Tuning and flocking the interior of VAZ 2113, 2114, 2115 with your own hands

It's no secret that domestic cars are more affordable and cope better with driving on bad roads. However, the attractive price comes at the cost of sacrificing some functionality, interior comfort, and a simple, no-frills design. All interior decoration can be called unremarkable and gray, and the VAZ 2114 is no exception.

But “traditional craftsmen” have proven more than once that it is possible to completely transform this car without even going to a workshop. If you wish, you can also do the tuning of the VAZ 2114 interior with your own hands, if you take into account the advice given by experts in this field and sensibly assess your own strengths.

Main stages of work

Changing the interior of a car usually includes several main steps, which include:

Dismantling. At this stage, the interior elements should be removed. In this case, it is necessary to show maximum care: some factory elements will be required in subsequent work, the rest can be sold.
Soundproofing. Everyone knows that sound insulation of domestic cars is often almost completely absent. In this regard, when working with a VAZ 2114, interior tuning must necessarily include the isolation stage. Thanks to this, it will become quieter and warmer inside during the cold season.
Modernization of the dashboard. Another big disadvantage of VAZ 2114 cars is the low-quality front panel: the materials used, the hard-to-read instrument panel, the unattractive appearance - all this indicates the need for modernization and replacement of elements.
Upholstery. The easiest part of the job. There is a fairly large selection of seats on the market to suit every taste, ready-made side panels, and upholstery is also easy to choose to suit your needs and desires. It should be noted that you should not change the upholstery of the original seats, since their quality is unlikely to allow you to endure this procedure with dignity and continue to serve. It is better to make a complete replacement with ready-made elements.

The listed stages are the main ones. Now we can look at each in more detail.

On-board computer integration

As standard, VAZ models are equipped with sockets designed for on-board (also called route) computers. With the help of these electronics, the driver will be able to receive data on fuel consumption, electrical parameters, driving mode and other information. It is very important to choose the model of the on-board computer with which the VAZ 2114 will be tuned. The photo below, for example, also demonstrates elements of the diagnostic function of the electronic system.

In such cases, it may additionally be necessary to install special sensors. As a rule, integrating a computer unit does not cause any particular problems; the main thing is to initially select a device that is compatible with the characteristics of the model.

Dismantling the interior

Few people think about the quality of work during dismantling. But this stage can greatly influence further work, so it is advisable to perform it as professionally as possible.

Before you begin the first preparatory stage, it is important to consider the following points:

Estimation of the scope of subsequent work. When completely redoing the interior, the best solution would be to get rid of all the elements, right down to the bare body. This will allow you to prepare the car most thoroughly for subsequent modernization.
Planning dismantling work in stages. Even in an unattractive old salon, some elements can be reused. Therefore, dismantling should be done especially carefully, dividing the entire scope of work into separate stages: removing the trim, dashboard, and so on. A detailed description of the dismantling procedure can be found in the operating manual supplied with the vehicle.
Before you begin any dismantling work, you must disconnect the battery.
When dismantling, it is better to number the parts immediately to avoid subsequent problems during assembly.
Special attention to wiring. Even minor damage can lead to a complete replacement of the electrical system in the car. Connecting sections of wiring are very dangerous, so they must be avoided and a comprehensive replacement must be made in case of breaks.
Bare metal surfaces are cleaned of remaining dirt and degreased.

These are only recommendations, but following them will not be superfluous at all when performing dismantling work on a VAZ 2114 interior tuning with your own hands.

Installing an electric trunk lock

You can also increase the ease of use of the car by installing an electric drive in the luggage compartment. There are often situations when the trunk must be open while the engine is running. For example, when the engine is warming up and, in order not to waste time, the driver decides to load things into the car. Remote control of the lid has long been widespread, and today such tuning of the 2114 with your own hands can be done in three ways:

By replacing the trunk lock with the same one from the “ten”. In this case, it is also necessary to provide it with an electric door lock.
By connecting the electric drive from the door lock to the factory lock.
Use a special electric drive kit designed for installation in the luggage compartment lid.

Depending on the system used, it will be necessary to reconsider the approach to operating keys with alarms and lock control buttons. In general, installing electric drives provides a significant advantage in the form of time savings.

Soundproofing VAZ 2114

The domestic auto industry is most often distinguished by the fact that the interior is quite noisy while driving, and does not retain heat in the cold season. The insulation of the car can hardly be called thoughtful; it is practically absent.

It is important to note that sound insulation should not be partial; this will be of little use. In addition to the interior, you also need to work on the doors, trunk, front panel and engine shield.

Installation work 2114 interior tuning includes the following:

Vizomat MP is applied as the first layer. They cover all surfaces in the trunk, cover the floor, ceiling, and doors. The material involves heating it with a hairdryer and then removing the protective film, after which it is rolled out with a roller. All this work must be done as quickly as possible, so complex shapes are cut out in advance. During the gluing process, it is important to ensure that there are no gaps between the pieces and that there should be no bubbles. The final insulation directly depends on how well this stage is performed.
The next layer is a vibration damper. This material is designed to absorb vibration from the resonance of the wheels and body when driving. It also serves as thermal insulation, which will help retain heat in the cold season, and in hot weather it will prevent warm air from entering inside. It is best when the pieces are used whole. But this is an ideal option, and when doing work alone, this is practically unattainable. If separate pieces are used, the connection is made with an overlap of 20 centimeters. It is also necessary to remember that all kinds of hatches, technological openings, and ventilation grilles remain open; they should be bypassed when gluing. This is necessary to maintain the microclimate, ensure air movement, and prevent the formation of mold. At the same time, the area covered with vibration-absorbing material should be as large as possible.
The third layer of the VAZ 2114 interior tuning is an Accent 15 centimeters thick.
Next, Spleen is glued on, which also performs heat and sound insulation functions.

After the changes made, the interior will become much more comfortable.

Headlight correctors

Currently, many car owners want to tune their headlights, after which the angle of the light beams will change. As a rule, correctors include main cylinders fixed on the instrument panel, as well as working parts installed on their bodies. Such components can be connected using a tube filled with a special liquid that has a low freezing point.

Interior trim

After completing the sound and thermal insulation work, you can begin interior design and design.

To do this, you can go in different ways:

New casing. You can leave the old one, but it is unlikely to satisfy both aesthetically and functionally. The most budget option would be to find suitable panels of better quality from other car brands. You can completely re-cover it with high-quality material by stretching the fabric over the internal panels. It will be difficult to do this on your own, and ordering professional reupholstery is expensive - it all depends on the available budget.
The simplest and relatively affordable way to change the interior almost beyond recognition is to install new seats. Comfortable sports-type seats are available for sale, the mounting of which is compatible with the VAZ 2114. They can be quite expensive, but the result is worth it. It is also possible to replace them with the seats you like from another car, but you need to be prepared for the fact that the fasteners will not fit, to the point that they will need to be completely replaced. In this case, work is carried out before insulation begins.
The front panel is always visible and at hand. Therefore, I especially want it to have a material that is pleasing to the eye and touch, and has smooth, attractive shapes. At the same time, it is necessary to understand that if it is replaced, work with the wiring will be required - it is better to mark the wires in advance and combine them to avoid difficulties during connection.
When replacing the front panel, it makes sense to also make changes to the instrument panel, media system, and sound system of the car. However, this issue should definitely be dealt with by a professional.
Small parts. The gear knob, the center panel keys, the door handles - every little thing can add unique chic to the design.
Backlighting is actively gaining popularity. Inexpensive LED strips, spot lights that imitate the starry sky - everything is limited only by imagination and possibilities.

What is tuning?

Installation of bumper trim for VAZ 2114

The term “tuning” means improving the primary characteristics of a vehicle. VAZ 2114 is an updated version of the classic “nine”. And the model itself is in great demand among fans of the domestic automobile industry, largely thanks to the improvements made to the design of the Samara of the second model. But like any domestic “iron horse,” these machines have many shortcomings. Because of this, most modern motorists are forced to make modifications to the original design of the car. Thanks to them, both the functionality of the vehicle and its comfort are improved.

Designer interior makeover

After modification, or rather complete replacement of sound insulation, work can be carried out to change the interior design. Such work can lead to various costs - it all depends on the final result. There are several ways to change the interior:

Use of new skin. The original material used to finish the car in question, roughly speaking, does not have attractive performance qualities. VAZ 2114 interior tuning with a complete replacement of the headliner, side panels and floor will be quite expensive, but you can try to find better quality panels from other cars. It is quite difficult to stretch the fabric yourself, but it is still possible.
A fairly simple way to modify the interior is to install new seats. Recently, you can find sports seats with lateral support on sale, which will fit the car in question. Their cost is quite high, but the result will be impressive. You can also select seats from other cars, but in this case it may be difficult to fit the mounting. If it is planned to install new seats and create a separate fastening for them, then this work should be carried out before insulating the body.
Nothing catches attention like the front panel of a vehicle: material, shape, central dashboard, installed player. When completely changing the interior of a car, it is practically impossible to do without dismantling the front panel and changing it. However, there are several difficulties here: it is quite difficult to modify an old one, but choosing a new one for your car is also not easy. Work on changing the front panel is also complicated because it involves electrical wiring. In order to avoid difficulties with connecting the wiring during assembly, individual wires should be combined into groups and labeled. Some craftsmen modify the central dashboard, which is often expressed by creating a large seat for a multimedia system. Note that there are quite a lot of similar systems on sale that have a relatively low cost, but at the same time decent functionality. Made in China, the quality is average, but high-quality multimedia systems can cost several hundred.
Another fairly simple way to modify the interior is to modify the instrument panel. I’m not surprised that you still don’t play at the poker house, few people can last here, since few people can withstand so much money, especially suddenly, but that’s the problem, people here, one might say, earn too much pokerdom official org I don’t know why it’s in online poker at pokerdom, but this is where huge money is made, all my friends make money here, and that’s why I won’t even think about other sites and I will also recommend only this one to you, if you play poker then only pokerdom. This change can be made yourself: stick on a new scale, create an original backlight, and so on. The work will not take much time and will not cost much, but the changes will be significant. Some craftsmen install instrument panels from other cars, but here it is quite important to choose the most suitable version.
Small details of the interior, such as the gear shift knob, handles for opening doors, keys on the center panel and many other elements, may also undergo changes. Every little detail can significantly change the interior design if you choose it correctly.
Recently, interior lighting has become very popular. This can be done using special diode strips, which are inexpensive and last quite a long time. The color of the diode strip can be very different; it can be attached to illuminate the central panel, floor and other elements of the car.
Most car owners like to listen to music in the car. In order for it to be of high quality, it is not enough to install a good radio. Particular attention is paid to improving the car's acoustics: new speakers, a subwoofer, and an amplifier are installed. At the same time, the quality of the radio or multimedia system must correspond to the quality of the acoustics, since otherwise the investment will be in vain and there will be no significant changes.

The above information reflects how to carry out interior tuning of a VAZ 2114. Only with an integrated approach can good results be achieved. An example is that without good sound insulation, the installed acoustics will not bring proper pleasure. This is due to the constantly appearing noise. Music lovers prefer to listen to music at medium volume, paying careful attention to sound quality.

In conclusion, we note that a complete transformation of the car interior will take quite a lot of time. In this case, the vehicle will be in a disassembled state, that is, at this moment it cannot be used. To comprehensively change a car, you need to understand many things; electricians usually cause special problems.

Replacement of interior trim

The VAZ 2114 has factory inserts made of fiberboard on the doors, which are covered with a fairly simple fabric. Therefore, it is worth starting with it. To do this, we take measurements and purchase more modern fabric, eco-leather, vinyl leather or genuine leather. This can be a base color that will emphasize the business style of the owner, or a combination of two (the main thing is no more) shades to maintain the sporty style of the car. I think if you are into tuning, then you will definitely have glue and a construction stapler in your garage. After carefully removing the wooden inserts, we use these tools to replace the factory upholstery with our own.

Important: when making a pattern, take into account the presence of parts and holes, with the cut of which many people make mistakes.

Then we create covers for sun visors from the same material: remove the visors, rip apart the polyethylene, take measurements on the new fabric with a margin, cut the pattern and form the cover, and then sew it together with an internal seam. We pull the finished cover onto the visor using a metal ruler, fill the void with foam rubber and sew it tightly.

In order to change the roof sheathing, you need to remove it, tear off the old material, make a pattern for a new one, lay foam rubber between the fiberboard board and the body and secure the upholstery using liquid nails or the same assembly adhesive.

The seat reupholstery is similar. However, it is only necessary if you are keeping the old seats.

Radio tape recorder

You can expand the multimedia capabilities of your car using another electronic system: a radio. Many head units are equipped with a radio receiver and are also capable of reading discs. The most important thing here is to make sure that you have the ability to install sound models. Samara 2 has special niches that allow you to use a factory model or a modern one that can function together with external devices. The connection kits contain all the necessary fasteners, wiring and additional headset. Thus, the installation can be completed in just half an hour.