In the modern world, automotive LED lamps are widely used as lighting sources for cars. A huge number of lighting designs are offered to buyers on the market. But how to choose the right one for a particular car? To make it easier to make a choice in favor of one or another LED lamp, you need to get an idea of the main characteristics and features of such auto lamps, as well as compare the diodes with their predecessors.
LEDs, halogens and xenon lamps
More and more drivers are choosing LED car lamps. Yes, this is not surprising, because the advantages of diodes over others are obvious. But to be confident in your choice, you need to have a clear idea of the specific advantages and disadvantages of these light sources compared to others.
For comparison, consider LEDs, classic halogens and xenon. For convenience, the characteristics of the main parameters are summarized in a small table.
The table clearly shows that ice bulbs have significant advantages over others. Firstly, the power consumption is several times lower, secondly, the service life is far ahead of competitors and, thirdly, the glow is closest to daylight.
Comparison with Philips
Compare with the original Philips H11
The difference from the diode headlight lamps produced by Philips Ultinon is the improved heat dissipation. The number and model of LEDs are the same. Any most effective heat removal system will work poorly if it is not assembled well. Therefore, in the next review we will analyze the samples and examine them for defects. If detected, you can eliminate it with a needle file and thermal paste. In my experience, more than 50% of LED lamps for the home require modifications; even LED spotlights have to be rebuilt.
In reflector optics designed for focusing for a filament, the location of the simulated filament plays an important role. The most advanced technologies that undergo certification are based on imitation.
Advantages of diodes and their disadvantages
LED lamps are endowed with a large number of advantages that need to be considered in more detail. It’s also important to pay attention to the disadvantages of ice light sources, because without them you can’t do anything.
Advantages of LEDs
So, speaking about the advantages of LEDs, it is worth mentioning the following points:
- lamps with LEDs are characterized by a low level of heating, and this fact can guarantee their excellent operation even in conditions where humidity is high, for example, during a rainstorm, you don’t have to worry that they will suddenly burst;
- LEDs enhance distance visibility as they produce a lot of light;
- the body of such lamps is made of durable, moisture-proof material that is resistant to minor damage and various vibrations;
- headlights equipped with ice lamps improve the performance of brake lights on a car due to the fact that the working glow will occur faster than with other lighting sources. Thus, you can speed up the reaction of your vehicle and even avoid an accident;
- ice bulbs for cars are able to illuminate the space in front of the car to the maximum, as they contain dozens of small light sources;
- LED headlights always have an interesting design, which makes the car stand out from the crowd.
Disadvantages of LEDs
Regarding the negative side of ice lamps, it is worth noting the following points:
- Such light sources are maintenance-free, that is, at the end of their service life, if they burn out, the headlamp assembly will need to be replaced. But this fact is counterbalanced by a decent service life;
- ice bulbs have a higher price;
- such light sources will not heat the glass of the headlight itself and therefore ice will form in frosty weather. In this case, you will need to scrape the ice off more often, but there are special headlight cleaners for this case;
- Over time they may fade a little, but this happens very slowly and completely unnoticed;
- diode lamps in headlights will not be suitable for reflectors instead of halogen, since such a reflector will not be able to provide the necessary focusing for the flow of light from ice bulbs. This fact will reduce the illumination of the road, and an incorrectly set angle of light can blind the oncoming driver.
Despite these disadvantages, installing LED lamps in headlights can be a good solution for a budget-conscious car enthusiast. After all, high-quality lamps with diodes will last many times longer than other sources of light radiation without maintenance or replacement.
Legal points
Many experienced drivers have a completely logical question: is it always possible to install ice lamps on a car? In order to have a complete understanding of the operation of such headlights, it would be appropriate to mention the fact that not all cars can legally install LED light sources.
Installing a lamp with diodes on a car is permitted by law in the following cases:
- if a specific car model comes with such lamps in its original form from the factory;
- if the car was produced with halogen lighting, but its functionality allows you to install LED lighting elements. In this case, you can reinstall the lamps yourself, the main thing is that the car model, its class, power and reflector type allow installation.
If you want to install diodes in the headlights and avoid legal punishment in the form of a fine, but you do not comply with these two points, then after installation a safety check is required. After such a check and after receiving a certificate of safety compliance in connection with changes in the design, you will need to re-register the car with the traffic police.
Popular vote
What LED lamps would you choose or recommend?
NIGHTEYE H4
13.33 % ( 4 )
HLXG S1/N1 LED HEADLIGHT
20.00 % ( 6 )
INFITARY H4
3.33 % ( 1 )
TUOYIKE H4/F2
10.00 % ( 3 )
CNSUNNYLIGHT H4
0.00 % ( 0 )
HLXG H7
20.00 % ( 6 )
NOVSIGHT H7 LED
6.67 % ( 2 )
BRAVEWAY LED H7
16.67 % ( 5 )
MAXGTRS H7
3.33 % ( 1 )
Main characteristics of ice lamps
When planning to purchase ice lamps for headlights for your car, it would be advisable to familiarize yourself with the main characteristics that are worth paying attention to. Once you understand the parameters of LED lighting sources, you can choose the best option.
Let's look at the main technical characteristics of LED lamps.
Voltage . Car LED lamps can be 12 or 24 W. For passenger cars, choose a voltage of 12 W, and for trucks - 24 W.
A driver is installed in the optics of LED lamps, designed to stabilize the current in the event of voltage surges. Thanks to this, diodes today are excellent for long-term service.
Luminous flux and power determine the brightness of the lamp, so you need to pay special attention to them. Accordingly, the brighter you want the light, the more powerful the lamp should be.
You can trace the relationship between power and luminous flux using the table (for comparison, a column with the power of conventional incandescent lamps has been added).
The table clearly shows that LED lamps consume several times less energy, which determines their popularity.
Colorful temperature . It defines the color spectrum and is measured in degrees Kelvin. Depending on the indicator, you can determine how warm or cold the light will be.
This is interesting: Reviews from Uber drivers
The table shows the correspondence between the indicator and the shade of light.
The higher the color temperature, the cooler the color of the light.
Scattering angle . When choosing lamps, you need to pay attention to the location of the LEDs themselves, because by themselves they are able to shine in front of themselves and, therefore, very little light will deviate to the side. So, the location of the diodes determines the dispersion angle, which falls within the range from 30 to 360 degrees.
Ripple of light . This characteristic is also important. In principle, a high-quality lamp will never pulsate; it is better to choose lamps with the lowest indicators. The most optimal range is from 5 to 15%.
Life time . When choosing diode lamps, you must understand that their service life is calculated not in calendar days, but in hours. Priority should be given to lamps with a service life of up to 50,000 hours. The lower limit of service life is 10,000 hours.
Each manufacturer provides a guarantee for diode lamps. If the lamp has not completed its warranty period, it will be replaced.
Working temperature . It is important to understand the scope of application of the lamp when purchasing. In general, the operating temperature ranges from -40 to + 40 degrees, but manufacturers can make their own adjustments to the limits.
Base . Regarding diode lamps for car headlights, the base is not intended to provide a seal, but to serve to secure and transmit electricity directly to the lighting mechanism itself. The type of base will determine where the lamps can be used in the car. For example, the most common sockets for headlights are marked H4 and H7. Fog lights are most often equipped with lamps with sockets H8, H10, H11. But W5W, T10, T4W are suitable for direction indicators and dimensions. Whereas the main turn signals can be equipped with lamps with a P21W socket. Reversing lights can have lamps with W21W, T20, 7440 sockets.
The figure below shows different types of sockets indicating their places of application in the car.
Best standard h7 halogen bulbs
Among standard h7 type halogen car lamps, three models are highly rated and universally popular - Philips Vision, Mtf-Light Standart and Osram Original Line. Let us consider in detail their main features and characteristics.
1 Philips Vision h7
The Philips Vision h7 light bulb has a quartz glass bulb with UV filtering. Thanks to this, it is able to withstand large overloads of pressure and temperature. Even if water gets on its hot surface, it will not burst! Despite the fact that it belongs to the standard modification, it shines 30% brighter than its regular counterpart.
Photo from ozon.ru
Specifications:
- Temperature – 3200K.
- Power – 55 W.
- Base - PX26d.
- Voltage – 12 V.
2 Mtf-Light Standard h7
Another Korean model of the h7 lamp with the ability to absorb ultraviolet radiation and produce 30% more brightness than the standard modification. With a power of 55 W and a power supply of 12 V, the color temperature of the glow reaches 2900K. Thanks to the improved filament design, its average working life is at least 800 hours.
3 Osram Original Line h7
Halogen lamp from the German manufacturer Osram Original Line h7 with a standard 55-watt power and a color temperature of 3200K. The luminous flux reaches 1.5 thousand lumens. The universal base PX26d allows it to be installed on all types of cars. Thanks to the reinforced metal base and increased vibration resistance, its lifespan exceeds 500 hours.
Photo from rozetka.ua
Types of diode lamps for cars
LED matrices are extremely popular today, since they help to significantly reduce the cost of the finished structure. And the cost is reduced due to the fact that several diodes are combined into one crystal. Thus, production becomes cheaper and at the same time the quality and characteristics of the finished lamp increase.
The type of design of ice lamps is determined by the use of a certain type of matrix, it may be.
- Regular matrix. It contains exclusively the usual blue diodes. And the lens is coated with phosphor - a special substance that converts the original blue color into the desired shades of white and yellow.
- RGB matrix. It already houses different types of diodes, namely red, green and blue. It is precisely each letter of the abbreviation that implies an abbreviation for the color of the LEDs in English: Red, Green and, accordingly, Blue. The bottom line is that mixing colors determines the tone of white or yellow in the output. But the shades of the resulting white are regulated by decreasing or increasing the intensity of the glow of a particular color in the matrix. In this case, it is possible to obtain a wider spectrum of white, but less energy efficiency is observed. With aging, the color may become somewhat distorted, since the wear of different colors of diodes will occur unevenly.
But the diodes themselves can be manufactured using technologies such as:
- SMD - this technology is the most popular at present; it means that the diodes are fixed to the surface of the lamp. It is easy to install and has low energy consumption. In this category, special attention should be paid to powerful LEDs, which, when consuming 10 W or more, have a very bright glow and do not require additional diffuse lenses;
- COB - using this technology, diodes are installed on the board itself. Thus, the volume is reduced, greater uniformity of the luminous flux is ensured and cooling is improved.
Let's sum it up
Taking into account the above information, it becomes clear that when replacing halogen lamps with LED lamps, you can quite count on a noticeable improvement in the quality of road lighting.
It is also noted that high-quality LED lamps can shine better, brighter and clearer than xenon lamps (especially if the xenon in the headlights is cheap and the optics themselves are not lensed for xenon).
We also recommend reading the article on how to change the low beam bulb in a Renault Logan. From this article you will learn about the features, subtleties and nuances that need to be taken into account when replacing low beam lamps on a car of this model.
However, it is important that the headlights are adjusted correctly and that the LED bulbs themselves are correctly selected and installed. Often such lamps require additional active cooling. On the one hand, this complicates installation, although on the other hand, the service life of LED lamps increases noticeably.
Finally, we note that before you buy LED car lamps, you must separately take into account their advantages and disadvantages, discussed above. One way or another, the appearance of LED lamps on the market significantly expands the choice options for car enthusiasts, taking into account the specific goals, objectives and characteristics of vehicle operation.
Tips for choosing ice lamps
The choice of one or another LED car lamp is primarily determined by the final purpose of the purchase. There are car enthusiasts who simply want to give their car an aesthetic appearance and decorate it. But many drivers still prefer LEDs in order to save battery energy and increase the service life of the car’s lighting elements. Thus, based on the characteristics of the diodes and the purpose of the lamps, you can begin to make a choice.
Low beam lamps
For low beam lamps, optics with base H7 markings are often used. To obtain the desired direction, the light must be reflected along a special surface of the headlight itself, so the LED must be located at the top.
When choosing low beam diodes, be guided by the fact that the power should be from 12 Watts, and the brightness of light radiation should be from 1000 lm. In principle, you can use the minimum permissible level, but only if you have high-quality diodes.
Another important point is the presence of a cooling radiator. It may be absent, but only if the lamp does not need cooling based on the manufacturer’s characteristics due to its small size.
Some ice lamps may not be suitable for your vehicle, so the choice should be made in accordance with the car model. It may happen that the diode lamp does not fit the car's socket, or the optics of the design of the light source may not match the reflector.
High beam lamps
As for the starting characteristics for high beam lamps, it is better to stick to the choice of power, starting from 17 watts with a brightness of 1500 lm. A cooling system is required. The selection of all elements must be carried out taking into account the dimensions of the vehicle headlight. The standard socket for high beam lamps is H1.
A diode with an H4 base type is quite suitable for organizing high and low beams. Structurally, such lamps are equipped with both high and low beams. When choosing from several lamp options, it is better to give preference to designs with smaller dimensions, since in principle the elements are designed for halogen lamps.
This is interesting: Subaru Forester 2012 (Subaru Forester 2012)
Signal lamps and dimensions
For brake lights and parking lights, a power of 1 to 2 W with a brightness ranging from 50 to 100 Lm will be sufficient. In this case, more power is not needed, since it will only waste the vehicle's lamp resources. The W5W socket is a good fit for front brake lights. For the rear, P21 is widely used.
On the modern market you can find a lot of options for lights for dimensions, which will have from 3 to 27 LEDs. However, just three diodes are not enough, the glow will be dim. In this case, it’s better to pay extra for more chips, it’s worth it.
Fog lamps
Such lamps are very important, as they provide safer movement in conditions of fog or heavy rain or snow by increasing the visibility of the car. Anti-fog LEDs have low requirements, but must still have a power of at least 10 watts and a brightness of 900 lumens. H8 and H11 sockets are widely used.
Diodes in the salon
Ice bulbs for car interiors are often used as decoration. In this case, it is important to remember that low-quality ice lamps can have a negative impact on your eyes, so you should not trust unverified manufacturers or counterfeits. Drivers often highlight the doors and sills inside the cabin with LED lighting. They do this not only for the purpose of tuning, but also to indicate open doors in the dark for other road users. The characteristics of interior lamps can be chosen at your discretion.
Best All-Weather H4 Bulbs
If you often drive in bad weather, rain, or fog, then you should equip your car’s headlights with all-weather auto lamps. They create a yellowish light that is less reflected in water droplets and does not scatter like white light. Therefore, in bad weather, visibility improves due to the contrast of lighting. The best models of all-weather H4 lamps are presented below.
Mtf-Light Aurum H4
Photo: avtogsm.ru
Approximate cost:
920 rubles.
Pros:
- bright lemon yellow color;
- dispel fog;
- good lighting in the rain.
Consumer opinion:
“I live in a region with frequent rain and fog. There were ordinary lamps providing white light, and in rain and fog a light curtain was created. I installed all-weather boots from MTF-Light and it became much more comfortable.”
Osram Fog Breaker H4
Photo: i.ebayimg.com
Approximate cost:
800 rubles.
Pros:
- 2600K;
- golden yellow color;
- quartz glass
- ideal for bad weather.
Consumer rating:
“I didn’t expect such an effect. Often in rain or fog I rode in a shroud. I installed Osram all-weather lamps, and now the contrasting yellow lighting creates good visibility in the fog.”
Narva H4 Contrast+
Photo: aa.d-cd.net
Approximate cost:
500 rubles.
Pros:
- increases contrast and sharpness;
- a special filter that filters out blue light.
Consumer Opinion:
“The best H4 bulbs in inclement weather.
From now on, the difficulties associated with poor visibility in bad weather are forgotten and left in the past.”
Popular LED manufacturers
Many manufacturers are already producing LED lamps for headlights, but it is better to opt for time-tested ones. You shouldn’t save money and buy cheap fakes; it’s better to buy a high-quality lamp from a reputable manufacturer that guarantees both a bright glow and a long service life.
Among the popular manufacturers of ice lamps for headlights, the following are clearly in the lead:
- NIGHTEYE company . One of its latest products is H4 LED lamps for NIGHTEYE H4 headlights. The price in this case is justified by the quality one hundred percent. The kit initially comes with two light bulbs, each with a brightness of 4000 lumens. And the use of lighting sources is possible on headlights of any configuration. Also a huge plus is the nominal operating time, which is equal to 100,000 hours. In fact, it was not possible to achieve this mark, but in practice the performance indicators are close to nominal.
- hlxg company . Users respond positively to the entire line of diode car headlights. The most common LED lamp from this company is H4 50 W. The fact is that the design of the lamp itself matches a huge number of car headlights and installation is quite simple. But you need to take into account that you should not install these ice bulbs on headlights with lensless deflectors, since the illumination level will not be able to achieve the effect of 6000 K. But with lenses, the effect will be completely opposite - on the most unlit track with these diodes, any driver will feel confident. Rated for 30,000 hours.
- DXZ also managed to establish itself on the positive side. For example, a set of DXZ BrightLux H4 ice lamps is distinguished by decent brightness: with a power of 45 Watts, the real brightness reaches 6000 Lumens and the color temperature reaches 6500 K. The lamp body is made of aircraft aluminum, which can provide maximum protection from moisture and dust. Service life is rated for 50,000 hours.
- Auxmart has long been a favorite of many drivers . For example, Auxmart H7 headlight lamps are designed to solve all problems with poor road lighting. Each element is capable of producing 4000 lm and has good focusing on the road surface. When switching from high beam to near beam, the directional beam is perfectly scattered and collected, and the boundaries are clearly distinguished. And according to many drivers, the quality of the headlights does not affect the brightness of the lamps. But in the case of these headlights, special attention must be paid to brightness due to the fact that the color temperature of 6500 K can blind drivers, which often requires additional adjustment.
- ZDATT company . Particular attention should be paid to the ZDATT H7 COB headlight kit. In this case, a great advantage is given to increasing operating temperatures. The lower limit remained -40, but the upper limit was increased from 80 to 150 degrees. This fact allows us to state with absolute certainty that overheating is not possible when the cooling fans are running. The power of the set is 80 watts, with each lamp producing 4000 lm with a temperature of 6000 K. Designed for 30,000 hours.
Design of LED lamps
They are also called LED lamps (from the English “light-emitting diode” - “light-emitting diode”). This lighting source does not contain gases, unlike halogen ones. The design itself is quite simple - the light is produced by a single crystal, which is mounted in a small reflective bowl, and to which power contacts, wire connections, a radiator and a distribution lens are connected. The body of the LED lamp is mainly made of plastic.
An LED lamp is always equipped with a matrix of one of 4 types:
- Regular blue LEDs;
- Diodes according to the RGB standard (red, green, blue - red, blue, green);
- Diodes that are attached to the surface of the light bulb (SMD);
- Diodes that are fixed on the board (COB).
According to the base used in the design (in other words, by type), diode lamps can be marked with various Latin letters and numbers, for example, H11 or W5W. The exact gradation is presented in the ECE (Economic Commission for Europe) - “Document on Consumer Safety of the Economic Commission for Europe”.
Main differences from halogen light sources
The design of the halogen source consists of a tungsten filament, which is enclosed in a sealed glass bulb filled with an inert gas and halogen. Due to the gas, the brightness of the glow increases, so it allows you to increase the heating temperature of the filament. However, the resource of such devices is not durable - only 5,000 hours, while the LED lamp has about 30,000 hours. Moreover, “halogen” lamps have a high heating temperature - approximately 150 degrees Celsius and are absolutely not tolerant of surge voltage. LED sources are much more tolerant in this regard.
Main differences from xenon light sources
With xenon it is still much worse: to light up at full power such a lamp will take up to 3 seconds, and the LED will light up within 0.1 second. The brightness of the xenon lights is also low - approximately 70 MegaCandelas (candles) per 1 square meter. For diodes, this indicator starts from 100 units. There’s nothing to even mention about the service life of xenon – only 3,000 hours.
Advantages of LED lamps
- Reduced energy consumption - compared to halogen or xenon, it is several times lower. Standard consumption of up to 30 W allows you to save fuel. Of course, it cannot be called very noticeable - for every 100 km approximately 0.2 liters of gasoline will be saved. However, with reduced consumption, the load on the battery and, in general, on the entire power system of the machine is reduced.
- Increased light flow - the light temperature of modern diodes varies between 6 thousand - 6.5 thousand Kelvin, which corresponds to a bright sunny day. Imitating natural daylight, rather than bright artificial light, makes driving at night easier. With such light, the eyes become less tired and the road surface is better illuminated.
- Legality of installation - some LEDs can be installed independently at will; such an operation is not prohibited by law (at one time the legality of installing xenon and halogen lamps was in question). Installation is possible on brake lights, turn signals, and working lights in the interior. It is also possible to install head lighting (H7 and H4) without special permits, but only if the car will be operated outside the public road network.
- Extended service life - subject to proper use of LED lamps, they can last up to 10 years.
- Low susceptibility to shocks and vibrations - due to the fact that the design of the diodes does not contain fragile filaments and a glass case, then, in fact, there is nothing there to break when impacted. The thin wires themselves and the semiconductor element are securely fastened and protected by a plastic lens. Keeping in mind the rough Russian roads, this factor will be important.
- Speed of operation - LED lamps turn on to full power 200 milliseconds faster than classic lamps. Thus, installing them in brake lights will allow the car driving behind to react more quickly to the stop of the one in front.
Disadvantages of LED lamps
Their main disadvantage is that during operation they emit a considerable amount of heat in the direction opposite to the flow of light. Thus, their effective service life will directly depend on the quality of the heat removal system. If the heat is not completely removed, this will shorten the life of the lamp by an order of magnitude.
In addition, LED lamps are much more expensive than traditional lamps and are often sold in sets (it is not always possible to find one copy on sale). The price may exceed the cost of conventional ones by 50-60 times, however, this circumstance is more than compensated by the extremely long service life.
LEDs require a rated current to operate, so resistors or additional power sources will have to be used in the vehicle's power system.
Why do many people prefer LEDs?
LEDs for car headlights have become widespread because they have low power consumption and, along with this, a powerful luminous flux. Perhaps these two factors are fundamental when choosing light sources for a vehicle. After all, what driver doesn’t dream of saving battery energy and at the same time getting high-quality lighting.
Lamps with diodes are capable of maximally illuminating the road in front of the car, since they contain many small emitters. Plus, the color temperature allows you to get comfortable shades of white, as close as possible to natural tones. This fact will help not only improve the quality of lighting, but also improve the visibility of the vehicle for other road users.
Ice lamps for headlights also have disadvantages, but the advantages still successfully cover them. Even if the diodes are not maintained and require complete replacement, this can be solved due to their impressive service life. Even if they have a high cost, it pays off again in terms of work duration and quality.
It is important to remember when choosing lighting sources that they must be provided for by the standard design of the car. Otherwise, the driver will be issued a fine, since this action is considered an administrative offense. If the installation of ice lamps in the design of the car requires changes, then after making them the vehicle must undergo a safety test and receive a certificate.
power unit
It is stated that the driver stabilizes the current in a fairly large range, from 9 to 32V. My power supply with a USB port now produces a maximum of 18 volts and this is enough to check stability.
Characteristics of H7 diode light sources
What characteristics should LED lighting sources have:
- Brightness. This value for optimal lighting should be at least 1100 lumens.
- If we are talking about low beam, then the brightness parameter in this case should be at least 1 thousand lumens.
- Another parameter is power. The power value for the on-board network of a passenger car should be about 14 volts.
- It is also important that the light bulbs purchased are equipped with a radiator to cool the device. Although the lamps themselves practically do not heat up during operation, it is desirable that the products have a well-thought-out cooling system.
Base H8
Optima Light LED i-ZOOM
The operating voltage allows it to be used in cars and trucks, motorcycles and special equipment. The power is 19 W, the brightness is 3800 lm, and the color temperature is 5100 K. Its design has the following feature - the LED chips are built in so that the filament of a halogen lamp is imitated, therefore, an ideal cut-off line is obtained.
Optima Light LED i-ZOO
Advantages:
- Compact radiator;
- High quality.
Flaws:
- Not identified
The average cost is 2400 rubles.
LEDO X-Treme
Its luminous flux is 4000 lm, and the color temperature is 5700 K. Power is 20 W. It is universal, anti-fog, suitable for low and high beam. It has a Philips Luxeon chip installed. The lamp has a built-in current stabilizer and a compact aluminum body.
LEDO X-Treme
Advantages:
- The warranty reaches two years;
- Long service life, up to 12 years;
- Easy installation.
Flaws:
- Not identified.
The average cost is 2400 rubles.
HiVision Z2 Premium
Its characteristics are as follows:
- Color temperature – 4000 or 6000 K;
- Luminous flux – 4000 Lm;
- Power – 25 W.
It operates at temperatures from minus 40 to plus 80. Suitable for car enthusiasts of the premium auto lighting brand.
HiVision Z2 Premium
Advantages:
- High class of shell protection;
- Long service life;
- 1.5 year warranty.
Flaws:
- Not identified.
The average cost is 6,000 rubles.
Base H7
Philips X-tremeUltinon LED 12985BWX2
A convenient 25 W device for passenger cars. It emits near and far cold white light. Luminous flux is 1760 lm, and color temperature is 6500K.
Philips X-tremeUltinon LED 12985BWX2
Advantages:
- Reliability;
- Well-known manufacturer.
Flaws:
- Not found.
The average price is 8600 rubles.
SVS 0240473000
The company with such a laconic name is a Russian brand. It produces a wide range of vehicle lighting products. SVS products are of good quality, modern technological solutions and are suitable for use in any climatic conditions, from the tundra to the subtropics.
The power is 50 W, it is suitable for high and low beams of passenger cars. The color temperature is 5000 K and the luminous flux is 6000 lm.
SVS 0240473000
Advantages:
- Excellent characteristics;
- Value for money;
- Russian brand.
Flaws:
- Not found.
Sold at a price of 3,000 rubles.
Osram LEDriving HL 65210CW
A German company headquartered in Munich, which has existed since 1919 and is one of the best manufacturers of lighting equipment, including car lamps. The color temperature is 6000 K and the power is 14 W. It is suitable for high and low beam.
Osram LEDriving HL 65210CW
Advantages:
- High quality;
- Good technical performance.
Flaws:
- The price is more expensive than competitors.
Sold at a price of 10,000 rubles.
