Sherkhan Logicar 1 no auto start automatic transmission

Car alarm Sherkhan Logicar 1 is considered one of the most reliable products from the manufacturer. Using two-way communication, the user will be alerted to any problems related to the car. Among the disadvantages of the complex, consumers highlight the complexity of installing the system.

Logicar 1 functionality

How to install an alarm?

User manual

Designations of buttons and symbols on the key fob

Photo gallery “Tuning tables”

Download installation instructions for the Sherkhan 1 alarm system in PDF format

Video “How to hack Sherkhan alarm system?”

Comments and Reviews

Equipment

First, let's look at the components that are included in the car alarm kit:

  1. User's manual for installation. The documentation describes in detail how to install and connect the elements of the complex to the on-board network of the machine.
  2. Instructions for use. Allows you to configure and correctly program the main options of Scher Khan Logicar.
  3. Installation and connection map.
  4. Main control module.
  5. Pager. Used to control and adjust basic parameters and functions. Using the key fob, you not only turn alarm signals on and off, but also configure the complex.
  6. Spare communicator. The device does not have a screen, but it also allows you to perform basic functions.
  7. Installation kit. Includes power leads with connectors.
  8. Impact controller. Used to record any physical impacts on the car body and send information about this to a pager.
  9. The Valet button is intended to switch the system to service mode. Equipped with a wire with a connector for connection.
  10. Transceiver with plug connected.
  11. Engine blocking relay.
  12. One limit switch. Can be used for installation on the hood or trunk door.
  13. Siren.
  14. Sticker for attaching the transceiver to the glass.

Advantages and disadvantages

The advantages of this Sherkhan model:

  1. Extensive functionality. The alarm system is equipped with many options that not only protect the car, but also simplify its use: synchronization of communicators, silent security mode, delayed engine start.
  2. High reliability. In fact, it is almost impossible to hack the Sherkhan Logicar 1 signaling system by intercepting the code due to the author’s signal encoding system.
  3. Affordable price. The cost of the alarm ranges from 3,800 to 5,000 rubles, depending on the region of sale.
  4. Decent build quality. All elements and devices that are included in the system are supplied in a durable protective case.
  5. No false positives. If the sensitivity of the shock sensor is correctly configured, the consumer will not be faced with the activation of the alarm mode for no reason.

Technical properties

Properties of car alarm Logicar 1:

  • the “signaling” uses Magic Code PRO 2 technology, which allows for protection against signal interception;
  • the operating range of the remote control with the control device is up to 1500 meters in alert mode and up to 500 meters when sending commands;
  • if the communicator is lost, the procedure for disabling the security mode can be carried out using a special password;
  • another code can be used to gradually disable the protection mode;
  • the turbocharged mode can be configured so that during its operation the cooling time of the engine turbine changes.

The Auto Project video shows how to hack the Sherkhan anti-theft system.

Characteristics of car alarm Scher Khan Logicar 1

NameOption
Brand / BrandScher-Khan / Logicar 1
Year of issue2010
FeedbackYes
Communication typeDouble-sided
Signal acquisition range1000 m
Transmission range1000 m
Engine startingYes
Key fob type (LED/LCD)LCD
Signal encodingYes
Shock sensors includedYes
Door lock protectionPresent
Manufacturer countryRussian Federation
Guarantee period12 months
PriceFrom 4000 to 6000 rubles
Active and passive safety
Signal interception protectionYes
Code to unlock if lostPin
Circuit shutdown of security systemPIN code
Engine turbine cooling mode in case of overheatingYes
Pit stop modeYes
Panic ModeYes
Automatic start
Automatic start for automatic transmission / manual transmissionYes
Work on gasoline and diesel unitsYes
Programming the automatic start timeYes
Maximum interval before remote start24 hours
Keychain
Execution formClassic four-button
Availability of liquid crystal displayYes
Possibility of programming from the key fobYes
Audible confirmation of activationYes
Indication of operating time of the power unitYes
Feedback NoticeYes
Interior temperature alertYes
Low battery alertYes
Battery voltage indicationYes
Vibro modeYes
Energy saving functionYes
NutritionAAA battery, 1 pc.

*price indicated as of 02/17/2019.

Logicar 1 functionality

The main function of the alarm is to ensure the safety of the machine.

The system is equipped with the ability to start a car engine from a distance, the features of which are as follows:

  • the use of this option is allowed on cars with manual transmission and automatic transmission, as well as on cars equipped with an ignition with a Start/Stop button;
  • This option can be used on vehicles with engines powered by diesel fuel or gasoline;
  • you can adjust the start time of the internal combustion engine;
  • the option can be implemented in a time interval every two, four or eight hours;
  • You can start the internal combustion engine remotely by sending a command from the communicator.

Separately, we should talk about the functions of a pager with a screen:

  • as confirmation of completed or unexecuted options, a message is sent to the pager from the central module;
  • if you have a second car, then the pager can be linked to its alarm system, of course, when Sherkhan Logicar 1 is used on it;
  • the pager screen displays the operating time of the internal combustion engine when the Turbo mode, Pit Stop function or remote start is activated;
  • the communicator displays a two-way signal indication;
  • the screen displays the temperature level in the car interior;
  • the communicator can inform the car owner about changes in the voltage of the car's electrical network, the diagnostic command is sent from the pager;
  • the key fob allows you to determine the charge level in the gadget’s power source;
  • vibration alert option;
  • The energy saving mode will prevent rapid discharge of the power source in the key fob.

Anton Kovalev showed how the Logicar model works on Renault Duster.

Advantages and disadvantages

Advantages of Sherkhan Logicar 1:

  1. Wide functionality. The model has the necessary options to protect the car.
  2. Reliability. As a result of the installation, the consumer does not have to worry about the safety of the vehicle.
  3. Low price. The cost of an anti-theft agent ranges from 3,800 to 5,000 rubles on average.
  4. High build quality. All components of Sherkhan Logicar 1 are made in a durable casing, which prevents them from breaking as a result of falls or other physical impacts.

The disadvantages include the fact that, judging by consumer reviews, malfunctions may occur in the operation of the Sherkhan Logicar 1 alarm system. Usually this drawback is due to the fact that during installation the requirements that the car must meet were not met.

Sherkhan Logicar 1 autostart connection diagram

The model has the necessary options to protect the car.

  • Reliability. As a result of the installation, the consumer does not have to worry about the safety of the vehicle.
  • Low price. The cost of an anti-theft agent ranges from 3,800 to 5,000 rubles on average.
  • High build quality.
    All components of Sherkhan Logicar 1 are made in a durable casing, which prevents them from breaking as a result of falls or other physical impacts.
  • The disadvantages include the fact that, judging by consumer reviews, malfunctions may occur in the operation of the Sherkhan Logicar 1 alarm system.

    Usually this drawback is due to the fact that during installation the requirements that the car must meet were not met.

    How to install an alarm?

    Installation is done like this:

    1. The battery turns off. This is required to deactivate the voltage in the on-board network. Otherwise, during installation, you may accidentally short the contacts on one of the devices to ground, which will lead to breakdown. To disconnect voltage from the battery, disconnect the cables with terminals.
    2. Install the processor module in the cabin. Choose a location for installation so that the device is inaccessible to a criminal if the car is broken into. It is best to install the device behind the control panel; this place is the most difficult to access, and you will also have to disassemble the center console. Remove the steering wheel and dashboard trim, disconnect the plugs with wires from the device. Determine a free space behind the dashboard and install the unit in it. To eliminate the negative impact of vibrations on the device while driving, the module can be wrapped with foam rubber.
    3. At the next stage, a siren is installed; it must be placed under the hood. Choose a location that will be least exposed to moisture and high temperatures. Installation of the device near the cylinder block is not allowed; subsequently the siren will melt and will not be able to perform its functions.
    4. The shock sensor is mounted in the passenger compartment. It cannot be placed under the bottom; the controller will quickly fail as a result of exposure to dirt and moisture. Install the sensor in the center of the body, this will allow it to effectively detect impacts on the car from all sides. You can place the device on the partition that separates the engine compartment and the interior.
    5. Install the antenna on the inside of the windshield. You can mount the transceiver under glass on the dashboard, but it is advisable that this element be located as high as possible in the cabin. This will ensure efficient reception and transmission of signals. Please note that the quality of the pulses is affected by the presence of metal objects near the antenna. It is advisable that they be located no closer than 4 cm from the device.
    6. Install the limit switch to the hood. After installation, route the connection cable to the switch into the car interior.
    7. Install the service key. The Valet button must be disguised, since it can be used to disable Sherkhan Logicar 1. You can hide the key in a bundle with standard wiring.

    Review of car alarm Sherkhan Logicar 1

    The model has the necessary options to protect the car.

    • Reliability.
      As a result of the installation, the consumer does not have to worry about the safety of the vehicle.
    • Low price.
      The cost of an anti-theft agent ranges from 3,800 to 5,000 rubles on average.
    • High build quality. All components of Sherkhan Logicar 1 are made in a durable casing, which prevents them from breaking as a result of falls or other physical impacts.
    • The disadvantages include the fact that, judging by consumer reviews, malfunctions may occur in the operation of the Sherkhan Logicar 1 alarm system. Usually this drawback is due to the fact that during installation the requirements that the car must meet were not met. Installation is carried out as follows:

    • Install the antenna on the inside of the windshield. You can mount the transceiver under glass on the dashboard, but it is advisable that this element be located as high as possible in the cabin. This will ensure efficient reception and transmission of signals. Please note that the quality of the pulses is affected by the presence of metal objects near the antenna. It is advisable that they be located no closer than 4 cm from the device.
    • Install the processor module in the cabin. Choose a location for installation so that the device is inaccessible to a criminal if the car is broken into. It is best to install the device behind the control panel; this place is the most difficult to access, and you will also have to disassemble the center console. Remove the steering wheel and dashboard trim, disconnect the plugs with wires from the device. Determine a free space behind the dashboard and install the unit in it. To eliminate the negative impact of vibrations on the device while driving, the module can be wrapped with foam rubber.
    • The battery turns off. This is required to deactivate the voltage in the on-board network. Otherwise, during installation, you may accidentally short the contacts on one of the devices to ground, which will lead to breakdown. To disconnect voltage from the battery, disconnect the cables with terminals.
    • At the next stage, a siren is installed; it must be placed under the hood. Choose a location that will be least exposed to moisture and high temperatures. Installation of the device near the cylinder block is not allowed; subsequently the siren will melt and will not be able to perform its functions.
    • Install the limit switch to the hood. After installation, route the connection cable to the switch into the car interior.
    • Install the service key. The Valet button must be disguised, since it can be used to disable Sherkhan Logicar 1. You can hide the key in a bundle with standard wiring.
    • The shock sensor is mounted in the passenger compartment. It cannot be placed under the bottom; the controller will quickly fail as a result of exposure to dirt and moisture. Install the sensor in the center of the body, this will allow it to effectively detect impacts on the car from all sides. You can place the device on the partition that separates the engine compartment and the interior.

    Below

    User manual

    Below we will analyze the main nuances from the technical manual for using and setting up Sherkhan Logicar 1.

    Designations of buttons and symbols on the key fob

    The designation of the buttons and indicators of the Sherkhan Logicar 1 key fob is presented below.

    Communicator binding

    1. Turn off the protective mode of Sherkhan Logicar 1. With the ignition off, press the button located on the body of the diode element; the button is pressed for two seconds. The car's lights should blink once.
    2. Then within five seconds you need to click on the button again. The lights will blink twice if no password is used. If there is a code, then the lighting devices will blink once.
    3. If you use a password, then you need to enter its value. The lights in the car will flash twice.
    4. After five seconds, the diode light will light continuously. This suggests that the consumer can register a new remote control. In total, Sherkhan Logicar 1 allows you to link no more than three communicators.
    5. Within five seconds, click on the first key of the communicator. The procedure for binding the remaining remote controls is repeated in the same way.

    Basic faults

    Errors and problems that the user may encounter:

    1. Communicator failure. Failure to operate the pager may be due to low power supplies, so when the first problems appear in transmitting commands, check the battery. If it sits down, it needs to be changed. Open the back cover and replace the power supply, observing the polarity. If the problem is mechanical damage to the communicator or exposure to moisture, you need to disassemble the case and assess the condition of the board. Damaged components such as capacitors and contacts must be replaced and re-soldered, and contact elements must be cleaned in case of oxidation.
    2. Damage to wires. During prolonged use, electrical circuits may be damaged, especially if they were laid in the area of ​​moving parts of the body. Diagnostics will require the help of an electrician. If you have experience and skills, you can use a tester to find damaged wires. Electrical circuits must be replaced regardless of the nature of the damage.
    3. Failure of one of the components. This could be a shock sensor, a processor module, or an antenna adapter. It is necessary to diagnose the contacts on these devices, and clean the oxidized connectors. For more serious problems, detailed diagnostics of the devices will be required. You can fix control unit malfunctions yourself if they are related to the hardware. When water gets on the device, it must be disassembled and dried. But in the case of software failures, it is recommended to entrust troubleshooting to experts, since the unit may need to be reflashed.
    4. False positives. This problem is caused by errors made when adjusting the shock controller. In accordance with the instructions and installation diagram, it is necessary to adjust the sensor. It is necessary to reduce the sensitivity so that the controller is not triggered by passing cars. But the sensitivity threshold cannot be set to a minimum, since this will lead to the fact that Sherkhan Logicar 1 will not detect impacts on the car body at all.

    Video “How to hack Sherkhan alarm system?”

    User LooongJhonson showed in the video that Sherkhan security systems are not as reliable as the manufacturer claims them to be.

    The Sherkhan Logicar 1 alarm system is equipped with a 2-way communication channel with support for remote engine start. To increase security, an original algorithm for encoding control commands was used. The liquid crystal display of the communicator displays the current operating status of the complex; the design of the remote control includes a buzzer and a vibration informant.

    Selecting a Sherkhan signaling system with auto start

    Each Sherkhan alarm system, if it belongs to the Logicar family and is equipped with an autostart connector, can be easily connected to any car, including those equipped with a “START/STOP” button. Perhaps the owner does not require such versatility, and then it is better to pay attention to another family, called Scher khan magicar. The question remains, what is better to buy - Logicar, Magicar or maybe Starline? Having purchased any of these systems, you will not have to perform repairs often. Other features and differences are discussed in the text.

    Specifications

    Technical parameters of the Scher-Khan Logicar 1 car alarm:

    • alarm cycle time - 30 seconds;
    • frequency interval - 433.92 MHz;
    • power of transceiver devices - no higher than 10 mW;
    • current consumption - up to 35 mA;
    • permissible supply voltage is 9-18 V.

    Equipment

    The kit includes:

    • Logicar processor unit;
    • communicator and backup remote control;
    • shock sensor (with cable);
    • status indicator;
    • antenna unit;
    • motor blocking relay and power connector;
    • limit contact switch;
    • siren;
    • set of connecting harnesses;
    • explanatory stickers and documentation for installation and configuration.

    Instructions for Sherkhan Logicar 1

    Instructions for use consist of the following sections:

    1. Purpose of the alarm.
    2. Equipment.
    3. Additional components.
    4. List of functions.
    5. Technical specifications.
    6. Description of the key fob functionality.
    7. The procedure for arming, searching, opening the trunk lid, false alarms.
    8. Emergency siren shutdown.
    9. Modes, channel management.
    10. Starting the power unit from a distance, blocking.
    11. Adjustment and fine tuning of the sensor.
    12. Individual programming of key fobs.

    Conclusion

    The Sherkhan 1 car alarm is identical in technical characteristics to the Scher-Khan Universe 1 model. In general, this is a good budget security system for cars in the mid-price segment.

    The basic set of functions is more than implemented. The connection and fine-tuning scheme is simple, and the operating principle is intuitive. However, be extremely careful, since the work involves voltage, power supply, and electrical equipment.

    How to install

    The installation instructions suggest following the following sequence of actions during installation:

    1. It is prohibited to place the head unit behind the dashboard; install the unit in the engine compartment.
    2. Glue the antenna module onto the tape. The device is located on the glass at a distance of at least 50 mm from metal parts.
    3. Mount the LED indicator with the adjustment button on the lower edge of the glass.
    4. The siren is located in the engine compartment, which ensures increased operating volume. The unit is located at a distance from heated or moving structural elements.
    5. Install the hood and trunk lid position sensors.
    6. Place an impact force detection sensor in the passenger compartment. The device body is placed openly, which allows you to set the first and second sensitivity zones during adjustment.
    7. If an additional sensor is used in the design of the complex, then the element is placed in accordance with the manufacturer’s recommendations.
    8. After installing the Sherkhan alarm, you will lay the patch cables yourself. The cords are laid under decorative linings; it is prohibited to bend the routes at right angles and to press the insulators against sharp edges.

    Connection diagram

    The installer must connect the equipment using standard wiring harnesses. To connect to the central unit, plastic connectors are used, equipped with a rubber seal and a latch. The connection diagram of the 18-pin plug provides for connection to the on-board network, siren and outputs of additional channels. The automatic start unit and the central locking control module are connected separately. The documentation contains an electrical wiring diagram that explains the connection of components and fuses.

    How to use the alarm

    The attached instruction manual consists of sections:

    • description of the kit and technical capabilities;
    • communicator design;
    • how to use the alarm (control of basic and additional functions);
    • recording remote controls into memory and parameter programming algorithms.

    Before using the equipment, you should study the documentation and then become familiar with the design of the remote control. If the control is incorrect, malfunctions and blocking of the motor may occur.

    Designations of buttons and symbols on the key fob

    The instructions included with Logicar 1 contain a description of the communicator. The buttons are designated by Roman numerals, the user operates the keys for a long or short time, and complex button presses are supported. The color display shows the silhouette of the vehicle indicating the protective zones, and additional icons are provided to explain the operating mode, the status of the communication channel and display additional functions.

    Programming table

    A communicator is used to configure operating parameters. The driver operates buttons I and IV or II and IV in a complex manner, ensuring the inclusion of menu sections. Then the IV button is pressed sequentially, the number of impacts corresponds to the function number according to the programming table. The parameter selection is performed by any of the communicator buttons, all steps are confirmed by siren signals and flashing lamps of external lighting equipment.

    NumberFunctionButton IButton IIButton IIIIV button
    1Unlocking the trunk lid with active securityWith protection removedWith security disabling and door unlockingWith security and temporary disabling of the shock sensor and limit switchNot used
    9Engine operating time when warming up5 minutes15 minutes25 minutes45 minutes

    How to set the clock

    The instruction manual has a section on setting the clock:

    1. Enter the setup mode by performing a long complex action on buttons I and III. If the action is correct, the word Pro9 will be activated on the display.
    2. Briefly press the I button to go to the clock settings section; the 4-digit field will flash on the screen.
    3. Set the hours and minutes by pressing keys I and II respectively.
    4. Write the resulting value into memory by pressing buttons II+III for 2 seconds.

    How to enable autorun

    Setting up autostart involves a procedure for reserving the neutral position of the gearbox lever (for manual transmission only). If the algorithm is executed correctly, an icon in the form of a key will appear on the key fob display. The programming method is configured when setting up the head unit (4 methods are supported). If the reservation is erroneous, start-up by pressing button II is impossible; the remote control emits a triple signal and displays the zone that caused the procedure to be prohibited.

    To use automatic start by timer, you need to simultaneously press keys II and IV; the Timer indicator on the display will turn on. The repetition frequency is programmed by configuring the processing unit. To perform a daily start at a given time, it is necessary to program the clock and timing of the starter. If the start after 2,4 or 8 hours is connected, then setting the timer and clock is not required. Starting based on temperature is not provided, since the design does not have a sensor that turns on the starter at a given temperature.

    The driver limits the number of restarts using a programmable function. The mode allows you to perform 5, 7 and 16 starts. It is possible to remove the limit on the number of repetitions. The value of the function is determined based on operating conditions and the wishes of the owner.

    Alarm system Scher-Khan Logicar 1 with auto engine start and shock sensor

    The cords are laid under decorative linings; it is prohibited to bend the routes at right angles and to press the insulators against sharp edges. The installer must connect the equipment using standard wiring harnesses.

    To connect to the central unit, plastic connectors equipped with a rubber seal and a latch are used.

    The connection diagram of the 18-pin plug provides for connection to the on-board network, siren and outputs of additional channels. The automatic start unit and the central locking control module are connected separately.

    The documentation contains an electrical wiring diagram that explains the connection of components and fuses. The attached instruction manual consists of sections:

    1. communicator design;
    2. recording remote controls into memory and parameter programming algorithms.
    3. how to use the alarm (control of basic and additional functions);
    4. description of the kit and technical capabilities;

    Before using the equipment, you should study the documentation and then become familiar with the design of the remote control. If the control is incorrect, malfunctions and blocking of the motor may occur.

    The instructions included with Logicar 1 contain a description of the communicator. The buttons are designated by Roman numerals, the user operates the keys for a long or short time, and complex button presses are supported. The color display shows the silhouette of the vehicle indicating the protective zones, and additional icons are provided to explain the operating mode, the status of the communication channel and display additional functions.

    A communicator is used to configure operating parameters. The driver operates buttons I and IV or II and IV in a complex manner, ensuring the inclusion of menu sections. Then the IV button is pressed sequentially, the number of impacts corresponds to the function number according to the programming table.

    The parameter selection is performed by any of the communicator buttons, all steps are confirmed by siren signals and flashing lamps of external lighting equipment. Number Function Button I Button II Button III Button IV 1 Unlocking the trunk lid when security is active With protection removed With protection turned off and doors unlocked With security and temporary disabling of the shock sensor and limit switch Not used 9 Engine operating time during warm-up 5 minutes 15 minutes 25 minutes 45 minutes The instruction manual contains a section on setting the clock:

    • Write the resulting value into memory by pressing buttons II+III for 2 seconds.
    • Enter the setup mode by performing a long complex action on buttons I and III. If the action is correct, the word Pro9 will be activated on the display.
    • Set the hours and minutes by pressing keys I and II respectively.
    • Briefly press the I button to go to the clock settings section; the 4-digit field will flash on the screen.

    Setting up autostart involves a procedure for reserving the neutral position of the gearbox lever (for manual transmission only).

    Possible faults

    Malfunctions of the Sherhan complex include the failure of the standard remote control. When the battery is low, the information icon on the display turns on; to install a new power source, you need to slide the cover, which is located on the back of the case. When installing a fresh battery, the polarity must be observed. Another source of problems is moisture that gets into electronic components and button mechanisms. The owner needs to disassemble and dry the device; damaged components may need to be replaced.

    During the operation of a car alarm, the insulating layer of the patch cables is destroyed. The faulty area is searched using a test device or visually; to replace it, you need to install wiring of the appropriate cross-section. It is not recommended to use cables made of different materials (due to electrochemical corrosion).

    If the shock sensor is installed and adjusted incorrectly, false alarms will occur. The driver can independently reduce the sensitivity of the warning and alarm zones or move the sensor to a rigid base. It is recommended to restore the components of the security system that are flooded with water in service centers; in case of irreversible damage, the components or the entire complex are replaced.


    Anti-theft systems are constantly being improved, protecting your car from break-ins and theft.

    This is a necessary security measure even for those drivers who leave their cars in garages or paid parking lots; even they do not always save them from theft.

    ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

    Thus, the Scher-Khan company offers several versions of protection systems: MOBICAR, UNIVERSE, MAGICAR, LOGICAR. All of them have the ability to configure auto-start alarms and provide a high level of protection for your car against theft.

    The engine started, but it doesn’t show on the key fob

    If the car was started not from an additional key fob, but from the main one, and incorrect information is displayed on it, then you should look for an error made when installing the alarm system.

    Check that each connector on the main module is connected correctly. If there is no malfunction, contact a specialist.

    PROMOTION: SALE OF NEW CAR 2021 PRODUCTION

    Anti-theft systems are constantly being improved, protecting your car from break-ins and theft.

    This is a necessary security measure even for those drivers who leave their cars in garages or paid parking lots; even they do not always save them from theft.

    ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

    Thus, the Scher-Khan company offers several versions of protection systems: MOBICAR, UNIVERSE, MAGICAR, LOGICAR. All of them have the ability to configure auto-start alarms and provide a high level of protection for your car against theft.

    How to set up a MOBICAR car alarm

    The MOBICAR system implements modern developments in the field of car protection against theft. The package includes a compact control key fob, digital shock sensors, and a small processor unit. It’s not difficult to understand the setup, despite the large number of built-in functions.

    Among the main functions that need to be configured in the MOBICAR car alarm are:

    • car autostart;
    • setting automatic alarm activation;
    • sensitivity adjustment;
    • turning the shock sensor on and off.

    The first thing you should learn is to start and stop the car using the key fob. This is a convenient feature that allows you to warm up your car in winter while you are leaving the house. Or turn off the engine if you stay in the store for a long time, so as not to overheat the vehicle.

    Setting up engine auto start

    You can start the engine remotely from the key fob only in security mode. For a vehicle with a manual transmission, it is necessary to prepare for starting, for this:

    1. With the engine running and the doors closed, as well as the parking brake on and the brake pedal lowered, press button III of the key fob.
    2. If the car has an ignition switch, the key must be removed under the conditions described above. If there is a Start/Stop button, you do not need to press it.
    3. After the completed manipulations, get out of the car and press the security button (short press the I button).

    To autostart Scher-Khan on this alarm model, you must press the following buttons:

    1. Long press on “III”, and an image of smoke will appear on the key fob, which means the engine will start.
    2. The autostart time countdown will begin; to restart it, briefly press the same button.
    3. To turn off the mode, hold III on the key fob until a beep sounds.

    You can set the autostart time manually, and also select the mode to turn off the motor at a given temperature. For this:

    FunctionSequence of button pressesHow will the key fob or car react?
    Go to menu No. 1 to configureWith the engine off.

    hold I+IV

    When setting the warm-up time, you need to take into account the climate mode, and you can also select the functions of morning and evening autostart. With such simple manipulations with the key fob, you can set any car to autostart. Do not forget that with a manual transmission it is necessary to carry out preliminary preparation according to the instructions described above.

    Switching to car control after autostart

    After performing a remote engine start, you should take control of the car into your own hands when you get to it. For this:

    • press the brake pedal;
    • disengage the standing brake;
    • remove the automatic transmission from parking mode.

    In this case, you do not need to press anything on the key fob. After performing one of the listed manipulations, you will hear a sound signal and one blink of the headlights, which indicates that autostart is disabled.

    Possible errors when enabling the autorun function

    If you do not meet the conditions for enabling autorun, the system will generate a number of errors that need to be eliminated. Among all the codes on the key fob there are:

    • ER:01 – the engine is on, you need to turn off the car to continue the settings;
    • 02 – ignition on: turn off and remove the key to continue working with the alarm;
    • 03 – the door is open. When the doors are unlocked, the security mode does not turn on;
    • 04 – hood open;
    • 05 – not set to autostart due to lack of preparation in cars with manual transmission;
    • 06 – standing brake is not engaged;
    • 07 – brake pedal pressed;
    • 08 – the motor does not work, it is worth starting the engine and continuing with the settings;
    • 09 – trunk open;
    • 10 – ignition is set incorrectly;
    • 11 – 19 – there was an alarm.

    If autostart of the car from the key fob does not work, check for these errors, as well as whether the alarm itself is installed correctly. The initial setup and installation should be carried out by a car service specialist in order to avoid disastrous consequences of device failure.

    Important! To correctly and quickly set the autostart time or set up an alarm, carefully read the operating instructions, which describe in detail all the functions of the device.

    Setting up autorun UNIVERSE

    The UNIVERSE car security system is more modern than the previous version. It has voice control and a remote control system via GSM communication. To enable autorun:

    1. With the engine running and the parking brake raised, press and hold the # button.
    2. When the ignition support mode turns on, you should remove the keys from the lock and get out of the car.
    3. Put the car in security mode and press #, holding the button for at least 2 seconds.

    This way you can start the car remotely.

    It is more convenient to make all settings, including setting the engine operating time, through a mobile application, which is very easy to understand. There is also a function to disable autostart of the car.

    Instructions for Mobicar models

    Remote engine start from the Mobicar A, B, 1, 2 alarm remote control is only possible in security mode. For a manual vehicle, carry out the following preparations.

    1. With the engine running, the handbrake raised, and the brake pedal released, press key 3 on the key fob.
    2. Remove the key from the ignition.
    3. Get out of the car and arm it by clicking on button 1.

    The following key combination will enable autorun.

    1. Press button 3 for a while. An image of smoke will appear on the screen, indicating the engine is starting.
    2. The autostart time will countdown. Briefly press 3 and you will stop the timer.
    3. The mode is exited by long pressing key 3.

    MAGICAR model settings

    This car alarm model is characterized by a high level of reliability and ease of control. To avoid errors while setting up the autostart system, do not forget to turn off the engine and turn on the security mode.

    Here are some useful commands executed from the key fob:

    A menu will appear on the key fob display; press IV briefly to set the timer.
    Setting the timer timeSelect hours or minutes by briefly pressing III, with I decreasing the indicator and II increasing it.The selected parameter will be displayed on the screen; to save, briefly press IV.
    Autostart based on temperatureTo disable or enable the function in the time setting menu, hold III. To change the indicators within the range from -30⁰С to 0 ⁰С in steps of 5, briefly press I or II, respectively. To save and proceed to setting the voltage setting, briefly press IV.
    FunctionWhat buttons to press
    Autorun by timerHold II and IV simultaneously for half a second.
    Entering the menu to set program parametersHold I + II or I + IV together for 2 seconds to enter the second menu.
    Remote engine startHold button II for 2 seconds. You can program the time for 5, 15, 25 and 45 minutes.

    Calculate the timing of cranking the starter so that the car has time to warm up before you arrive.

    All Sherkhan alarm systems are highly reliable, so all malfunctions in the settings are most often caused by the inability of car owners to use the security system. Read the operating instructions carefully to avoid any difficulties.

    Rating
    ( 2 ratings, average 4.5 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]