How to tint a car's license plate with your own hands

How to paint license plates on a car correctly

For a white background, special white reflective paint is used; for symbols, black paint with minimal reflectivity is required. Technical side Since repainting a white background is quite problematic and even dangerous, the easiest way to get by with little damage is to tint the symbols with a marker. Waterproof markers with the inscription “Permanent” are suitable for restoring numbers. Some tips for those who decide to use this method:

• The marker requires the same preparation of the car as regular paint (the part must be thoroughly washed, dried, and degreased).
• It's easier to work with a marker that has a flat end, like text highlighters.
• In order not to accidentally crawl beyond the boundaries of the symbols, it is advisable to place paper or cardboard near their edge.

If your hand still trembles, the marker gets on the precious white paint, you need to remove these traces.

Experienced motorists do not recommend painting license plates while squatting in front of the car, since most likely the lines will turn out crooked and the white background will be stained with black paint. The paint should be applied with a thin brush, carefully drawing out the boundaries of letters and numbers. Self-tinted numbers should last at least 2 months.

Their service life directly depends on the quality of the paint used and weather conditions. Restoring license plates on your own has a number of advantages:

1. Low cost - painting materials should cost several hundred rubles.
2. It won't take much time to recover.
3. An excellent result - the rooms look beautiful.

The problem may be that not all car owners will be able to carry out the painting perfectly.

Price

Let's do a comparative analysis of the cost of all the considered methods of restoring license plates.

Naturally, the comparison will be approximate, since prices for the necessary materials vary depending on the volume of packaging, the manufacturer’s brand, the city and region of purchase.

Table 1. Comparison of costs of different methods.

In the case of producing a duplicate number, the cost of producing two license plates is indicated; if it is necessary to replace only one number, the cost will also be halved.

What to do if license plates are erased

Numbers and SIM cards in Izhevsk

Each vehicle has its own state registration number. This is a kind of car passport. Under no circumstances should you carry out operation if the license plates on the machine have been completely erased or they are partially unreadable. You also cannot travel if there are no rooms or they are not located in the designated place.

Faded numbers

Many drivers go to numerous lengths to keep their license plate safe and sound. They use special sprays that supposedly protect the number from being erased; they use number frames or metal mesh.

Reasons for erasing numbers

There are quite a lot of reasons for erasing numbers. Here are some of them:

• poor production quality (poor quality material or paint);
• physical impact on the sign with various hard and blunt objects (intentional, hopeless, accidental);
• damage to the license plate due to a car accident;
• other.

The reasons are clear, but what to do if the numbers are erased? Can they be tinted or do the numbers need to be replaced?

This problem of the paint on license plates wearing off is familiar to quite a few motorists.

But how to get out of this situation? On the one hand, the license plate is like a state document of the car, and therefore corrections and changes are absolutely not permissible here.

Numbers can be painted

We can say that there are still enough arguments in favor of tinting the license plates and it is more likely that they can be painted than not.

This is due to the fact that tinting letters and numbers has nothing to do with changes or corrections. This is just a restoration of existing information, which also improves its perception.

And besides, there is not a single law that would prohibit the implementation of such a procedure.

When producing standard state license plates, two colors of paint are used: white and black. White color serves as a background and has reflective properties. The letters and numbers of the number are applied with black paint. The black color gives the number a clear look that is easy to read against a light background.

It is strictly forbidden to add or tint the white background, as this leads to the number losing its reflective properties. And this is a violation of GOST requirements and a reason for the traffic police officer to issue you a fine.

Touching up the numbers and letters of the license plate with black paint does not violate the requirements of GOST and does not change the visual appearance. Therefore, what is not prohibited seems to be allowed. At least there's nothing illegal about it.

The numbers are painted black, you need to act carefully

If you paint, then with what?

If your number has been erased and you still decide to touch it up, then it is important to choose the right paint. There are many different types of black paint available today.

It should be noted that in no case should you use non-waterproof types of coloring compositions, such as gouache and watercolor.

Having chosen a good, durable paint, you need to remove the number, wash it, dry it thoroughly and get to work in a convenient, bright place. You should not touch up the sign while squatting in front of the car; the lines may turn out crooked, and the light background may be accidentally stained with black paint.

Tinted numbers will last at least 2 months. Their service life will depend on weather conditions and the quality of the paint.

Duplicate or new number

If your state has been erased. number, but you do not want to carry out such a procedure as tinting its informative part, then you will have to replace it.

This can be done by contacting the traffic police department at your place of residence. This procedure is quite labor-intensive and time-consuming. Complete re-registration of a car entails a change of license plates. You can go through another procedure and get duplicates of existing numbers. But this is also quite long and not easy.

You can replace license plates at the traffic police department

If your number is erased, certain types of companies know how to replace it. This line of business is quite new and such offices currently exist only in larger cities. These are legal companies that are engaged in the legal issuance of duplicates of state license plates.

The simplest and cheapest of the existing ones is, of course, tinting. Easier and simpler, but the most expensive, is contacting a company that will issue a duplicate license plate.

And the most difficult option is the fight against bureaucracy in the traffic police.

Video: DIY license plate painting

Restoration of rooms

If you have neither the time nor the inclination to touch up the license plates yourself, then it would be advisable to contact specialized companies. There is no specific fixed price for license plate restoration; options for solving the problem are offered directly when inspecting license plates.

If the number is almost completely erased and is damaged, you will be asked to make duplicate numbers. Moreover, there is no need to order 2 license plates at once; if the paint has come off from one of them, then you can limit yourself to replacing only one license plate.

In order to order and receive a ready-made duplicate, you will only need to spend from 15 minutes to 1 hour of your time, in addition, many organizations provide their clients with the opportunity to place an order on the website and arrange delivery of ready-made numbers, paying for the work upon receipt.

Before contacting such organizations, it is recommended to make sure that they have a license to engage in this type of activity, issued by the Main Traffic Safety Inspectorate of the Ministry of Internal Affairs of Russia.

For most car owners, having a license plate produced by a licensed private organization will be much more profitable than contacting the traffic police MREO directly.

This is due to the fact that the State Traffic Safety Inspectorate does not make duplicates; here you will have to go through the re-registration procedure to receive new numbers and STS at the standard cost for 2021 in the amount of 2,850 rubles .

Required documents

So, touching up the numbers yourself is the easiest and most cost-effective way out of the situation if you have the time and desire to do it yourself. If you contact any organization to restore or restore a license plate, then it becomes necessary to confirm your identity.

To do this you will need to present the following documents:

• Vehicle owner’s passport or driver’s license;
• STS.

When contacting the traffic police, the list of documents will be a little wider, since in this case new numbers with different symbols are issued. Accordingly, a new STS is manufactured and a mark is made in the PTS.

For this you need a standard list of documents:

What to do if the license plates on your car are erased

What do black numbers on a car mean?

Good afternoon, dear reader.

Over time, the state registration plates (numbers) of any car lose their original appearance. Under the influence of rain, snow, sand, dust, reagents and other factors, the black paint on the numbers gradually wears out and the numbers become unreadable.

Different drivers' license plates wear out differently. The degree of wear depends primarily on the operating conditions of the car, on the mileage of the car, as well as on the quality of manufacture of the plates themselves. For example, in the case of a low-quality batch, the numbers may be erased after the first rain. Such numbers are quite rare in practice. More often than not, numbers wear out, so to speak, from time to time.

Today we will talk about what to do if the license plates on your car have been erased. Let's get started.

Let's consider all possible options in turn.

How to paint a car license plate with your own hands

1. To paint a license plate, you need to prepare its surface for painting. Take a scraper or fine-grit sandpaper and very carefully sand down the old black symbols until the metal underneath the paint shows. You can use a blowtorch.
2. If there is corrosion on the metal, the places where it forms should be treated with rust converters.
3. Take a solvent and degrease the metal surface.

Is it possible to drive without a rear license plate?

For a white background, special white reflective paint is used; for symbols, black paint with minimal reflectivity is required. Technical side Since repainting a white background is quite problematic and even dangerous, the easiest way to get by with little damage is to tint the symbols with a marker. Waterproof markers with the inscription “Permanent” are suitable for restoring numbers. A few tips for those who decide to use this method: Operating any car inevitably leads to license plates losing their original appearance. As a result of exposure to rain, sand, stones and various reagents on the road surface, the symbols on the license plates can quickly be erased. Since driving a car with unreadable registration plates is strictly prohibited, a logical question arises: is it possible to tint the license plates on a car?

Reasons for the rapid deterioration of license plates The condition of a license plate may depend on a number of factors. The first is, of course, mileage: the greater it is, the higher the degree of wear of the numbers. In addition, the decal may be affected by the conditions in which the vehicle is used.

For example, driving a car in the city has much less impact on the paint than in harsh driving conditions. Some car enthusiasts try to protect their license plates by placing them in special metal frames. But a clear difference from the norm will certainly cause a stop and cause difficulties during the procedure for passing a technical inspection of the car. Only black paint must be used, without various additives and impurities. It must be waterproof.

GOST does not contain special requirements for the parameters of the luminous qualities of this paint. It is best to take the simplest one - black, the use of nitro enamels is appropriate! You will need some more blue and red paint to touch up the flag on the number. What to do if the paint on your car license plates has worn off?

Minor scratches and chips may be carefully touched up, and this should not cause any complaints from police officers. However, repainting the entire surface of the license plate will violate the relevant standards, since the holograms will disappear and the surface of the license plates will lose its reflective properties. So, tinting the letters and numbers on the license plate with black paint meets the requirements of GOST, because it does not change its visual appearance.

Therefore, what is not prohibited must be permitted. There is nothing illegal about this, that's for sure. Recommendations for proper painting Before you start painting the numbers, they need to be properly prepared. To do this, remove them from the car, wash them thoroughly and dry thoroughly. Then degrease the license plate and begin restoring it to its original condition.

But is this legal? Is it possible to tint license plates? This question interests many car enthusiasts, but it is very difficult to find a definite answer to it.

On the one hand, the numbers are a state document that is prohibited from being changed or corrected. On the other hand, if even one letter or number is erased from the license plates, this will be a fair basis for issuing a fine from an attentive traffic inspector. However, you must agree that making a duplicate or going through the procedure of replacing a state license plate every time is not a very tempting prospect. Ultimately, we can conclude that touching up license plates is permitted rather than prohibited.

What factors can negatively affect the rapid erasure of license plate paint?

A variety of factors can affect the condition of the license plate. First of all, we are talking about the significant mileage of the vehicle. The higher the mileage, the higher the degree of wear of the plates. In addition, the label may be affected by the operating conditions of the machine. The less negative factors affect the numbers, the better it looks.

Some drivers try to protect license plates by placing them in special frames, which gives certain results. To avoid damage, some people try to place a special film on the sign, but such actions do not give a positive result.

Sometimes it happens that the issued license plate was initially of poor quality and very quickly became unusable. The owner of the car just needs to order a duplicate. This can only be done by contacting a private company or government agency. Unfortunately, there is a group of fraudulent companies that produce low-quality signs, so you should approach this issue very carefully. Additional information on the topic of the note is presented in the video:

What to do if the license plate on your car is erased

The influence of time affects absolutely everything, including the registration numbers that are installed on each vehicle.

Paint can wear off with varying intensity depending on the degree of aggressiveness of operating conditions and the nature of the factors that affect the license plate.

An important question interests many car owners, which we will cover as fully as possible - what to do if the license plate on the car is erased?

We paint it ourselves

The easiest and cheapest way to fix a problem with a registration plate is to paint it. Questions immediately arise here. For example, is it possible to tint license plates without permission from government agencies and without the assistance of a specialist? With absolute certainty the answer can be given in the affirmative. True, with some reservations:

1. Such acts do not entail punishment, since there is no fact of forgery.
2. When working with a number, it is worth remembering that it must comply with GOST requirements, which for the most part relate to the white part of the number. It should not be covered with black paint, and during restoration only special materials with a reflective effect can be used. If such violations are detected, the fine will be 5 thousand rubles, and they may also leave you without a license.

Painting process

If the paint on the numbers has worn off and you decide to correct this situation by painting, then you can use any paint for the numbers and letters. To prevent black material from getting onto the white part of the sign, you should carefully and carefully cover it with regular masking tape. It will allow you to maintain compliance of the registration plate with GOST standards.

Before you start painting directly, the number must be prepared accordingly. We remove it from the car, wash it thoroughly and then dry it. You will also need to degrease and only then can you restore the original state.

Here a logical question arises about how you can tint your car license plate. It's okay to consider several options, but any material you choose should be water-resistant.

It's best to choose a good paint, but in a pinch, a marker will do. In the latter case, the effect will be short-lived.

This method of restoring a license plate on a car can save a lot of money, but it will take a lot of time, especially in the absence of relevant experience.

Making a duplicate

There is another way that will allow you to restore a damaged number. Its essence is to make duplicates.

You can easily find several companies that will take on this matter, and within the framework of the law.

If you decide to take the easier route and not think about how to tint the car’s license plate, take the documents for the car and go to one of the offices that provides similar services to the public. In some cases, this particular method of restoring a registration plate is the only one, but not in our situation.

We completely change the signs

Rooms that have lost their appearance can be completely changed. To do this, you need to go to the traffic police, write an application, pay the state fee and get completely new license plates for your car. This method is the most expensive of all those described due to the state duty, which reaches 2850 rubles. But everything happens officially, through government agencies.

In any case, you will have to solve something with car registration plates that have become unreadable. If you give up on this problem and do nothing at all, then be prepared to pay a fine of about 500 rubles for erased numbers at any moment. Enrich a patrol officer several times and still take on the task of restoring the appearance of license plates

Complete replacement of signs

How to change license plates on a car if they are erased? To do this, you need to go to the traffic police, write an application, pay the state fee, and then get completely new license plates for the car.

This method is the most expensive of all those described above due to the cost of state duty. At the same time, its significant advantage lies in the fact that all actions take place officially, with the help of government bodies.

So, unreadable car registration plates require special attention . If this seemingly insignificant drawback is ignored, then the motorist should be prepared to pay a fine at any moment.

However, sooner or later, you will still have to start restoring license plates.

Video: What to do if your car license plate is erased?

Repainting procedure

Registration of changes in body colors is a step-by-step process that is carried out by traffic police officers based on the request of the car owner. Let's look at the procedure for how to repaint correctly.

Collection of documents

Before contacting the police to register changes, you should collect a package of documents. It includes:

• car owner's passport;
• PTS;
• insurance policy;
• car registration card;
• the receipt for payment of the state duty is 850 rubles.

According to the law, the payment amount includes the re-registration of the STS (500 rubles) and the entry of new data into the car passport (350 rubles).

Having arrived at the MREO, the driver will have to fill out an application and get in line. This application should be submitted to the appropriate window, where the car will be “checked” according to the database of stolen cars. Inspection is mandatory for foreign cars under 15 years old and Russian vehicles manufactured no later than 2015.

If the car is not stolen, the required stamp will be placed on the application. At this point, the collection of documents to repaint the car and formalize this change is considered complete.

Passage of the site in the traffic police

After checking the documents, the state traffic inspector will ask you to drive up to the inspection site. The police officer will check the VIN code and other identifiers on the body and in the title and make sure that these numbers were not painted over during the work.

Upon successful completion of the inspection, documents will be taken from the driver for renewal. In a few hours or the next day, depending on the queue, the car owner will receive his documents with new data on the color change.

Video: How to change the color of a car in documents

Ways to touch up a car sign

Any license plate of an ordinary car contains information in black on a white background. The white background contains paint that can reflect particles. And the black numbers are very easy to read. Therefore, we can conclude that only black numbers can be tinted without touching the white background.

How to tint a car license plate yourself? You can use a regular marker for this. But the marker must be permanent, which will not be washed off with ordinary water. You can carefully restore the numbers without touching or touching the white background with a black marker

What is important to do before painting the number? To begin with, the room is washed very well, then degreased and wiped dry. When purchasing a marker, it is best to choose a marker with a blunt tip.

In order not to touch the white background, you can substitute cardboard paper and only then paint on the signs. Of course, no one is immune from mistakes, so a marker can accidentally end up on a white background. To eliminate extra lines, you need to use a cloth that is pre-moistened in white spirit, that is, in a solvent. You can use soda instead. To do this, take a toothbrush, apply soda and erase unnecessary elements. But you need to be very careful not to remove some of the white paint along with the marker.

How else can you tint a car license plate? If time allows, and the motorist likes fairly painstaking work, then you can use paint. What should be done? First you need to cut out a stencil for those numbers and letters that need to be tinted. To do this, you can use transparent film or paper. After placing a stencil on the numbers, they tint the number. In this case, you can use a can of paint.

To get a stencil on film, you can simply apply the film and cut out the numbers. In the case of paper, you can use some kind of staining agent to stain the number itself. And then you just need to attach the paper and print the numbers, after which you need to cut them out.

The license plate must be prepared, as is the case with a marker. The sign is washed, degreased and wiped. Using fine-grained sandpaper, you can sand it a little. This preparation will help the coloring matter adhere better to the numbers. At the same time, you need to be careful while sanding so that the white background is not damaged.

A foam roller and paint is another option with which you can restore your room. Apply a little paint onto the roller so that it does not run off. Since the numbers themselves have a convex shape, you can carefully paint them using a roller.

When choosing paint, you need to consider the main thing: it should not wear off when exposed to water. It is also best to choose the simplest paint without unnecessary additives.

You may encounter difficulties such as background damage. But how to deal with this problem is also now clear. But it’s best to try not to touch this white background. Of course, if you have on hand the paint that is used to issue the license plates, then there’s nothing to worry about.

Is it possible to tint the license plate yourself?

You can tint the license plate yourself, but only if the requirements according to GOST are met. Here's what the law says:

• Numbers and letters must be the same height. When touching up, you must not allow the outline of one sign to go beyond the outlined limits.
• The white background should have a reflective coating and a protective hologram, so it is not recommended to touch it. A small scratch or chip can still be painted over. But if the damage is extensive, then it is better to order new numbers.
• Numbers and letters must be black and clearly outlined. This requirement is easy to fulfill if you take a permanent marker.

If you choose the right tools and a certain amount of accuracy, meeting all these conditions will not be difficult.

The numbers have been erased. What to do

The state registration number is a mini-passport of the car. Operating a car without license plates is prohibited and punishable to the fullest extent of the law. However, you can receive a significant fine even if the number is damaged, difficult to read, or placed in the wrong place. Automotive instructors will tell you what you can do if your license plates start to wear off.

Why are numbers erased?

There are a fairly large number of reasons that can cause the paint on registration numbers to wear off. But the three most common are: damage in an accident, initially poor workmanship (there is information about a whole batch of defective license plates that were erased in just a week) and physical impact with hard objects (deliberate, hopeless or accidental).

Some drivers deliberately damage license plates so that they cannot be read by video cameras.

Some people use special sprays, metal mesh or number frames for this.

Is it possible to tint the number?

This question worries many motorists, but even traffic police officers cannot give a definite answer to it. On the one hand, the number is a state document that cannot be corrected or changed.

On the other hand, if at least one letter or number is erased from the license plate, this will be grounds for receiving a fine from an attentive traffic inspector, and each time going through the procedure of replacing license plates or issuing duplicates is not a very bright prospect.

Ultimately, it is more likely than not to tint the number.

The arguments in favor of this opinion are as follows: firstly, the tinting procedure has nothing to do with changing or correcting the number, since only the existing information is restored, and the quality of its perception also improves. Secondly, there is not a single law or regulation that would directly prohibit such a procedure.

However, it is worth paying attention to the fact that after all procedures the number must comply with GOST R 50577-93

Technical side

When making a standard license plate, paint of two primary colors is used: white and black (with the exception of the flag). White plays the role of a background and has reflective properties. Using black, alphanumeric information is highlighted, which should be clearly readable on a white background.

You should never touch the white paint!

Any attempts to tint the background will lead to loss of reflective properties, that is, the number will not comply with GOST.

And this is an excellent reason for traffic cops to issue you a fine once again. But tinting letters and numbers with black paint does not have the same effect, so technically there is nothing illegal about it.

What to paint with?

There are as many options as there are types of black paint. You should not use non-waterproof types of paint, such as gouache or watercolor. You need to apply the paint very carefully, preferably with a thin brush. However, not everyone can draw perfectly straight lines while squatting in the yard, so the letters may turn out crooked, and the number itself can be splattered with paint, which will only completely ruin it.

In this case, many car enthusiasts consider using a black permanent marker to be the optimal solution.

The marker must be waterproof, permanent (these are indicated by the inscription PERMANENT), alcohol-based.

They are sold at any office supply store.

Some tips for touch-ups

• It is advisable to buy a marker with a thick rod, the end of which is cut at an acute angle.
• Before restoring the number, you should wash it in warm water with car shampoo and dry thoroughly.
• If possible, before touch-up, remove the license plates from the car and carry out the restoration in a well-lit, comfortable and dry room.
• To get straight lines, you can use a piece of cardboard or thick paper. It is substituted for letters that can be safely circled. The outline turns out smooth, and all excess paint remains on the cardboard.
• How long such a repair will last depends on the quality of the marker, but the updated numbers will definitely last at least a couple of months.

Alternative

In some cities there are companies that absolutely legally issue duplicate license plates. If no one in your locality has mastered this business, then you can go through the tedious procedure of re-registering a car with issuing new license plates or getting duplicates of old ones. To do this, you should contact the traffic police department at your place of residence.

If the number is damaged badly enough, then this is the only possible option.

Let's watch the video:

Have a good trip and indelible numbers!

The article uses an image from the website www.honda-nn.org.ru

Ways to restore the inscription

Before painting, it is necessary to prepare the numbers accordingly. The license plates are removed from the car and thoroughly washed to remove dust, dirt and bitumen particles. Then you need to cover them with masking tape in those places where painting is not planned. It is necessary to cover all white enamel, otherwise if black paint gets in, the number will no longer comply with GOST standards.

There are several main types of coatings that can be used for restoration.

Auto enamel

For tinting, you can use special automotive enamels and pencils, usually used to eliminate minor defects on the car body. The composition of such paints ensures good adhesion and resistance to precipitation and mechanical stress. You can use car enamels produced in the form of aerosols. Typically, this painting method is used for uniform application over a large area, for example for completely painting letters and numbers. In this case, at the preparation stage it is necessary to carefully paste over all white surfaces.

Nitropaint

Nitro paints are household car enamels used for painting wood and metal elements. Their use is also acceptable because they are water resistant and easy to apply.

Marker

The use of permanent markers is recommended. They are more stable due to the presence of alcohol in the composition. It is best to use markers with a thick tip and a beveled edge. This allows you to draw lines more evenly and accurately.

What to do if the license plates on your car are erased

What to do if the license plates on your car are erased?

Good afternoon, dear reader.

Over time, the state registration plates (numbers) of any car lose their original appearance. Under the influence of rain, snow, sand, dust, reagents and other factors, the black paint on the numbers gradually wears out and the numbers become unreadable.

Different drivers' license plates wear out differently. The degree of wear depends primarily on the operating conditions of the car, on the mileage of the car, as well as on the quality of manufacture of the plates themselves. For example, in the case of a low-quality batch, the numbers may be erased after the first rain. Such numbers are quite rare in practice. More often than not, numbers wear out, so to speak, from time to time.

Today we will talk about what to do if the license plates on your car have been erased. Let's get started.

Let's consider all possible options in turn.

Drive with worn out license plates

If a car owner is too lazy to deal with state registration plates, he can continue to drive with worn-out license plates.

In this case, the maximum fine is for an unreadable number. according to Part 1 of Article 12.2 of the Administrative Code, will be 500 rubles. The minimum is a warning.

Tint the numbers yourself

Self-tinting of license plates can also take place, but some features should be taken into account:

1. Since you are not involved in counterfeiting state registration plates, a fine cannot be imposed on you.

2. State registration plates must comply with the requirements of GOST R 50577-93. Those. When you independently tint the digits of the license plate, you must also take into account the requirements of GOST. If you wish, you can study the full text of this document. Here I will list only its important features.

Basically, GOST requirements concern the reflective (white) part of the license plate. It must be made using special paints. If it so happens that the white part of your license plate has been erased, then you should not touch up the plates yourself; it is better to use one of the methods below.

As for black numbers, there are no requirements for light reflection. Those. The numbers can be tinted, the main thing is not to spoil the white reflective part of the registration plate.

If you decide to paint the numbers yourself, I recommend that you first cover the white part of the number with masking tape and only then touch up the numbers. This will protect the numbers from damage.

Ideally, before painting, the plates should be removed, washed, dried, degreased, and only then applied with waterproof paint. In the simplest case, you can limit yourself to using a black waterproof marker without preliminary preparation. However, the durability will be appropriate.

The advantage of touching up car license plates yourself is that the procedure is quite cheap. The downside is that if you haven't done this kind of thing before, touch-ups can take a long time.

Production of duplicates of state registration plates

Another way to eliminate the lack of numbers is to make a duplicate of them. Currently, private organizations can legally produce license plates. The cost of producing one number is approximately 1,500 rubles, a set of two numbers - from 2,000 rubles.

To make duplicates, you will need a vehicle registration certificate. Usually duplicates are made fairly quickly, often within half an hour.

In some cases, this method remains the only possible one. For example, if the car's license plate was stolen or it was significantly damaged.

Changing vehicle registration details

There is another way to update car license plates - changing registration data. The essence of the procedure is that you go to the traffic police and receive new numbers.

Disadvantages of this method:

- high price. State duties in this case will amount to 2,850 rubles.;

— you irretrievably lose your old car number (if for some reason you value it, it is better to use the production of duplicates).

Thus, depending on the degree of damage to the numbers, you can use one of the following methods:

• let it be as it is;
• tint the numbers;
• make duplicates;
• change registration data.

Good luck on the roads!

Upgrade Tips

If you intend to tint the worn-out symbols of the license plate yourself, we recommend that you first familiarize yourself with the technology of a particular method in order to avoid mistakes and damage to the license plate. Let's take a closer look at several basic methods.

Spray painting

To restore the license plate, black paint in cylinders, used to eliminate defects in the paintwork of cars, is suitable. You can buy it at almost any auto store.

At first glance, it may seem that painting with spray paint from a can will be the easiest way, but this is not entirely true.

Let's look at the whole process step by step:

1. We thoroughly wash and dry the license plates; the area to be painted must be degreased. The final result will depend on the quality of this stage, since the paint will lie unevenly on a contaminated or non-greased surface.
2. We cover the number with masking tape so that the white background is completely covered and the letters have smooth outlines.

The complexity of this method lies in the fact that it will be extremely difficult to draw an even border between the white background and the outlines of the numbers. Usually a stationery knife is used for this, but in this case there is a risk of damaging the plate coating, which will subsequently lead to rust and corrosion.

Dipping Method

This method gives an even and clear boundary of the painting area, but requires a lot of attention and concentration, since there is a risk of completely ruining the number.

For painting, nitro enamel or other waterproof paint is used; the whole process can be divided into the following stages:

1. To obtain a high-quality result, it is necessary to thoroughly wash and degrease the working surface of the room.
2. Choose a flat board no smaller than the license plate size.
3. We wrap the board with thick fabric, stretch it and secure it with a construction stapler or nails.
4. The fabric on the board is generously wetted with paint; to obtain a good result, paint application must be uniform.
5. Take the prepared number and place it face down on the fabric. Since when the number is produced using the stamping method, the symbols and the edging of the sign are convex, only they will be painted.
6. Hold for a few seconds and carefully raise the number.
7. Dry the room in a horizontal position to avoid drips.
8. If necessary, the staining procedure can be repeated several times.
9. We repeat the entire process for the second license plate.

When using this method, you need to be aware that if you press too hard on the number upon contact with the fabric, the paint may also get onto the white fields of the sign. In this case, you must immediately remove excess paint using a solvent.

Restoration with a marker

The simplest way to restore a shabby number, while also having minimal financial costs. On the prepared surface of the license plate, all symbols are tinted using marker paint; excess strokes are removed with a cloth soaked in a solvent.

Causes of wear

Before we talk about what needs to be done if the license plate on the car is erased, it is worth touching on the reasons for this situation.

Wear is influenced by a number of factors, one of which is long-term use of the vehicle. It is also worth considering the conditions in which the machine is used. When the car is driven primarily in the city, the plates rarely wear out. But when a car is exposed to harsh conditions, the paint may not withstand such stress.

In order to somehow prevent rapid wear and tear, motorists came up with the idea of ​​​​using metal frames, inside which the number is placed.

A license plate can be erased for the simple reason that it was originally of low quality. This happens when production is not carried out by state enterprises, but by private organizations engaged in the creation of duplicates. Sometimes such signs cannot withstand even one trip in heavy rain or snow.

But it is important to note that such license plates are very rare. Therefore, the most common cause of wear is time

It is worth recalling the existence of a fine of 500 rubles, which is provided for driving a car with an unreadable license plate. This may be due to contamination or wear of the paint.

Is it possible to restore it yourself?

So, you have a situation where you need to restore your license plate because the paint on its symbols has rubbed off. There may be several reasons for this: from banal defects in the production of license plates to the consequences of physical impact.

Also, do not forget about the loads the front number plate is exposed to during the operation of the car - the abrasive effect of falling stones or sand, reaction with chemical de-icing reagents.

It is impossible to give an unambiguous answer to the question about the right to independent restoration, since it is not regulated by law:

1. On the one hand, the car number can be considered a state document, the independent modification or modification of which is unacceptable.
2. On the other hand, it is prohibited to operate a vehicle with unreadable license plates, and if this fact is discovered, the driver faces a fine for violating traffic rules.

If you look from the technical side, restoration within the framework of the established GOST will not be interpreted as a violation. According to GOST R 50577-93, clause 4.8, when making a number, white paint is used as a background and black paint to highlight the characters.

Moreover, the white background has a special coating with reflective properties. There are no strict regulations regarding the black paint used, so tinting the symbols alone will not be considered a violation.

Imposing a fine for a poorly readable state sign

The Code of Administrative Offenses of the Russian Federation contains several articles related to the presence/absence or condition of license plates.

Table 2. Responsibility for indistinguishable numbers.

As can be seen from the table, the lightest punishment is imposed for using numbers with unreadable characters. If you paint over the white background of the license plate with regular, non-reflective paint, or allow the vehicle to be used with license plates removed for restoration, then the penalty imposed will be much more serious.

During operation, the car inevitably receives small scratches, chips and other damage to the paintwork. In order for the car to always look new and fresh, car enthusiasts eliminate all these shortcomings, but do not always pay attention to the condition of the registration plates.

It is necessary to periodically check their appearance, since not only the aesthetic appearance of the car depends on this, but also compliance with current legislation.