About the design and operation of the car. Operation of the cenmax super 2 way alarm system. Review of Cenmax alarm system with and without auto start

Alarm connection

It is better to entrust the connection of the alarm to professionals, however, if the motorist wants to try it himself, then it is worth studying the instructions in detail. The connection diagram is described in the instructions. You should strictly adhere to the written instructions and observe safety precautions. After all, if you do everything incorrectly, the contacts may close and the connection wires may be damaged.

Before starting work, the first step is to disconnect the negative terminal from the battery. The electrical control unit is installed away from sources of heat and moisture. The communication module is installed on the windshield using double-sided tape.

How to install

About the design and operation of a car. There is a difference between injection and carburetor engines.
Which is better Equipment installation begins with unpacking the components, which are then connected using existing harnesses. The resulting car security system is connected to the battery terminals or to a 12 V DC source to test functionality. Additional visual inspection of components can help identify parts damaged during transportation.

The Super 2-Way signaling processor unit is located hidden under the instrument console trim; it is recommended to minimize the length of the connecting cables. The block is screwed to a metal frame. An indicator lamp indicating the operating modes of the complex is displayed on the side trim of the rack.

The siren is equipped with a waterproof housing that can be placed in the engine compartment. The location of the device should not be heated by heat from the exhaust manifold and have access through technological channels on the bottom of the car or in the wheel arches. Additional limit switches are located under the hood or trunk lid if there are no original elements in the locks. The parts are fastened inside a protective contour formed by a rubber seal.

Features of device key fobs

Chassis deviceAnti-roll bar Anti-roll barSelf-propelled chassisSelf-propelled chassisCar chassis device, purposeCar chassis device, purposeCar chassis device Chassis device

The Cenmax super 2 way car alarm is equipped with two key fobs, which makes it easy to control. The device's double-sided key fob is characterized by the presence of a dynamic code, which ensures security and limits the possibility of hacking. The key fob is equipped with four buttons, which makes it easy to use. Thanks to the presence of a liquid crystal display, reading information is as convenient as possible.

The device can be armed and disarmed using different buttons, which ensures fairly comfortable control of the device. Key fobs are equipped with vibration calling systems, which provides convenience when using them in noisy places. Thanks to this function, the user will always hear an alarm signal, regardless of the environment. The car owner can control the status of the key fob battery thanks to the presence of a special indication. Using the key fob you can program all functions of the system. The instructions will tell you more about this. If necessary, you can block the key fob keypad. Long-term operation of the key fob without a battery charge is ensured by the presence of an energy saving mode. The current time is constantly displayed on the key fob, which allows the car owner to conveniently track it. In case of alarming events, not only visual but also audio messages are sent to the key fob. It is possible to set an alarm on the key fob.

Super 2 Way, the instructions for which will be discussed in this article, provides its owners with two-way communication for comfortable use. Also, for convenient control over a long distance, Cenmax has equipped a key fob, which has all the necessary options. The article will talk about alarms in general and the key fob in particular.

Advantages and disadvantages

The main advantages of Cenmax products:

1. According to customer reviews, the alarms are quite convenient and easy to use.
2. The range of functions implemented in many models is not inferior to more expensive products from other brands.
3. The main unit can be used in a wide temperature range (from minus 40 to plus 80).
4. The autostart function is available on all models.
5. The presence of two-way communication allows the owner to receive information about the operating status of the system.

Disadvantages of alarms:

1. The systems come without an autonomous siren, which must be purchased separately.
2. Complicated installation and configuration procedure.
3. The key fob control system does not lock and unlock the car with the first press. This defect is noted by many owners of the Vigilant V-5A alarm system.
4. Breakdowns and incorrect operation of the main unit are possible.

How to use

Purpose, design and operation of the KamAZ 740 vehicle gearbox

When using the equipment, the driver changes modes using a communicator or a backup transmitter. Individual buttons are used to enable or disable protection. A key with an icon in the form of a crossed out speaker allows you to turn on the equipment without the siren beeping. The manual provides recommendations for enabling security modes.

The instructions for use recommend setting up the communicator using the following algorithm:

1. Hold down the button marked with an asterisk until a double signal is given.
2. After turning on the clock field, the value is adjusted (using the security control buttons).
3. Press the star switch to adjust the minutes.
4. By briefly pressing the star key, the user programs the alarm and timer.

The alarm system supports up to 4 communicators, which are stored in the memory of the security complex. The Super 2-Way user enters setup mode by holding the programming toggle switch for 6 seconds. To enter the code, you must simultaneously press the security mode switching buttons. The operating instructions remind you that the remote control recording interval should not exceed 6 seconds. Previously used devices are automatically deleted from memory when entering setup mode.

Setting up autorun

The equipment supports autostart only using a button located on the communicator. Starting is possible with the gear lever in neutral (manual), the ignition circuits are disconnected and the engine compartment lid switches are closed. Before leaving the cabin, you must secure the car with the parking brake.

To start the power unit, you must be in the communication zone; to turn on the starter, hold down the button marked in the form of a locked padlock. The communicator will give a signal, the button will be released and pressed again. The driver looks at the display, monitoring the moment the engine starts to work using the icon in the form of an exhaust cloud and the text St, while a melodic signal is played. The motor will run for several minutes (the time is programmed when setting up the unit) and then stop. Premature shutdown of the unit is allowed according to a scheme identical to startup.

To activate the daily start, press the switches marked with the symbols of a crossed out loudspeaker and an open lock in succession. The motor starts automatically and the corresponding icon is activated on the display. Temperature triggering starts after sequentially pressing the button with the speaker icon and the locked lock. The temperature threshold is entered by programming the central unit.

Setting up a car alarm

After installation and performance testing, you should configure the security system parameters. The functions are configured sequentially. Brief instructions will be given using the Cenmax ST-5A device as an example.

To configure programmable system options you will need:

1. Deactivate the alarm.
2. Turn on the ignition system.
3. Press the service key six times.
4. Turn off the ignition system. The alarm siren should respond to this by sending six short signals. The control diode will give 6 short flashes.
5. Using the service button, select the required option. The data is given in the programming tables in the alarm manual. The function number corresponds to the number of times the button is pressed. It should be taken into account that in this mode, Cenmax systems signal every fifth press with a long beep. For example, to set function 4, press the button four times. In response, the alarm will give four short beeps. When selecting function 6, you will need to press the service key six times, but the alarm will give one long and one short beep.
6. After entering the function menu, you need to assign a parameter to that option. An alarm key fob is used for this. Pressing the buttons can be short, single, or double. All parameters are indicated in the manual. After selecting a value, you must wait for a sound signal, which confirms the recording of data in the system memory.
7. After setting the last option, turn on the ignition and exit the programming mode. The system can independently exit the menu after 5-7 seconds of waiting. This will be displayed visually – by a five-fold flash of the car’s exterior lighting lamps.

If you use a car alarm system with auto start, you must perform the procedure for learning to idle the engine:

1. Turn off all additional devices that load the engine during operation (heated glass systems, audio system, microclimate system).
2. Turn the key in the lock until the ignition is turned on.
3. Press the service key nine times.
4. Deactivate the ignition.
5. Wait for sound and light confirmation of entering the setting.
6. Turn on the engine.
7. After warming up and establishing a stable idle speed, press the service control button and hold until the sound signal sounds.
8. Release the key.
9. If the system produces four short beeps, the learning procedure will have to be repeated.

Specifications

Main technical parameters of the equipment:

• equipment operating temperature - -40…+85°С;
• permissible current in the engine blocking block circuit is up to 30 A;
• current in the central locking control line - up to 15 A;
• current in control circuits of external lighting devices - up to 10 A;
• signal reception and transmission distance – up to 300 m;
• communication channel encoding type - FM frequency modulation.

Equipment

The manufacturer supplied the Super 2-Way alarm system as a ready-made kit, which included the following components:

• head unit prepared for installation on a car (with a set of fasteners);
• communication module with built-in antenna;
• piezoelectric shock sensor with separately adjustable warning and alarm zones;
• communicator (with monochrome screen) - 1-channel auxiliary signal transmitter;
• control diode;
• parameter programming key;
• separate anti-robbery mode switch;
• connecting cables;
• instructions for use.

Autostart system Cenmax Super 2 Way. Instructions

Cenmax car alarms use an autostart system. It can only be installed on a gasoline or diesel engine. If the driver wishes, the alarm system is often equipped with automatic engine start. This function is very helpful in the winter, when you need to warm up the car in advance, but don’t want to go out into the yard. But some drivers are afraid of this, since with the engine running there is a chance that the car will be stolen. To solve this problem, the Super 2 Way device has an advanced anti-grabber system that minimizes the risk of the vehicle being hacked.

The Cenmax alarm system has all the necessary anti-theft functions that provide maximum security for your car. To facilitate integration, the device is adapted to connect to the Can-Shina program. For comfortable use and installation of this program, you need to read the instructions for Cenmax Super 2 Way.

Download installation instructions for Cenmax alarm systems for different models in PDF format

You can download service manuals for setting up and managing Cenmax car alarms using the following links:

Cenmax Super 2 Way

The instructions for Cenmax Super 2 Way help you become more familiar with the many capabilities of this alarm. For example, to start the car engine, open the trunk, and unlock the driver's door, you can use special options on the main panel.

There are times when a key fob is lost or stolen, and many of its owners wonder: what to do in such situations? To avoid this, you should read the entire Cenmax Super 2 Way instructions in advance.

Before using the alarm, you must set a personal code that will help block not only the car, but also the key fob itself in case of its loss. For maximum protection, you can disable the security system in only two steps. After the owner has activated the security mode, the light inside the car will remain on for a few more minutes. This alarm, like many others, has a turbo mode, which provides the driver with a special timer, after the end of which the car’s security will be activated.

User manual

How to use a car alarm correctly? We'll talk about this right here and now.

Using specific key combinations on the key fob, you can carry out the following commands:

• Set or remove security mode;
• Manage the shock sensor;
• Activate the security mode with the engine running;
• Use an immobilizer;
• Enable protection against intruders;
• Control the ignition.

The system provides for the use of a feedback channel. Thanks to which the owner can configure the autostart of the engine:

• By notification from the key fob;
• According to pre-configured parameters;
• Periodically.

No one is immune from the difficulties associated with key fobs. This is when the programmed code comes in handy. It usually represents two digits. The standard code is usually 11.

How to enter a new code:

• Deactivate the ignition and security mode;
• Press the button with program settings four times;
• Start the ignition;
• Wait for a sound notification, and then re-enter the settings window to enter the first digit;
• The second digit can be set by briefly pressing button No. 1;
• To complete the settings, remove the key from the keyhole.

If the key fob is broken, you must do the following:

• Press service mode three times. In this case, the ignition must be started and the doors unlocked;
• Remove the key from the lock;
• Hide the key in a secret place;
• After 20 seconds, the security mode will be activated, but the doors will remain unlocked;
• If you unlock the doors or start the ignition, the alarm mode delay is activated. Its duration is also 20 seconds;
• You can deactivate the car alarm using a PIN code;
• If you fail to disable the anti-theft system, you will hear a siren.

Instructions for setting up and managing the cenmax vigilant car alarm

The display of the main alarm key fob hides a set of system functions in the form of icons. Just from one picture, the car owner can easily understand what a specific function is intended for. The main points of alarm system management that everyone should know are as follows:

• the user must put a two-digit password on the main key fob;
• at any time you can use one of three additional channels to control the system;
• the user can use regular sound notifications or a vibration bell as a signal;
• You can cancel the alarm using button 1;
• Button number 2 will help the driver disarm the car;
• disabling the alarm without disarming the car is done using button 1;
• to turn off the siren you need to press button number three, and to turn off the shock sensor, button number one needs to be pressed twice in a row.

Additional functions can be enabled by finding the corresponding picture in the menu and clicking on it. The cenmax vigilant alarm system allows you to arm your car even if it is parked with the engine running.

Models and configurations

At the beginning of [year] the following Cenmax Vigilant alarm models were on sale:

• ST-8A, cost about 4,500 rubles;
• ST-7A, price approximately 4200 rubles;
• ST-5A, retail price RUB 4,100;
• V10-D, costing about 3,900 rubles;
• V-8A, approximate cost 3,700 rubles;
• V-7A, retail price RUB 3,700;
• V-6A, cost about 3,700 rubles;
• V-5A, retail price 3800 rub.

Photos of some Cenmax alarm systems with feedback are shown below.

Alarm Vigilant ST-7A

Alarm system Vigilant ST-8A

Vigilant V10-D system

Security system V-6A

The standard configuration of all Cenmax systems consists of the following components:

1. Central unit with microprocessor control system.
2. Two key fobs that can be used to control functions. The main key fob with four buttons and a liquid crystal screen can work in both directions. It has two alarms - sound and vibration, which are used to inform the owner about various events during operation or configuration of the system. And an additional one with three buttons that only works in one direction.
3. Set of sensors;
4. Signal receiver and limit switches for body elements.
5. Wiring harnesses for connecting the key fob and sensors to the vehicle's electrical network and to each other.
6. LED to indicate operating modes.
7. A special button that is used to configure parameters.
8. A set of documentation for installation and operation of the product.
9. Warranty card.
10. Warning stickers on car windows.

CONSUMER ANALYSIS

MODEL FEATURES: the CENMAX VIGILANT alarm system is equipped with one four-button key fob pager with a liquid crystal display and one regular three-button key fob.

The system PIN code consists of two digits, each of which can take values ​​from 1 to 4.

ANTI-THEFT CAPABILITIES of the Cenmax Vigilant alarm system, one output for NC/NO interlock, one NC/NO relay included in the delivery set.

FEATURES OF SERVICE CAPABILITIES of the Cenmax Vigilant alarm system: it is possible to use the function of polite interior lighting when disarming and locking windows when arming, as well as using the standard “comfort” function of the car.

ADDITIONAL CHANNELS: The Cenmax Vigilant alarm system is equipped with three additional channels.

The first additional channel of the Cenmax Vigilant alarm is designed for remote unlocking of the trunk.

Using the second additional alarm channel Cenmax Vigilant, it is possible to control the hood lock, implement the function of polite interior lighting when disarming or automatically locking the windows when arming. The channel can be programmed as activated when disarming/arming or by command from the key fob; you can also programmatically set the channel type: timer with a duration of 1/20/30 seconds or latched.

The third additional channel of the Cenmax Vigilant alarm is designed to control various electrical equipment of the vehicle and can be programmed as a timer with a pulse duration of 0.8/10 or 30 seconds or as a latched one.

OPERATION OF THE KEY FOB WITH TWO-WAY COMMUNICATION: when the Cenmax Vigilant key fob receives alarm signals, a sound signal or vibration alert is heard and the icon corresponding to the cause of the alarm flashes on the LCD screen. When working with a keychain pager, you can use a clock, an alarm clock, a timer for 10/20/30/60/90/120 minutes.

The following symbolic icons are displayed on the screen of the Cenmax Vigilant key fob: the system is disarmed; security mode is on; security mode is turned on with the engine running; sound signals when the shock sensor warning zone is triggered are disabled; auto-arming mode is programmed; anti-robbery mode enabled; the Cenmax Vigilant alarm is in service mode; Shock sensor disabled; the shock sensor was triggered; the door sensor has tripped; the trunk sensor has tripped; the hood sensor has tripped; vibration mode is turned on; when transmitting a command from the key fob pager, there is no radio communication with the system; battery charge level. The numbers on the screen display the time, alarm setting time, and timer.

After receiving alarms, the Cenmax Vigilant alarm key fob goes into reminder mode, which can be disabled with the appropriate command.

If a door, hood or trunk is open when arming, the triggered zone will be indicated on the display of the key fob pager.

COMMUNICATION RANGE: When tested in both rural and urban environments, the Cenmax Vigilant alarm system shared first place in reception range with another tested model, and took second place in transmission range. The reception range of the key fob pager in rural areas was 1400 m, the transmission range was 600 m; and in urban conditions 800 and 490 m, respectively.

Expert reviews about the Cenmax Vigilant alarm system

ADVANTAGES: long range of reception and transmission of the keychain pager, which is also equipped with an LCD, clock, alarm clock and timer.

DISADVANTAGES: one of the disadvantages is the lack of a separate input for the volume sensor.

OVERALL ASSESSMENT: according to the test results, the Cenmax Vigilant alarm system shared first place in terms of reception range of the key fob pager with another tested model and took second place in terms of transmission range. Key fob pager for the model with a liquid crystal display. In addition, three additional service channels of the system can be noted.

Possible malfunctions and their solutions

The following malfunctions are typical for Cenmax alarms:

1. It is impossible to turn the system on or off by pressing the remote control buttons. The reason may be a discharge of the battery in the key fob or a failure of the signal transmission circuit. It is recommended to change the battery in the device. If the problem persists, the receiver or transmitter may fail. In this case, you need to use an additional key fob. When this method does not help, the problem lies in the failure of the antenna module or the central alarm unit.
2. Failure of the trunk opening drive. This function is implemented via a separate channel and often fails on all Cenmax alarm models.
3. Frequent system activations for no reason. The reason is the increased sensitivity of the shock sensor. To eliminate the defect, it is necessary to adjust the sensitivity level.
4. Problems with locking and opening locks on all or some doors. The cause may be a breakdown of the central unit or damage to the electrical wiring harnesses. To correct the defect, it is necessary to ring and repair the wiring. If the problem lies in the block, then there is only one way to fix the defect - replace the alarm.

The reason for the incorrect operation of the system may be errors in setting parameters that can be reset to factory settings:

1. Activate the ignition.
2. Press the service key ten times.
3. Turn off the ignition and wait for the sound signal.
4. Press the button once and enter reset mode (confirmed by a short beep).
5. Press key 1 on the control key fob. Resetting the settings is confirmed by one sound signal from the alarm and control panel.
6. Exit setup mode and check the operation of the system. If operation is normal, you will need to reconfigure the settings. If the problems continue, it is recommended to contact the service for a detailed analysis of the components of the security system.

You will learn about the features of installing alarm systems with auto start from the video from the scherkhanalarm channel.

Functions

The Super 2-Way head module supports the following functions:

• car security with sound and light signals;
• additional panic mode;
• turning on the anti-robbery mode with a hidden switch;
• remote start with adjustable warm-up time;
• remote control shock sensor;
• management of additional locks;
• support for central door locking mode.

Advantages and disadvantages

Owners of cars equipped with a Cenmax Super 2-Way alarm system note the advantages of the device:

• low cost;
• simplicity of design and installation diagram;
• Remote engine start is possible.

At the same time, the following are the disadvantages of the security complex:

• low resistance of the communication channel to interception;
• the influence of radio frequency interference on the operation of remote controls;
• outdated design of the central unit;
• lack of spare components due to discontinuation of the product.

Some features

The car alarm has several key fobs in its arsenal for maximum convenience. To avoid losing the key fob, a dynamic code is installed on it, which will not allow it to be hacked. On the body itself there are only four buttons for convenient control of the vehicle.

The Super 2 Way key fob display has a liquid crystal screen for more comfortable viewing of information. The device has a vibration call, which will help you “hear” it in noisy places and rooms. Thanks to the presence of this function, the vehicle owner will always receive an SOS alert signal and will be able to react quickly. Also on the main display there is a battery status indicator that will notify the owner in case of a minimum charge. Cenmax Super 2 Way has very easy to understand instructions. Copies are also available in various languages.

Super Agent car alarm is a new stage in the evolution of car security systems. The Super Agent device replaced the MS-PGSM Sputnik product and has already earned the trust of consumers due to the ease of use of the system on modern cars (including keyless entry), as well as due to the highest degree of protection against electronic hacking, provided by a dialogue code with individual encryption keys (key length 256 bits).

Installation on vehicles with CAN bus:

Special applications for smartphones:

To monitor your car and control the SuperAgent system, you can download free applications for smartphones on iOS and Android

Protection against jamming of GSM communications and GPS signals:

Remote, automatic engine start and pre-heater:

Starting the engine is possible through a voice menu, an SMS message from your phone, as well as a mobile application or personal account of the service www.car-online.ru. Automatic start by timer, alarm clock and voltage drop. The interaction of autostart with the engine preheating system ensures timely charging of the car battery and extends engine life by eliminating “cold starts”. Connected optionally.

Photos from the car:

Digital photo recorders MS-NC485TCM are optionally connected to the SuperAgent device. When an alarm event occurs or according to a condition configured on the car-online website, photos are transferred to the user’s personal account and to the mobile phone screen when using the Theft.net+ application. It is possible to connect up to 8 photo recorders.

Super Agent Equipment:

• Main unit
• Tag (slim) = 2 pieces
• Code switch
• Digital engine blocking relay MS-RL300 (400)
• Digital hood lock control relay MS-RL200
• Dual color LED indicator
• User's Manual

A car alarm is responsible for the safety of the car and personal belongings in it. But among all the different options and different brands, it’s hard to give preference to any one. The Cenmax alarm system is a security system of Taiwanese origin that has proven itself well and is in demand among motorists. It is worth telling about it in more detail.

How to set the clock on a cenmax key fob

In this article, we asked the wizard to answer the question: “How to set the clock on a cenmax key fob?”, as well as give useful recommendations on the topic. Read on to find out what came of it.

The regular arrival of new anti-theft systems on the market surprises consumers not only with quality, but also with cost. No one will argue that using an alarm system is the best option for protecting a vehicle. Below you can find out what the Cenmax alarm for cars is, what its features are and how to use the system correctly.

Car alarm manufacturer Cenmax has made sure that anti-theft systems meet all necessary security requirements and standards. By purchasing a car alarm from this brand, you can reliably protect your car, at least that’s what the manufacturer assures customers.

What are the features of the Cenmax anti-theft system:

Central unit of the Cenmax system with remote control and board

Now let's briefly look at the instructions for using the anti-theft system with an emergency shutdown button. First, let’s find out how to connect a Cenmax car alarm.

Let's consider the procedure for connecting a Cenmax alarm with an emergency shutdown button according to the diagram above. As stated in the instructions, before installing the system, you must first disconnect the negative terminal of the battery.

Now let's move on to setting up the Cenmax alarm with an emergency shutdown button. Let's look at the process of setting up the main functions using the ST-7 model as an example.

First, let's find out how to set up a PIN code:

Wire connection diagram Regarding setting up the shock sensor:

Cenmax alarm setting table If the control panel fails and the machine needs to be put on protection, then perform the following steps:

What kind of breakdowns can a car owner encounter when installing a Cenmax alarm system?

The information below is based on reviews:

Friends, help! There is a keychain with the inscription Cenmax, and the alarm of the same name is installed accordingly. The instructions for the Cenmax Vigilant ST-7 alarm indicate that it comes with auto start, which would be very useful.

With the engine running and the doors closed and the brake pedal pressed, press button 2 on the remote control. Turn off the ignition - the engine will continue to run

. Get out of the car and close the door. Arm the system, the engine will stall either immediately or in accordance with the turbo timer setting. If there is no alarm after this, the system will allow remote engine starting. If the door, hood or trunk were opened, or the shock sensor was triggered, remote starting will be disabled until the above procedure is repeated. If you do not arm the system, the engine will stall after approximately 25 seconds (or according to the turbo timer setting). To start the engine, press button 1 and hold it pressed until the remote control beeps. After the beep, immediately press button 1 again.

If the engine does not start the first time, the system will make 2 more attempts to start the engine.

Here's something the engine doesn't continue to run when I take out the key. WHAT'S WRONG? Go to the master and let him fuck with her?

The easiest way to figure out how to set up autostart on a Cenmax alarm is to use a specific example - the popular Cenmax Vigilant ST-7 model.

If we are talking about autostart for cars with automatic transmission, then the procedure should be as follows.

Interestingly, you can either set the engine operating time and the starter cranking time yourself in advance, or be content with the auto settings. By default, the engine warm-up time in Cenmax models is 10 minutes.

You can autostart a car with a manual transmission using the same algorithm, but first the car owner needs to make sure that the gearshift knob is strictly in the neutral position.

Remotely using the alarm key fob, you can not only start, but also turn off the engine. How it's done?

You can start the engine using a timer like this.

Autostart Cenmax Vigilant ST-7 may not function for various reasons:

In all these cases, it is recommended to contact specialists at a service station. They will figure out why the alarm is not working and solve the problem. However, sometimes you can still fix autorun problems yourself.

Perhaps you have your own opinions on the topic “How to set the clock on a cenmax key fob”? Write about it in the comments.

Reasons and procedure for no response to the key fob

What to do if the alarm does not respond to the key fob? There may be several reasons:

1. My battery is almost done . The most common reason is a dead battery, which can be eliminated by replacing it.
2. Radio interference. It happens that radio interference interferes with the normal operation of the alarm system; to check whether this is so, you should carry the key fob close to the communication module and perform any action.
3. Insufficient voltage. It is possible that there is not enough voltage on the dead battery. It is necessary to charge the battery or, if it is unusable, replace it.
4. Synchronization is broken. It happens that the alarm has lost contact with the key fob and needs to be reprogrammed. To reprogram, you must first turn it off, as described above on how to turn it off.

Synchronization failures most often occur on third-generation security systems, but this does not mean that they always occur. It is best to entrust reprogramming of alarm settings to an auto electrician from a specialized service station. Indeed, besides the fact that it is not so simple, the correct setting will directly affect the operation of the security system in the future.

The main causes of autostart problems from the Cenmax brand and how to fix them

Features of the Sherkhan Logicar 1 alarm system and detailed installation and operating instructions

Autostart Cenmax Vigilant ST-7 may not function for various reasons:

• damaged wiring;
• incorrect installation of the immobilizer antenna;
• synchronization errors.

In all these cases, it is recommended to contact specialists at a service station. They will figure out why the alarm is not working and solve the problem. However, sometimes you can still fix autorun problems yourself.

• For example, if the key fob’s battery runs out, you just need to replace it with a new one.
• Sometimes a car is not autostarted due to insufficient voltage of the battery in it. In such a situation, it is enough to charge the car battery.
• Autostart may not respond to key fob commands due to radio interference. The solution here is simple - you need to move closer to the car or wait a little.

Installation instructions on how to properly connect cenmax

Each car alarm has its own characteristics in terms of connection and operation. Cenmax vigilant does not lag behind its competitors in this regard. In order to install it, you need to open access to all connection points in the car, and then proceed as follows:

• wrap the central unit with foam rubber and install it where there is plenty of space - behind the instrument panel;
• install a siren and antenna in the trunk;
• connect the limit switches to points on the trunk, doors, hood;
• connect the wires to the ignition system, turn signals, dimensions;
• conduct the wiring in dry places, using additional plastic tubes so that it does not bend, high-quality insulating tape and extension cords;
• install shock, temperature and other sensors in hidden places;
• If autorun is present, turn it on and check the system's functionality.

If all is well, the alarm will beep once and the headlights will flash. If one of the elements is installed incorrectly, the car alarm will sound four times and the headlights will also flash four times.

How to turn off the alarm?

In the event of a breakdown or loss of the remote control, you can deactivate any Cenmax brand alarm. The emergency shutdown procedure depends on the system model.

To deactivate the ST-5A device you will need:

1. Open the door lock with the key, the alarm will work normally.
2. Insert the key into the lock and turn it until the ignition is turned on.
3. After this, press the service button four times.
4. Turn off the ignition. The system should be deactivated.

To disable the ST-8A model system, you must enter a PIN code:

1. Activate the alarm by opening the door.
2. Turn on the ignition.
3. Dial the first digit of the code using the service button.
4. Turn off and turn on the ignition.
5. Dial the second digit in the same way.
6. Turn off the ignition. If the code is entered correctly, the system will be disarmed.

Deactivating the V-8A system follows a slightly different procedure:

1. Open the door and turn on the ignition.
2. Press the service button three times.
3. Turn off the ignition. The system will beep twice and turn off.
4. If the code mode is enabled through the system settings, you will need to enter a PIN code according to the ST-8A shutdown scheme.