How to select and replace the cabin filter on a Ford Focus 1

Rules for choosing a cabin filter for Ford Focus 1

There are carbon and regular filters for the car interior. It is impossible to recommend a specific model, since the choice is made depending on the preferences and financial capabilities of the car owner. It is recommended to give preference to filter elements from the following manufacturers:

1. Bosch. This is a worthy replacement for the original cabin filter. The dimensions of the device perfectly match the vehicle. The cabin filter is characterized by stable operation and long service life. The device has three layers, between which an electrostatic charge is created. This ensures high-quality attraction of microparticles. The company's line includes filters developed on the basis of activated carbon, which purify the air and neutralize unpleasant odors.
2. MANN. It belongs to the category of high-quality filters and has an affordable price. Compared to the original, it has less coal. But, the device can effectively eliminate odors in the vehicle interior. In the manufacture of filters, a special pressing technology is used, which ensures an increase in filtering capacity. Combined systems are developed on the basis of activated carbon, which eliminates unpleasant odors.
3. These are carbon and combined filters, the sizes of which are ideal for Ford Focus 1 cars. The model is lightweight. For the production of parts, improved filtration materials are used, which ensures high-quality air purification from contaminants and unpleasant odors. The filters are characterized by the presence of a filter partition, the production of which is made from synthetic material, which increases efficiency.
4. The company produces two types of cabin filters, which allows the car owner to choose the appropriate option for his car. Dust devices ensure the retention of small air pollutants - bacteria, dust, soot, pollen. When using filters, comfort is ensured while driving. The best technical characteristics are typical for combined systems. They not only perform their main function of purifying the air in the cabin, but also neutralize unpleasant odors thanks to the activated carbon used in their production.

These companies produce reliable and durable devices, which ensure high-quality air purification in the cabin and a long service life.

Ford Focus 3 cabin filter: where is it located, replacement - AutoExpert

So, today we are changing the cabin filter. It is not difficult to change, although the location of the filter is not the most convenient.

We will need:

• Carbon cabin filter (don't skimp, the price is not that high) 1709013
• Possibly a screwdriver (I’ll tell you why it’s possible below)
• 15-20 minutes time

I bought an original filter, carbon 1709013 . I don’t see any point in experimenting with analogues for 100-200 rubles.

Let's start replacing:

The filter is located at the passenger's feet, on the left side.

Remove the protective cover that covers the fuse box. To do this, just remove two clips (simply pulling them towards you) and the casing will come off on its own.

The filter is located to the left of the fuse box, behind a closed plug.

The lower part of the plug can be screwed on with a screw, this is where a screwdriver is needed. If you have had it serviced before, then most likely the screw is no longer there. As a rule, no one bothers and screws it back in. In fact, it makes no sense because... The plug holds perfectly even without it on the latches, spontaneous opening is excluded.

Looking ahead, the wires of the fuse box will prevent us from pulling out the filter, so we disconnect the first two connectors (those closest to the filter).

To do this, lift the latches on the connectors all the way and pull them towards you. If you don't reach, then most likely you haven't opened the latch all the way.

Remove the plug and take out the filter.

Now carefully insert the new one. Please note that there are arrows on the filter indicating the direction of air circulation. When installing, the arrows should point inside the cabin. There is foam rubber on two edges of the filter; it should be on the sides. The photo (see above) shows where the foam rubber is located.

• We close the plug and reassemble everything in the reverse order.
• We turn the stove on full blast to blow out any dust that might fall off the filter when changing.
• READY.
• Enjoying clean air.

Smooth roads everyone!!!

Source:

Replacing the cabin filter Ford Focus 3

Among the advantages of the second generation Ford Focus it was difficult to include the simplicity and convenience of replacing the cabin filter. The need to remove the gas pedal assembly to perform routine maintenance seemed excessive to most owners.

Replacing the cabin filter of a Ford Focus 3, fortunately, is easier, although a couple of inconvenient moments remain in the updated car. Another advantage of the third generation ventilation system was that carbon filters, which work much more efficiently, were already installed on the conveyor initially.

But there is also a drawback here: in urban conditions, the carbon sorbent quickly wears off, and the odors of exhaust gases in traffic jams begin to penetrate into the car interior as easily as with a conventional filter.

In such conditions, the standard 15 thousand kilometers of cabin filter life can easily turn into seven or eight.

Choosing a cabin filter for Ford Focus 3

The Ford 1709013 cabin filter is factory installed on the vehicle (and, accordingly, supplied as an original spare part).

This is the case when the original spare part is not so expensive (on average it costs about 700 rubles), and there are no complaints about its quality: it is elastic (accordingly, it can be twisted without fear when inserted into the interior heater box), has a reliable seal around the perimeter .

However, it is not always on sale, so you may have to consider alternatives. One of the most common and popular is TSN 9.7.876, worthy of recommendations:

• Filtron K1350,
• MANN CU25007,
• Fram CFA11642,
• Corteco 80001773.

The Knecht LAK875 can be cited as a curiosity - of course, there are no complaints about the quality of this filter, but it also costs three times more than the original.

Installing new equipment yourself

Filter replacement work is carried out as carefully as possible, which will eliminate the possibility of breaking the fasteners. The replacement of the interior unit is carried out according to plan:

1. Use screwdrivers to carefully unfasten the latches, which are located on the plastic cover. It is located under the edge of the hood near the windshield.
2. The front cover of the filter housing is thrown towards the user by hand. Before removing the cabin filter, it is recommended to remember the features of its location. To avoid mistakes, you need to take a photo.
3. After removing the old filter, a new part is installed. The air flow is predetermined using the Airflow mark. The filter system is installed in the housing so that the air flow direction arrow points down.
4. All work on installing a new part is carried out carefully to avoid damage to its working part. There should be no gaps between the housing and the filter element. If the parts of the cleaner are inserted incorrectly, then you need to change their location.
5. The front cover of the filter system housing is latched by hand. The latches are tight and require some force to close the lid. It is strictly forbidden to leave it open. This leads to a decrease in the efficiency of air purification and contamination of the filter itself.
6. The plastic panel is being installed.
7. At the final stage, the reliability of the installation is checked.

Installing a cabin filter is a simple procedure that you can do yourself.

To ensure proper and complete operation of the filter system, it is recommended to purchase high-quality units and install them in strict accordance with the rules.

Replacing cabin and air filters in Ford Focus 2, 3 inexpensively at the Alian auto repair center in Moscow

Timely replacement of Ford Focus 1 air filters (2, 3) will ensure high-quality operation of important vehicle components, including the power unit, heater and air conditioner. Excessive contamination of the interior component is mainly fraught with the appearance of unpleasant odors and the accumulation of condensation on the glass. Things are worse with the filter element in the engine compartment. Its failure can cause solid particles (sand, dust, dirt, etc.) to enter the intake part of the engine, which leads to a sharp reduction in the life of literally all components of the power unit, including valves, cylinders, piston group and lubrication system.

Replacement in Ford Focus III

Tools

Before replacing directly, prepare:

• new filter;
• Phillips screwdriver;
• rags.

Replacement process

As you remember, this component of the cleaning system in Ford Focus 3 cars is located to the right of the center console (on the passenger seat side).

1. At the passenger's feet, directly on the left side of the console, there is a small hatch - 3 by 3 cm. We remove it first.
2. Having opened the hatch, we see the lining clip, which also needs to be dismantled.

Console clips

In general, such a process will take no more than an hour even for an inexperienced and “crooked” driver. But after replacing it, you will immediately feel that your stove has received a second wind.

Replacement in Ford Focus II

What will you need?

Before you start replacing this component in your car, prepare:

key head to “7”;

Let's start replacing

As mentioned above, the element of the cleaning system in the “second” Focus is located under the dashboard on the driver’s side. In particular, the compartment lid is located at the driver’s feet, near the gas pedal.

1. We take the key to “10” and unscrew the three nuts to remove the gas pedal.
2. Then move the pedal block to the side. Attention! It is not recommended to disconnect the block with wires from the pedal unless absolutely necessary! According to the regulations established by the manufacturer, the working life of this block with wires is limited to ten installation and dismantling operations.
3. Moving the pedal aside, we see three self-tapping screws—they need to be unscrewed using the “7” key.
4. Then remove the compartment cover and dismantle the component itself. It is recommended to remember the direction of the arrow on the element body in advance, since the new filter must be installed in an identical direction.
5. We install a new element - for greater convenience, this can be done by squeezing it like an accordion.
6. At this point, the replacement of the cleaning system component can be considered complete. Now you need to put everything back together in reverse order. Naturally, not forgetting the gas pedal.

Old and new filters for a Ford Focus car

Bottom line – is it worth replacing the cabin filter yourself?

Now you know how to change the cabin filter of a Ford Focus 1. This procedure is simple, it does not require special skills or any special tools. Therefore, you can safely do it yourself. It is important to carry out all work carefully, and to unsnap and snap all plastic fasteners as carefully as possible. If you break one of the case mounts, you will have to buy this expensive part. With a plastic cover things are simpler, but a broken mount will clearly not improve your mood.

This procedure is quite simple, and the service will charge you about 500 rubles for completing it. So you can safely do the work yourself and not worry about not being able to complete the procedure. This is one of the easiest parts of regular Ford Focus 1 maintenance.

Cabin filter, selection, replacement. (R)

It all started when, on the advice of the forum, after TO1 I decided to change the air and cabin filters myself. I'll calm everyone down right away. Even with my not very smooth hands it took a little more than 1 hour

.

The following were pre-ordered from exist.ru:

1 316 192 Gasket 1 $1.83 1 139 654 Cabin filter with activated carbon 1 $21.14 1 106 903 Clamp 2 $5.62

at the Central Bank rate +3%

. However, position 1,316,192 was not available. It was suggested to order in Germany - I refused. Soon, under insurance, I will be replacing the windshield, and then everything will be sealed for me.

a cabin filter from the factory

specifications XS4H 16N619 AB, I don’t know the fin code, but not coal.
The new filter has the specification XS4H 19G244 BA, this is exactly what was installed a month ago on another Focus at U.S. Impex. Structurally, in addition to coal, there are also small differences in the edging and the direction of the filter installation arrow. On the old one, the arrow showed the “up” direction, and on the new one, the direction of air flow, i.e. the arrow should point down. When replacing, I completely removed the entire panel under which the filter is located (I had to tinker ).
However, the clips (1 106 903) did not break and after replacement they snapped into place. When removing this panel, you have to apply a bending force, so the panel was slightly bent, and a small gap of about 10 cm appeared between it and the windshield, not far from the middle of the glass. In other places everything became tight after snapping the clips. By the way, I didn’t find any noticeable traces of sealant; maybe this is a feature of our assembly. Driver's JABO for left-hand drive 1134752 1136384 1085492 1106064 for right-hand drive car: 1134754 1136386 1320540 1085493 1123671

Passenger JABO for left-hand drive: 1136165 1136383 1320538 1085490 1104700 for right-hand drive: 1134753 1136385 1085491 1106065

Gaz 3302-5301245

– gazelle clips for frills.
Available in Exist, Autodoc and other online stores. Gaz 3302-5301244
– Gazelle insert for air intake panel (gas)

Replacement in Ford Focus I

Tools

If you decide to change an element of the air system in a Ford Focus 1 car with your own hands, then prepare in advance:

• flat screwdriver;
• new cabin filter.

Replacement process

So, we change the element of the interior cleaning system with our own hands:

1. First of all, you need to open the hood.
2. Now take a flat-head screwdriver and use it to carefully disconnect the fasteners on the plastic cover. This must be done carefully, since the latches are too fragile (especially if you are replacing in cold weather).

Filter location in Ford Focus 1

• Having disconnected the fastenings, we dismantle the gasket and see the old element of the cleaning system.
• Then we pull the front side of the element body towards us and remove it.
• We take a new component, the arrows on its body indicate the direction of the air flow, and place it so that the arrow points downward.
• You need to check the correct installation - the component must be installed evenly in the case, there should not be large gaps on the sides.
• Close the front wall of the component.

  
  New filter in Ford Focus 1
  Important! When replacing the plastic trim, you need to keep in mind that its rubber seal must fit snugly against the windshield. Otherwise, the filter will regularly get wet in rainy weather, and this, in turn, will lead to malfunctions in the interior ventilation.

Cabin filter Ford Focus 2: replacement without removing the gas pedal

Some motorists consider the cabin filter on the Ford Focus 2 to be useless, citing the already normal air circulation. They don’t think about the fact that gases enter through the windows, since the car is surrounded by clouds of exhaust. And not just gases. Dust from worn pads and clutch clutches, rubber particles, bacteria and microorganisms, all of this penetrates into the interior without hindrance. Replacing the cabin filter on a Ford Focus 2 is a necessary operation, since the comfort and microclimate in the cabin depends on it.

The more often the better. According to operating conditions, the cabin filter should be changed after the 20,000th distance traveled. With frequent trips on dusty roads, the mileage of the part can be reduced by one and a half or two times. Regardless of mileage, there are other signs that indicate when the filter needs to be changed. This:

• weak air flow in the cabin;
• a technical smell appears inside the car when air enters;
• when the fan is turned on, a large amount of dust appears;
• excessive fogging of glass.

Old clogged cabin filter

When you have to change the cabin filter, the new part should already be available. You can find it for replacement at car markets, car dealerships and specialized online resources.

Mann filter element design

For installation on a Ford Focus 2, it is better to buy one of these filters:

1. Bosch, catalog number 1987432413, “Standard” filter, endowed with a fibrous structure. The cleaning percentage is close to ideal - 98%, while bacteria, soot, dust and dirt are retained. The second type of parts contains activated carbon, which additionally neutralizes odors and fumes. Price equivalent from 9 dollars “Standard” and 12 USD – combined.
2. Mann-Filter, code CUK2440, is capable of retaining up to 95% of dust and other contaminants, thanks to a special pleating technology. The charcoal located in the material acts as a catcher. The cost of the part is from 15 dollars.
3. Denso, article DCF348K, offer 2 types of cabin filters - dust and combined, equally capable of trapping the smallest particles of pollution along with bacteria and soot. The second type neutralizes unpleasant “odors” and provides a 25% higher degree of purification due to the presence of activated carbon. Price range from 10 to 15 dollars.
4. TSN, code 9710, from the Russian one, shows good cleaning. The declared figures of 98% are achieved through repeated testing and a special dispersed filler. Cost from 3 dollars.
5. Filtron, number K1150A, provides high purification of air masses using a filter membrane and fibers with an electrostatic charge, due to which small particles of contaminants adhere to the material. Starting price from $13.

Interesting on the topic: Pages of history. Toyota Supra turns

It is best to choose the original Ford Focus 2 cabin filter, its number is 1354953. But like any “original” part, the price is high and starts from $28.

Experienced motorists offer several replacement options. Replacing the filter without removing the gas pedal seems impossible for most car owners. Although there is nothing supernatural about this and the procedure itself can be performed independently.