’t make it to the replacement date. They simply fall apart if moisture gets into them. Also, they can become completely clogged.

Perhaps these are all shortcomings.

Goals and tasks that we solved

How to change the cabin filter on Lada Kalina

Required Tools

new cabin filter for Lada Kalina car - model 1 987 432 230;
slotted or Phillips screwdriver;
TORX-20 star key.

Step-by-step replacement instructions (including for cars with air conditioning)

Open the hood of the car and find the grille that covers the filter. It is secured with self-tapping screws, and some parts of the filter are securely covered with special plugs. Using a Torx-20 wrench, carefully remove all the plugs and unscrew the bolts.

We press on the grate and with a slight movement of the hand we shift it to the right side. We remove the protective casing of the Lada Kalina stove in the place where the supporting part of the filter is located. There are three small bolts there that can be easily removed with a regular Phillips screwdriver.

The bolt located in the middle must be removed carefully, since the glass washer hose runs to the left of it, and it is very easy to damage. We press out the side fastenings, slightly bending the plastic retainer with our fingers, completely remove the old consumable, while making sure that all the debris does not fall inside

The last step is to install a new air barrier

We secure it using new special clamps. It is also worth noting that the model with air conditioning has hoses. If they interfere, we loosen the clamps that hold them in order to securely fasten the new filter. It may be necessary to replace the condensate itself in the air conditioning system for greater effect. The assembly of all parts occurs slowly and strictly in the reverse order. . As a rule, all these manipulations of replacing an old filter with a new one do not take more than fifteen minutes, except for the first time, when you need to delve into all the technical processes and details

If you still have any questions or certain steps are not clear to you, we recommend that you look at the practical guide to replacing the air filter on a Lada Kalina

As a rule, all these manipulations of replacing an old filter with a new one do not take more than fifteen minutes, except for the first time, when you need to delve into all the technical processes and details. If you still have any questions or certain steps are not clear to you, we recommend that you look at the practical guide to replacing the air filter on a Lada Kalina.

Video: How to replace the filter element

Replacing the cabin filter of a Lada Kalina
Replacing the air filter on a Lada Kalina is a simple and even interesting task. If desired, anyone can handle it in a fairly short period of time. At the same time, the price of a new imported filter is a maximum of 500 rubles, and replacement services at a turnkey service station will cost you approximately 1,500 rubles. Thanks to our instructions, you can save not only money, but also precious time.

Air filters

These filters are used in Kalina to clean the air entering the cabin and engine. Both filters are made of paper and do not last very long; their service life depends on where the car is used. If the car is used on gravel or country roads, the service life of these filters is sharply reduced.

Engine air filter

This filter is installed in the engine compartment in a special box and serves to clean the air necessary for the operation of the internal combustion engine, which is subsequently mixed with fuel to form a fuel mixture.

The filter must be replaced every 30,000 km, but if the car is used on dirt roads, it is best to replace this part with a new one a little earlier at 20,000 km.

Symptoms of a clogged engine air filter

When the air filter in a car becomes clogged, the following symptoms appear:

Engine power is lost;
Engine starting deteriorates;
The car engine stalls spontaneously;
No idle;

If such symptoms appear on your car, you need to check the air filter for frequency; if it is very clogged, and you don’t have a new filter at hand, you can pop it and put it in place. This will be enough to complete the train and buy a new filter.

Replacing the Kalina air filter

Replacing the air filter. Kalina

Unscrew the 4 bolts securing the air filter box cover and remove it;
Install a new filter and close the lid;

Cabin filter

It is installed in front of the stove fan and serves to protect it from debris, as well as to clean the air from harmful gases and various odors. The cabin filter also helps protect air ducts from contamination.

Symptoms of a clogged cabin filter:

The flow from the air ducts becomes noticeably weaker;
The stove or air conditioner loses its effectiveness;
An unpleasant odor appears from the air ducts;

If such malfunctions are detected in your car, you need to clean or replace the cabin filter.

Let's sum it up

Taking into account the above information, it becomes clear that poor ventilation and foggy windows are often directly related to the condition of the cabin air filter. An unpleasant odor may also appear, which can be clearly heard in humid and damp weather, even without turning on the air conditioner.

The reason is simple - the filter is clogged and not enough fresh air passes through it. This leads to the stove blowing weakly and the windows sweating. In turn, the organic elements on the filter create an unpleasant odor in the cabin.

How to replace the cabin filter of Lada Kalina - instructions with photos

When operating a vehicle in a dusty area, the mileage between filter changes should be reduced by 1.5–2 times.

The heating and ventilation system filter and the drainage hole of the plenum box are located under the right facing of the wind window.

Having opened the hood, use a Torx T-20 key to unscrew the five screws securing the right facing. Having opened the hood, use a Torx T-20 key to unscrew the five screws securing the right facing. Having opened the hood, use a Torx T-20 key to unscrew the five screws securing the right facing. Remove the right wind window trim.Remove the right wind window trim.Remove the right wind window trim. Using a Phillips screwdriver, unscrew the two self-tapping screws securing the cover. Using a Phillips screwdriver, unscrew the two self-tapping screws securing the cover.

Install the new filter in reverse order.

In this case, the arrow on the filter label should be directed downward, and the inscription “front” should be directed towards the front of the car. In this case, the arrow on the filter label should be directed downwards, and the inscription “front” should be directed towards the front of the car. In this case, the arrow on the filter label should be facing down, and the word “front” should be towards the front of the vehicle. When installing the right windshield trim, two trim protrusions must extend beyond the front fender flange. When installing the right windshield trim, two trim protrusions must extend beyond the front fender flange.

Reliable and unpretentious car, spare parts are cheap and easy to maintain. Please note this is all relative.

Replacing the cabin filter Lada Kalina 2

Second-generation cars are not much different from the very first models in terms of technology for replacing the cabin filter. But more modern models will require less effort and fewer manipulations from you. You will need the same set of tools: a Phillips screwdriver and a torx screwdriver. Replacing the cabin filter on Kalina 2 will take less time, since you will not need to “tinker” with the casing

Step 1

We lift the wipers up to make access to the cabin filter easier.

Then open the hood and pay attention to the right windshield, it is under it that the filter is located. To remove the cover, you need to unscrew all five screws using a torx screwdriver.

Step 2

After this, carefully remove the cover and unscrew the two screws securing the water deflector. When you remove it, you will see the old cabin filter, which needs to be removed. Then place a new element in its place, cover it with a water-reflecting shield, and fasten it with screws.

Beginner car enthusiasts will be helped to cope with this task by replacing the cabin filter of the Lada Kalina video. On the recording you can always see where the necessary elements are located and how to dismantle them correctly.

About differences in device location

Regardless of the class of the Lada Kalina, the cabin filter is located in the same place. Moreover, starting with Kalina-2, many parts (including filters) were transferred to all subsequent VAZ models, so the principle of replacing this device does not depend on the body type, engine size or the presence of a car radio.

The quality of the air that passengers breathe depends on the cleanliness of the cabin filter on Kalina. It is recommended to change it twice a year; the operation is not very complicated and takes no more than half an hour.

Types of cabin filters for Kalina

To prevent such problems from arising, you should carefully read the operating instructions included with a new car purchased at a car dealership. In it, the manufacturer indicates: replacing the cabin filter in a Lada Kalina car with air conditioning should be carried out every 10,000 km. After all, the cabin filter significantly affects not only the air quality in the car, but also the operation of the climate control system.

To ensure that the air inside the car is fresh and clean, and that the heating system works properly and efficiently, every car owner must at least approximately know where the filter is located and how to replace it.

It is also important to know what types of cabin filters to choose. After all, each type of filter element has its own advantages and disadvantages

There are two types of cabin filtration devices. Some are made on the basis of filter paper. Others use activated carbon as a filter material.

For people familiar with chemistry from the school curriculum, it is clear that carbon filters are more effective than paper filters. They not only trap dust particles, but are also able to absorb unpleasant odors contained in the street air. However, at high air humidity, paper filters work better than those made on the basis of activated carbon.

Replacing the cabin filter on Kalina and Grant

Carbon filter systems can also differ from each other. There are filters with fine carbon or with larger particles. The latter hinder the movement of air masses less, but at the same time they retain dust less well.

Features of the carbon filter

The good thing about a carbon filter is that there is a carbon absorbent between two shells of synthetic material. It will cope with its function perfectly, in addition, this part will not allow dust and similar air pollutants to pass through.

Absinthe also absorbs toxic elements that enter the cabin from the exhaust system of cars passing nearby. The coal material gradually absorbs harmful substances; its structure can be compared to the structure of a gas mask. The indicators of the cabin filter are different, it is ready to be used for 6-10 thousand km, but there are some factors that do not allow us to give an exact figure. Such filters are more often used in large cities with constant traffic jams. If you live in a small town, then the operating time can increase to 20 thousand km.

The carbon filter, of course, has its drawbacks, for example, desorption. This phenomenon occurs when using carbon and a cabin filter as an absorbent. That is, the functionality of coal may cease; it will simply stop absorbing toxic substances. As a result, all this will begin to enter the salon directly from the street. Of course, the coal will always react and try to absorb chemicals, but a circular process will occur. For this reason, it is recommended to change the filter elements.