A cabin filter is an element of a car that helps clean the air in the cabin while the vehicle is in use. If at any point the driver or passengers begin to feel unwell and find it difficult to breathe, then the problem is in the cabin filter.
An almost failed element is no longer able to cope with its responsibilities related to air filtration in the cabin, and it needs to be replaced.
An interesting fact is that when creating the Daewoo Nexia, manufacturers did not plan to install purifiers in the cabin. However, after several updates, it was decided to equip the car with air conditioning and a cabin filter.
Where is the filter located?
In most foreign models, the cabin filter can be found behind the glove compartment. But the manufacturers of Daewoo Nexia distinguished themselves and installed the part in the main compartment of the air conditioning system. Therefore, to get to the filter, you will have to work a little.
The price for an original cabin filter for this vehicle model is 350 rubles. Filter article number – 28828822. In addition to the original element, there are analogues that can also be used when replacing it. The most popular options along with the cost are shown in the table.
Manufacturing company | vendor code | Cost, in rubles |
TSN | 97110 | 120 |
Big Filter | GB9922 | 300 |
Fortech | FS132C | 250 |
AMD | AMDFC54 | 200 |
3F QUALITY | E2533 | 250 |
Video “Replacing the cabin filter of Daewoo Nexia”
Training video tutorial on replacing a cabin air purifier on a Daewoo Nexia.
Every car owner sooner or later notices that recently fogging of car windows occurs without obvious reasons, and is also surprised to discover that the windows on the inside are covered with dust and dirt particles. If the driver experiences difficulty breathing while in the car and smells disgusting odors, the conclusion suggests itself - it’s time to change the filter. The old one does not cope with its duties - filtering the air in the cabin. How to change the filter on a Daewoo Nexia, because this car is absolutely different from other cars in terms of configuration? To replace a spare part at home, you will need to follow the instructions step by step. Installing a new cleaner will take you about half an hour if you follow the replacement rules step by step.
When creating this car, it was not intended to install interior cleaners. However, having gone through several updates in the configuration, the Daewoo Nexia was equipped with air conditioners, and at the same time filters. Considering this fact, it becomes clear why car enthusiasts have to change this part on their own. In most foreign cars it is located behind the glove compartment, but not in the Daewoo Nexia. In this case, things are somewhat more complicated, because the design engineers decided to hide the purifiers in the main compartment of the air conditioning system - there is a rectangular filter there, and in the air intake of the heating structure - there is a round purifier. Now replacing the Daewoo Nexia cabin filter has become much easier, because knowing where the required part is is already half the battle.
Tools for work
To replace the spare part yourself, you will only need angelic patience and accuracy, as well as a knife and screwdriver. An absolutely inexpensive option for repairing your car will not require expensive equipment and car service services. You will need a screwdriver to unscrew the screws, and a knife to make cuts. Please note that replacing the Daewoo Nexia cabin filter requires care and attention and should not be rushed.
Step-by-step installation instructions
In DaewooNexia, the entire replacement process takes place in several steps.
Step one
For proper installation you need:
- remove the seal;
- Unscrew the screws that hold the plastic cover, as well as the visor;
- take out the lining, then the drainage plate, move the edge of the seal to the side and take out the old spare part;
- Carefully clean the mounting area from dirt and debris, and vacuum it if necessary.
Step two
The new cleaner is inserted horizontally, with a rubber seal attached on top of it. Having completed all these steps, you can begin to assemble the structure back to return everything as it was. To make sure that everything is done correctly, check whether the structural element is tightly installed and whether it is not loose.
Installation of a rectangular filter
To install the purifier, unscrew the screws supporting the visor and trim, remove the trim and drainage plate, cut off the partition located in the rectangular opening of the air intake with a knife, and install the purifier. The advantage of the installation is installation without damaging other parts. To increase flexibility, just make a cut in the middle. When deciding to replace the rectangular filter, keep in mind that after replacement the recirculation damper will be blocked. It is recommended to replace in spring and summer.
Why is it important to replace the part on time?
The filter is necessary to maintain a special microclimate in the car enthusiast's car. If reinstallation is not done in a timely manner, the driver and passengers inhale dirty air, dust particles, germs and heavy compounds. The driver should remember that the air on the roadway is toxic and contains more than two hundred types of toxic substances. The health of motorists suffers, and respiratory diseases develop. Thanks to filtration, it becomes safe to be inside a vehicle, because filters prevent dust particles from entering the car and also absorb substances harmful to the human body. To maintain good health and maintain clean air in the cabin, you should take care of timely replacement of Daewoo Nexia purifiers. Experts recommend replacing every 10,000 - 20,000 kilometers. By replacing the purifier in time, you will prevent damage to the interior heating fan, and its purchase and installation will cost much more.
A number of conclusions can be drawn:
- Replacing the cabin filter on a Daewoo Nexia must be done on time, following the manufacturer's recommendations. When regularly driving on unpaved roads, especially in rural areas, the filter may need to be changed more often than the manufacturer recommends.
- Before dismantling and installing a new filter yourself, it is recommended that you read the technical literature and watch video material on the topic. There are plenty of educational videos on the Internet.
- The work can be carried out at a service center or you can deal with the problem yourself. This does not require higher technical education. You only need three things: free time, working tools in good technical condition and premises.
- When choosing a filter, it is advisable to use original spare parts, or purchase analogues. You can make the filter yourself.
- It is necessary to exclude the purchase of a cabin filter for the Daewoo Nexia in the automobile markets. There is a high probability of purchasing low-quality products under the guise of a well-known brand or original.
- You should buy parts and spare parts in specialized centers, auto/shops. Sales consultants will select the required product taking into account the vehicle model.
Replacing the engine cabin filter is one of the mandatory procedures for maintaining a car in technically sound condition. A technically correct car is the key to the health of the driver and all road users.
Additional malfunctions in the car can lead to unforeseen situations, putting the lives of drivers and passengers at risk.
And further:
Important! Do not wait until the appointed replacement date arrives, but at the first sign of an unpleasant odor in the cabin, change the product. It will be more reliable this way!
Take care of your cars, change spare parts on time, take care of your health. Don’t forget to subscribe to the blog newsletter, there is a lot of interesting and useful information ahead of you.
Many owners of the Daewoo Nexia have encountered problems when car windows fog up for no reason, dust and a light coating of dirt appear on the inside of the windshield, or when the air in the cabin remains heavy and filled with gases and an unpleasant odor. All these symptoms indicate that the Daewoo Nexia needs to replace the cabin filter. The main function of this consumable is to clean the air entering the cabin from pollen, soot, unpleasant odors and dust. If a high-quality filter is installed on a car, it can reduce the concentration of harmful substances in the cabin air by four to six times. Replacing the cabin filter on a Daewoo Nexia is a simple job that takes about half an hour. Many owners change the filter themselves, because this saves money and time.
Location of the cabin filter on the Daewoo Nexia
Modern cars of all models must have a cabin filter installed, however, despite the fact that the Nexia is the successor to the Opel Cadet model, and that the car has been rolling off the assembly line in an updated version since 2002, the original configuration of this car did not include this element. When the model began to be equipped with air conditioning, the developers allocated a special place for installing a filter that cleans the air. On the Daewoo Nexia, the cabin filter is replaced not from the glove compartment, as on other domestic and foreign models, but in the compartment responsible for the air conditioning and heating system of the car. A round filter is installed in the heating compartment, and a rectangular one in the air intake area.
Replacing the cabin filter on a Daewoo Nexia
Although the filter element on this car model is not located under the instrument panel, but in the engine compartment, to replace the cabin filter on a Daewoo Nexia you will need a standard set of tools, which includes a screwdriver and a knife for cutting the air intake partition and making a cut on the filter element. The replacement process is carried out in two stages. First, remove the rubber seal, unscrew the screws that hold the visor and the plastic trim. Then we dismantle the drainage protective plate and the lining. By bending the round seal made of rubber, we take out the old cabin filter, if it is installed on the car.
To complete the second stage of replacing the cabin filter, you will need to clean or vacuum the place where the filter element is attached. Then you can place the new filter in a horizontal position and put the rubber seal on it. All that remains is to assemble all the parts in reverse order. If the replacement is carried out correctly, the filter should fit into the standard seat so that there is no wobbling or play. If necessary, you can install or replace a rectangular cabin filter located in the area of the main air intake. To do this, remove the screws securing the visor and the trim, and pull out the plate along with the trim. Then you will have to cut off the interfering part of the rectangular air intake hole with a knife and place the rectangular filter in the air duct. Some craftsmen manage to install the filter so that they don’t have to cut or file anything away in the engine compartment. To do this, you just need to make a cut in the middle of the element to achieve the desired flexibility. After installing a rectangular cabin filter on the Daewoo Nexia, the recirculation flap will not be able to close and open, but will always be in a blocked state. Therefore, it is best to install such a filter in the spring and summer, when the functioning of this element is not necessary.
The Daewoo Nexia car is a subject of dispute among many of its owners. The fact is that on restyled versions produced since 2002, the designers provided space for installing this unit. Before this, there was no standard place for mounting a cabin filter on a car. So is there a cabin filter on the Daewoo Nexia or not? The answer, alas, will be negative. At the same time, for those who want to install it, there is a big difference in exactly when their sedan was produced. It is one thing to install the original filter element in its original place, and quite another to do it on a machine where this unit is not provided at all.
How to change the Daewoo Nexia cabin filter yourself.
Replacing the cabin filter
You can replace the cabin filter yourself, saving a significant amount of money that you would have to spend when visiting a service station. If you wish, you can watch a video of installing a new filter.
Tools
Before talking about replacement, you should clarify which tools can be used to do this. To carry out the procedure you will need to stock up on:
- with a knife;
- screwdriver;
- new cabin filter.
Also, experienced car enthusiasts note that replacement work requires careful and careful execution, since not only the cabin filter will be affected, but also the air conditioning system in which it is located.
Where is the Daewoo Nexia fan switch sensor located - Auto repair
The Daewoo Nexia has not one temperature sensor, but three. Each of them is responsible for different temperatures in certain parts of the engine.
Coolant temperature sensor
A temperature sensor is necessary to monitor the temperature of the coolant to maintain the optimal level of the air-fuel mixture. If this sensor malfunctions, the electronic engine control unit no longer receives correct information about the coolant.
As a rule, this makes the car “sore”, that is, it is difficult to start even at 0 temperatures. In addition, average fuel consumption will increase. In the event of a malfunction, it also happens that the ECU goes into emergency mode and the “CHECK ENGINE” lamp lights up on the instrument panel.
On new generation Daewoo Nexia cars (N150) this sensor is located under the ignition coils. On older Daewoo Nexia (N100) models with Euro-2 exhaust emissions, this sensor is located under the ignition distributor. On F16D3 engines there is a coolant temperature sensor between the first and second cylinders of the engine.
How can you check the sensor for its functionality? You need to check its resistance at different temperatures using a multimeter and a thermometer. The sensor readings should follow the table of optimal temperatures. As a rule, this table can be found either on the Internet or with a “smart” book for operating Daewoo Nexia.
Coolant temperature gauge sensor
This sensor is needed to display temperature information on the instrument panel via a pointer. This sensor on Daewoo Nexia is located in the cylinder head (cylinder head) near the intake manifold, near the first cylinder. This sensor is also tested for performance by resistance at different temperatures using a multimeter and thermometer. These readings must also correspond to the table of optimal temperatures.
Air temperature sensor entering the cylinders
Using this sensor, the electronic engine control unit monitors the intake air temperature to optimize the air-fuel mixture. If there is a malfunction, the car has difficulty starting and sometimes stalls when idling. In addition, the electronic control unit goes into emergency mode and the “CHECH ENGINE” lamp turns on.
This sensor is located in the air filter housing on old Daewoo Nexia. On new Nexias with the F16D3 engine it is located in the air supply pipe. To check its functionality, like the previous two sensors, it should be tested for resistance at different temperatures. Again, this will require a maltimer and a thermometer.
Source: https://555-shop.ru/remont/gde-nahoditsya-datchik-vklyucheniya-ventilyatora-deu-neksiya.html
Replacement steps
The replacement sequence consists of several steps:
Step 1. First of all, you will need to remove the system seal. To do this, use a screwdriver to unscrew the screws that secure the plastic cover. You also need to remove the visor. After this, the pad can be easily removed, and the plate itself can be moved to the side. This will open the way to the old filter, which will need to be dismantled.
Step 2. Then you can begin installing the new element. It must be inserted horizontally. A rubber seal should be attached to the top of the filter, facilitating reliable fixation and preventing dirt from penetrating into the interior.
Step 3. When the installation of the new part is completed, you will need to reassemble the air conditioning system structure. At the same time, you need to ensure that every detail falls into place. If any element becomes loose, it must be reinstalled.
Replacement instructions
The purpose of this cleaning element is to combat the entry of soot, dust, pollen, and “heavy” unpleasant odors into the cabin of your car. It can reduce the concentration of harmful substances inside the machine by 4-6 times. The procedure for replacing the purifier itself is extremely simple and will not take more than 20-30 minutes. However, if you decide to do this yourself and do not have sufficient knowledge and skills, you must be very careful and carefully follow the video and photo instructions you found.
Where is?
Automakers install cabin air filters on almost all modern cars. However, despite the fact that the Daewoo Nexia is the successor of the Opel Cadet, and has been produced in an updated version since 2002, the original configuration did not include a cabin filter at all. Only after the car was equipped with air conditioning did Daewoo Nexia design engineers find original places to install air purifiers. Therefore, car enthusiasts have to install and change air purification elements themselves.
Location of filter elements of the air purification system
It is useless to look behind the glove compartment, as in many models of foreign and domestic cars. The designers decided to place them in the main compartment of the air conditioning system and the air intake of the vehicle's heating system.
A round one was suitable for the heating compartment, and a rectangular one for the main air intake.
What will you need?
Despite the fact that the air cleaning elements are located not under the dashboard, but under the hood, to independently replace the cabin filter on a Daewoo Nexia you only need:
- screwdriver for unscrewing screws;
- a knife to cut off the air intake partition or make an incision on the filter element;
- skillful hands and a little patience.
Loading …
Stages
Replacing the air purifier in the heating compartment is carried out in two stages, you must:
- Remove the rubber seal.
- Unscrew the screws holding the plastic trim and visor.
- Remove the cover and the protective drain plate.
- Bend the round rubber seal and remove (if there was one) the old element.
The first stage of replacing the filter of the air purification system.
We move on to the second stage, you need to:
- Clean and vacuum the mounting area.
- Insert the new filter horizontally.
- Reinstall the round rubber seal.
- Reassemble the entire structure in reverse order.
The second stage of replacing the air cleaning filter element.
If you have done everything correctly, then the structural element of the compartment should fit tightly, without play or wobble.
You can also install (or replace) a rectangular cabin filter. It is located in the main air intake system.
To do this you need:
- Remove the screws holding the plastic trim and visor in place.
- Pull out the cover and the protective drainage plate.
- In the rectangular opening of the air intake, cut off the interfering partition with a knife.
- Install the rectangular element into the air duct.
Installing a rectangular filter in the air intake
With a little ingenuity and patience, you can install the cleaner without sawing or cutting anything directly under the hood. It is enough to simply cut the element in the middle, thereby increasing its flexibility. Thanks to this, it will easily fall into place.
The second option for installing a rectangular air cleaning element
However, it is worth keeping in mind that after installing or replacing a rectangular cabin air purifier on a Daewoo Nexia, the recirculation damper will stop closing and will remain blocked for the entire period of operation of the device. Therefore, it is recommended to install it in the spring and summer, when the damper is practically no longer needed.
To ensure that the air in the cabin of your car is always clean and pleasant, experts recommend changing cabin filters on your Daewoo approximately every 10-20 thousand kilometers.
What about a rectangular filter?
If a rectangular filter is used as a replacement element, its installation will be slightly different. For successful installation, you will need to unscrew several additional screws holding the trim and visor, and also cut off the partition with a knife.
The partition is located in the rectangular opening of the air collector, where the filter will subsequently be installed. The advantage of such installation is that it reduces the risk of damage to other structural elements of the car.
How to properly change the cabin filter on a Daewoo Nexia?
Among urban car models, Daewoo Nexia is rightfully considered one of the most popular. Over the two decades of the series' existence, more than half a million cars were produced. This popularity is largely due to the high level of comfort, which, in turn, depends on the condition and quality of the cabin filter. This article describes the frequency of replacing this part, the procedure itself, as well as the design and features of the filter element.
Why is it important to replace the filter promptly?
If you do not change the cabin filter in time, it can affect the performance of other devices and systems of the car, worsening their overall condition. Thus, the service life of each element will be noticeably reduced, and in the near future after the cabin filter fails, the systems and devices in use will also stop working. The result of ignoring timely replacement will be costly repairs.
Also, a poorly functioning cabin filter can harm passengers and the driver. The fact is that this part prevents toxic substances, dust and other suspended particles from entering the cabin. Thus, the old filter will turn out to be a bad obstacle, and all toxic substances will penetrate inside the cabin, poisoning the air. The respiratory organs of all people sitting in the car will suffer.
As a result, it should be said that the cabin filter is a very important part, which in Daewoo Nexia is recommended to be replaced every 10-20 thousand kilometers.
When should you change the cabin filter?
There is no doubt that after a successful installation of the filter element, you will fully experience the delights of being in a cabin with purified air. But your joy will not last forever - over time, the filter will inevitably become clogged and stop performing its functions. You will feel this moment by a noticeable weakening of the airflow, the appearance of dust in the cabin, and frequent fogging of the windows. Since the filter is not standardly installed on the car, you will not find recommendations for replacing it from the automaker. Experts advise replacing the Daewoo Nexia cabin filter at least once a year. This is usually done during maintenance, but many car owners prefer not to overpay and perform this operation themselves as needed, when the symptoms described above appear. Moreover, this does not require much time or experience.
(SF) is to clean the air entering the car. It is recommended to check its condition from time to time so that drivers and passengers of the car do not have to breathe dust. We will tell you below how to replace the cabin filter of a Daewoo Matiz and how often it needs to be done.
[Hide]
Features of the Daewoo Nexia ventilation system
The Uzbek automotive industry has its own understanding of how the air recirculation system in a modern car should be designed. This is probably why the cabin filter on Daewoo Nexia is found haphazardly and extremely rarely. Many owners of this budget car have no idea where the cabin filter is located or whether it even exists. Regardless of whether our Nexia has a cabin filter or not, in order to ensure an acceptable microclimate in the cabin, the filter must be found and replaced. And if not, install it.
Nexia with air conditioning must, according to technical conditions, be equipped with a cabin filter, but unfortunately, this is not always the case. The presence of a filter in a car with air conditioning is doubly important, since the microclimate of the evaporator strongly promotes the formation of various pathogenic bacteria. A warm and damp atmosphere is exactly what is needed for the growth of mold and fungal bacteria, which enter our lungs, causing, at best, allergies.
Rules for choosing a new filter
Daewoo Nexia is equipped with 2 types of cabin filters: rectangular and round. A rectangular filter is installed in the air intake of the ventilation system. To do this, buy the following brands of filter consumables:
- NF-6185 regular anti-dust,
- NF-6185c with activated carbon.
The round cabin filter is placed in the heating compartment.
To change it, select products with the following catalog numbers:
- TSN No. 9-7-110 – anti-dust with a rigid frame;
- TSN No. 9-7-199 – charcoal salon;
- GM 28828822 - original from General Motors.
Which device to choose, regular or coal, is a matter of taste for the car owner. A cheap accessory made of filter fabric traps dust particles, road debris, and insects. Devices containing activated carbon prevent unpleasant odors of gasoline, exhaust gases, etc. from entering the cabin.