How to choose and replace antifreeze on Daewoo Nexia: instructions and photos

To ensure that the engine of this car model does not overheat in the summer, does not freeze in the winter, and also lasts longer, you need to know what kind of antifreeze to fill in the Daewoo Nexia. Today there is a huge range of products of this kind for every taste, but not all of them are suitable for use with this machine. Which coolant should you take without hesitation, and which should you put aside?

In this article we will talk about:

• What does coolant consist of and when does it need to be changed?
• what antifreeze is suitable for the Daewoo Nexia car model
• what conclusions should be drawn from the article
• what consequences should you expect from using a product of poor quality or unsuitable technical characteristics?

How to change coolant

Before replacing antifreeze or antifreeze in a Daewoo Nexia car, you need to find out where it needs to be poured, what volume and what brand. The replacement of the product will take place in the expansion tank, which is located in the engine compartment on the mudguard, next to the bracket and secured with clamps.

You will need to purchase a volume of 10 liters of antifreeze. You can also buy antifreeze. What is best for Daewoo depends on tastes. How to drain and replace antifreeze from Daewoo Nexia 8 valves. Self-replacement of antifreeze n150 8 antifreeze valves in Daewoo Nexia. Antifreeze is slightly inferior to the qualities of antifreeze

Moreover, it is sold ready-made, which simplifies the use of the substance. Choose only high-quality, time-tested products. Daewoo Nexia car replacement of antifreeze antifreeze for VAZ-2112 16 valves; replacing antifreeze. Replacing the timing belt for Renault Logan 1.6 8 valves. And try to always use the same manufacturer brand for the Daewoo Nexia car.

Coolant replacement procedure

According to the technical documentation on Daewoo Nexia cars, a planned replacement of the internal combustion engine cooling should be carried out after 2 years of operation or every 40,000 km.

Every car owner can easily replace the coolant, only for this he needs:

• clean rags;
• new coolant;
• pliers;
• container for liquid.

The replacement procedure itself consists of the following points:

1. Raise the car on a lift or drive it into a viewing hole.
2. Unscrew the cap from the expansion tank.

3. Drain the old coolant. To do this, you need to unscrew the tap at the bottom of the radiator on the right side. Do not forget to place a previously prepared container under the drain hole.

What happens to the car if there is not enough antifreeze?

If there is not enough antifreeze in the system or it was not replaced in a timely manner, the following problems may occur:

• The heater does not operate at maximum efficiency. The operation of the stove is impaired due to insufficient fluid in the system. If the antifreeze is contaminated, the pipes may become clogged. This will lead to obstruction of fluid to the heating radiator. Antifreeze will circulate through the lines ineffectively.
• The power unit is overheating. If there is not enough antifreeze in the system, the cooling effect is insufficient. The beneficial properties it possesses are not enough to effectively cool an internal combustion engine. The result is overheating and expensive engine repairs.

To avoid these problems, it is necessary to periodically monitor the fluid level in the system. Antifreeze has an expiration date and the fluid needs to be replaced over time. This needs to be monitored carefully.

Stages of work

You can replace the antifreeze in a Daewoo Nexia at a car dealership, but the process is simple and won’t take much time, so you can do it yourself.

Step-by-step instructions for draining old fluid from the tank:

• The car is driven into a pit or onto an overpass to make it more convenient for the owner to work. To drain all the liquid from the cooling system, the engine must be warmed up, thus opening the thermostat valve. After warming up, the car is placed on a jack on the left side of the front wheel;
• The hood of the car opens. The car owner finds the tank he needs and unscrews the cap;
• Then you need to find the crankcase under the car and, using wrenches, unscrew the fixing bolts from its protection;
• During this entire procedure, the car’s engine will cool down a little, the main thing is to make sure that it does not cool down completely. When the engine is warm, open the heater valve. Don’t be afraid, a little antifreeze will spill out of it, so you should substitute the container in advance;
• Next, you need to unscrew the drain plug on the radiator and place a wide container prepared in advance so that the waste liquid flows into it. In Daewoo Nexia, the tap is not very conveniently located, so the coolant will flow down the body. If the car owner completely changed the radiator, then there is a possibility that there will be no tap on it. In this case, you will have to disconnect the hose from the system and pump the used antifreeze directly from it into a container.

Step-by-step instructions for flushing the cooling system in a car:

• In order to properly replace antifreeze, the cooling system should be completely flushed, which many drivers do not do because they do not consider it necessary. The first thing you need to do is screw the valve back on the stove and radiator;
• Distilled water is poured into the antifreeze tank. Usually you can use about 6-7 liters, the main thing is that the level reaches the minimum mark. It should be remembered that the cooling system should be cleaned only with distillate, otherwise tubes, hoses and valves may be damaged;
• The tank cap is screwed in, after which the engine starts and the cooling system turns on. Thus, the distillate is driven through all elements of the mechanism;
• The system should work for about 5 minutes, the water level should decrease, which means that all the air has escaped;
• Next, exactly as described above, drain the distilled water from the system. If the car owner sees that the water has the color of antifreeze, a pungent odor or a dark sediment, it means that not everything has been washed yet and the procedure should be repeated several more times. Only after clear liquid has flowed out of the car can this stage be considered completed.

The refrigerant is filled as follows:

• All valves and taps are tightened, the radiator pipe is attached to its place;
• Antifreeze is poured into the expansion tank to a level between the MAX and MIN marks;
• The plug is tightened, then a control trip is carried out. You should drive for about 5 minutes and open the hood again and unscrew the plug;
• The air accumulated when filling in the refrigerant had to come out during the trip, which means the liquid level in the tank has decreased, it needs to be topped up.

The procedure should not take the performer more than 30 minutes, since the Daewoo Nexia is an easy-to-maintain car. The technical arrangement of parts and spare parts is designed in such a way as to make servicing the machine as easy as possible.

8 valves

An important element when replacing the refrigerant in the described car is the number of engine valves, since due to the different number of valves, the volume of liquid being filled also differs. When replacing antifreeze on a Daewoo Nexia with 8 valves, about 6.2 liters of refrigerant are poured into the tank.

Volume varies due to engine power. If a car has 16 valves, it will accordingly need more cooling, since it will consume more energy.

16 valves

When replacing antifreeze in a Nexia with 16 valves, about 6.7 liters of refrigerant are used. The differences between replacement with a 16-valve and 8-valve engine are only in volume, otherwise the procedure and process are completely the same. The main thing when planning work, when purchasing antifreeze, is to know which engine is in the car in order to buy the appropriate and necessary volume of coolant.

How to drain

First, you need to stock up on some tools:

• refill element;
• clean rag;
• container for draining (volume not less than 8 liters);
• pliers.

1. Place the car on lifts or just a flat surface.
2. There will be a plug on the expansion tank, unscrew it.
3. Place a container for drainage. Replacing piston rings for a VAZ-2110 8 valves. The engine is the heart of the car. The operation of all systems and the entire unit as a whole depends on its proper operation. Turn off the tap.
4. Now you can drain everything.
5. It is necessary to drain all the liquid completely.
6. Using pliers, compress the fastening clamp and remove the hose from the pipe. Now you need to drain the substance from the engine.

Pour liquid into the reservoir

How to fill

If the first part of the work was successful, we move on to the second.

1. Screw on the faucet and put the hose in place.
2. Fill the engine cooling system with the required amount of antifreeze. Wait until it starts to flow out of the fitting and install the hose. Secure the clamps.
3. The cap on the tank must be tightened.
4. Turn on the engine and let it run until the fan turns on.
5. Unplug it and check the level.

Done, replacement

liquid substance on a Daewoo car is finished.

We hope that this article was useful to you and became a small guide to car repair and care. Replacing the timing belt Renault Logan 1.6 8 valves and 1.4. Monitor and check the temperature of your car and do not forget to measure the level.

Parts and consumables:

Therefore, it is advisable to always use the same brand of antifreeze. And under no circumstances should you mix these two brands! When mixed, only its lifespan suffers, dropping to 3 years, but overall mixing gives acceptable results.

In general, you should not be guided by antifreeze by its color, as is usually customary here. You should not divide them into “antifreeze”, “yellow antifreeze”, “green antifreeze”, “red antifreeze”. Instead, it is better to carefully read their composition, think about their action and compatibility with what is currently loaded.

Initially, this was a nomenclature designation for antifreeze specially developed for VAZ cars during the construction of the plant in Togliatti. The Italians were not satisfied with the quality of the “Antifreeze” that existed at that time in the USSR; they demanded the creation of a new antifreeze. TOSOL is an abbreviation: Technology of Organic Synthesis of OL alcohol according to chemical nomenclature. Now this name has become simply a household name. Antifreeze is a type of antifreeze.

Each manufacturer uses its own package of additives, including even in the line of one manufacturer, antifreeze may differ in the number and composition of additives used. Additives can be anti-corrosion, anti-foam, reducing the impact on rubber, etc.

Preparing for work

Before draining antifreeze from the Daewoo Nexia block, you should determine the volume of liquid. The coolant level can be determined by eye by diagnosing the amount of antifreeze in the tank. Open the hood and look into the reservoir in which the antifreeze is stored. The tank is marked with MIN and MAX marks. If the liquid level is between these marks, then the volume of refrigerant is optimal. You should not check the amount of fluid while the car is running with a hot engine, as the coolant level will be higher.

To change the fluid in the Daewoo Nexia, the car owner will need the following tools:

• Purchased or old rags;
• Regular pliers;
• A wide container where old antifreeze from the tank will drain. It is better to choose a wide reservoir, since in case of a leak or if antifreeze spills due to carelessness, it will fall into the container. Car owners choose cans.

You should take care of your own safety. Turn off the car engine, put on gloves and cover your eyes with plastic glasses. Car owners rarely adhere to safety precautions, but antifreeze is a chemical and if it gets on the cornea of ​​the eye, you can lose your vision. Take care of your own health and follow safety precautions even in such small things.