Order a service At its core, restorative polishing of a car is one of the ways to restore the paintwork of the body, giving the car an attractive appearance. The main task that a master using this technology sets for himself is to eliminate those defects that are completely inevitable when driving on the roads of big cities or small villages.
Benefits of restorative polishing
Abrasive polishing in Moscow is a procedure that has already won an army of fans. Using the paste, you can completely restore paintwork and achieve impressive results:
- The car looks like new again.
- The whole procedure does not take much time.
- The cost of polishing is quite prohibitive for most car owners.
Today, abrasive polishing of the body is included in the plan of many car owners, and the class of the car in this case does not matter.
Abrasive polishing
Stages Results Prices Consultation
Restorative body polishing (or as it is often called abrasive polishing) is one of the components of professional cosmetic maintenance of vehicles, providing it with an impeccable appearance.
Active use of a car is associated with constant negative environmental impact. Precipitation, dirt, dust, soot from combustion products, traces of plant sap spoil the appearance and destroy the paintwork of the car body. Even more damage is caused to paintwork by low-quality car wash complexes, which, unfortunately, are the majority in Russia. Their use of aggressive alkaline compounds (at the first stage of contactless washing) leads to the destruction of the varnish on the body, and mechanical wiping (the final stage of “non-contact”), to put it mildly, with “not the first fresh rags” acts on the paintwork like sandpaper. After such a wash, the body of your car will definitely need polishing of scratches, which should only be performed at a professional detailing center. Here you will not only be carefully abrasively polished, preserving the paint layer as much as possible, but will also protect the body from “dangerous” car washes with the help of protective coatings.
Abrasive polishing of a car body in “Advance Star”
Abrasive polishing of a car is a labor-intensive procedure and consists of 4 stages.
- Stage 1. Preparation for polishing. To see in detail how deeply the paintwork is damaged, the car is washed properly. (Only TWO-PHASE washing technology can be correct). Next, with the help of professional lighting devices, the condition of the paintwork of the body is studied, and parts made of unpainted plastic are masked. Using a car scrub, the oxidized layer of paintwork, foreign inclusions, sticking of various types - bitumen, road markings, tree resin and other contaminants are removed from the body.
- Stage 2. Abrasive polishing or restoration. Polishing scratches on a car, as well as removing from the paintwork all kinds of scratches, clouding, oxidation and destruction of the varnish, including those resulting from ultraviolet solar exposure, bird droppings, and mechanical impact. Abrasive polishing is performed using professional equipment and tools, polishing pastes and polishing wheels. All the tools and materials used are of the highest quality, manufactured in America and Europe, and have proven themselves in the world market as the most effective and safe. Their use helps to achieve a perfect polishing result without significantly reducing the thickness of the varnish.
- Stage 3. Anti-hologram polishing. This stage is one of the most important. It is during this process that the coating is brought to a mirror state, microscratches (holograms) 1-3 microns thick, which remain after polishing with a coarser polishing paste and circles, are eliminated. At the anti-hologram polishing stage, the varnish acquires maximum shine.
- Stage 4. Protective polishing. The polished surface of the body is very vulnerable and can easily lose its sparkling appearance due to any mechanical, chemical and ultraviolet influence. To preserve the recreated shine and beauty, it is recommended to complete the abrasive polishing process by treating the paintwork with a protective coating.
Abrasive polishing allows you to achieve excellent results:
— removal of the oxidized and destroyed top layer of varnish;
— elimination of minor marks and scratches;
- return of richness of color and shine.
Abrasive polishing price
The abrasive polishing process takes from a couple of hours to several days (depending on the condition of the car). High-quality and safe body polishing is a real art that takes many years to learn. After all, the thickness of the varnish on modern cars is thinner than a human hair, and removing it entirely is as easy as shelling pears. That is why you can trust such a responsible “jewelry” work only to real masters of their craft, who not only know, but subtly feel what frequency of rotation of the tool to choose on each individual part of the body, with what force to apply it to the surface, what paste to use on what varnish , and which one cannot be used, etc. Abrasive polishing is a very necessary and extremely responsible procedure that cannot be cheap. Therefore, do not experiment on your own and do not trust your car to an inexpensive car service.
Cost of abrasive body polishing
Restorative body polishing | C class | E class | S class and SUVs |
Complete body | from 12,000 rub. | from 15,000 rub. | from 18,000 rub. |
One piece | from 1,200 rub. | from 1,200 rub. | from 1,200 rub. |
Advance Star Guarantees
If you want to drive for a long time and with pleasure in a well-maintained car, which even after several years of operation will look like new and attract admiring glances, then you are shown restorative polishing of the car body, the price of which is the most reasonable in Advance Star. In addition, we guarantee the high quality of our work and value our reputation as a professional detailing center! Come and see that we are the best in the Russian detailing market.
Do you want too? The consultation is free and does not oblige you to anything.
Call +7(495)991-39-69 free call
Write WhatsApp Viber
or leave a request for a consultation x
Your request has been sent. We will answer you as soon as possible!
Pitfalls of restorative polishing
The restorative polishing method involves removing the top layer of paintwork damaged by mechanical and chemical factors and further applying a special protective composition. Although this method is widely offered and labeled as “absolutely safe,” it is important to be aware of the risk factors.
The main danger of this procedure is the removal of an excessive layer of coating.
So, the thickness of the varnish that covers a new modern car is about 100 microns. For comparison: the thickness of a regular A4 sheet is 90-100 microns. Abrasive polishing of a car body, which is a mandatory stage of restorative polishing, involves removing a layer up to 15 microns thick. In order to talk about “absolute safety”, we advise you not to overuse the number of polishing procedures and, of course, trust them only to true professionals.
Remember! The maximum number of restorative polishes for a car should not exceed three times during its entire “life”.
Ideally, it is recommended to do one professional polishing with the application of a high-quality, reliable protective coating. After which it is the protective layer that will be subject to external damage.
“Maximum” program (complex abrasive + restorative + protective)
This program is intended for all car paint colors and includes abrasive polishing of the car body, anti-reflective polishing, as well as protective polishing of the paintwork.
The service includes:
- Removal of bitumen and other contaminants.
- Cleaning the body with special synthetic clay.
- Treatment of paintwork with 3 types of abrasive-containing pastes (eliminate microwebs, holograms, dullness, impart crystal purity and transparency, ensure a stable and deep gloss of the paintwork).
- Application of a protective coating* according to the manufacturer’s technology.
- Keeping the car in a dry room for the necessary time to fix the protective layer.
Recommendations:
— Treatment of cars from 2 years of operation or more.
— Pre-sale preparation of the car.
— For all car paint colors.
Options for the Maximum program | Prices by car category List of car categories… | ||||||
I | II | III | IV | V | VI | VII | |
Maximum 1 abrasive restorative polish + epoxy-based protective polish “Wurth” | 12500 | 14600 | 16700 | 17900 | 18900 | 19900 | 27100 |
Maximum 2 abrasive restorative polish + wax-based protective polish | 12000 | 14100 | 16200 | 17400 | 18400 | 19400 | 26100 |
Maximum 3 restorative polishing + protective NANO-ceramic polish “Ceramic Pro Light” | 16500 | 20900 | 25100 | 26300 | 27300 | 28800 | 40000 |
Maximum 4 restorative abrasive polishing + protective polish liquid glass Body Glass Guard “Willson” | 16100 | 20000 | 22700 | 24600 | 25800 | 27900 | 34400 |
Maximum 5 restorative abrasive polishing + protective 2-component NANO polish “Autosol” | 14400 | 16500 | 18600 | 19800 | 20800 | 21800 | 28400 |
Maximum 10 Attention PROMOTION! Discount 10,000 rubles! restorative abrasive polishing + Multifunctional protective nanoceramic coating “Ceramic PRO 9H” + “Ceramic Pro Light” The price includes:
| 42200 32200 | 47800 37800 | 54200 44200 | 57800 47800 | 60500 50500 | 62700 52700 | 94900 84900 |
Maximum 7 New 2021! Restorative abrasive polishing + Professional protective nanoceramic coating for car body “Nasiol ZR53 9H” | 20150 | 24450 | 28900 | 31200 | 32500 | 33950 | 44700 |
Maximum 8 Attention PROMOTION! + protective polish “Willson - Silane Guard” (Silane protection) “Willson” Each additional layer (Work + material) - RUB 3,000. | 17000 16100 | 20900 20000 | 23600 22700 | 25500 24600 | 26700 25800 | 28800 27900 | 35500 34400 |
Maximum 9 Attention PROMOTION! Discount 10,000 rubles! restorative abrasive polishing + Professional protective nanoceramic coating “HKC Ceramic Coating v3.0” | 32200 22200 | 36900 26900 | 42100 32100 | 43800 33800 | 45200 35200 | 46000 36000 | 61000 51000 |
Maximum 6 restorative abrasive polishing + protective polish of your individual choice (brought with you) | 14100 | 16500 | 18700 | 19900 | 20900 | 22400 | 30600 |
All prices are indicated in rubles WITHOUT DISCOUNTS and are valid until... | |||||||
The work time under the “Maximum” program ranges from 5-24 hours*. *Depending on the choice of protective polish.
We work by appointment every day from 9:00 to 21:00 (Moscow time).
Any consultations and appointments are possible by phone. We will be glad to see you!
Pay attention to the nanocoating on glass - professionally applied at the Avtopolirovka.ru polishing center.
Our works...
Abrasive polishing of a car body is the careful removal of the top damaged layer of varnish in order to remove small abrasions, traces of scratches, dull areas and other defects. Since modern machines have a varnish layer of approximately 70-150 microns, and with a properly carried out procedure, 5-10 microns can be removed - this type of polishing is best combined with the subsequent application of a protective coating. This method of caring for your car's paintwork will extend its life.
What does abrasive restorative polishing provide?
The right approach to body polishing gives truly amazing results. By removing the thinnest layer of varnish, the master literally “erases” all traces of the car’s use from the surface - scratches, small chips and cracks, chemical damage, etc. The highest quality effect is achieved due to the fact that professionals use individual polishing products for each area of the body and various types of damage.
As a rule, this type of polishing is resorted to when the car body needs serious improvements. Despite the fairly high price of the procedure, car owners do not consider the money spent for it to be wasted. In addition to the visual effect, there is another one - the paintwork is protected for a long time!