Oil filter puller (overview of different types)

Surely every car owner who has at least once tried to change the oil on his own has encountered a problem when it is impossible to unscrew the oil filter. oil filter pullers for this . Currently, there are several varieties of filter pullers, 7 main types, which are the most used.

Filter unscrewing procedure

Let's review these pullers:

Cup puller (end)

The oil filter cup puller is a highly specialized tool . This fact is due to the fact that each such tool is designed to unscrew a filter of a certain diameter . Accordingly, such a puller cannot be used in different situations; it is designed to work only with a filter of the same diameter and design.

“Cup” pullers are a design that has several (8, 12, 14, 15, 30) edges. On the back of the cap there is a square recess for a universal mounting key. Some manufacturers produce “cups” with a hexagonal bottom. This allows you to also use a spanner wrench, which in this case is included in the kit.

When purchasing an end puller, pay attention not only to the diameter of the cap and the number of edges, but also to the size of the recess for the seat wrench (⅜, ½, and so on).

Oil filter cup puller (end)

As a rule, “cup” type oil filter pullers are sold in whole sets, in special suitcases, where keys of various diameters are arranged by number. This set of oil filter pullers is ideal for use in auto repair shops . Often, the kits include not only end pullers, but also other types of them - pliers, strip pliers, and others. Buying a set will save you a lot of money if you use the tool regularly. For example, you can buy a good set with 15-30 “cups” and corresponding keys for approximately 3-7 thousand rubles. While you can buy a separate puller for 300-800 rubles.

The main advantage of the cup oil filter puller is its ease of use. A properly selected tool will never slip, which can sometimes happen with other types of pullers. In addition, the “cup” allows it to be used in hard-to-reach places due to its compactness.

End cup oil filter puller

It has the shape of a bowl with internal edges and a certain diameter to match the size of the filter of a specific manufacturer or car model. Completely follows the shape of the oil filter, due to which it ensures reliable fixation - the possibility of deformation or damage to the filter is minimized. Fits on a 1/2 or 3/8 inch square ratchet, it is possible to use an extension or an open-end wrench. You can also use a 1/2″ x 3/8″ adapter for this work. The design of the puller allows you to unscrew and tighten the filter, observing the technical requirements of car manufacturers using a torque wrench. Manufacturing material: tool steel, chrome plating.

Minuses:

• The puller is not universal, it is used for a specific filter of one manufacturer or car model
• The need to use additional tools
• To select a puller, you need to know the size of the filter and the number of edges on it.

Oil filter puller “crab”

These pullers are of the universal type , since they can be used to remove filters of different diameters. Structurally, the puller consists of two plates, which are its body, between which three grips (“paws”) are mounted. They have notches that prevent them from slipping along the surface of the filter.

Crab filter puller

The “paws” are controlled by a clamping mechanism, the elements of which are located in the middle of the body, as well as between the rotary fasteners. For this, a socket or socket wrench is used, which interacts with a working tip extending beyond the body.

Working with a “crab” type oil filter puller is completely identical to working with a “cup”. However, the “crab” is more versatile, since it allows you to work with filters with different diameters . As a rule, the diameters are in the range 60...125 mm . “Crab” is perfect for working in confined spaces . The price of such a puller is in the range of 400-900 rubles.

Oil filter puller (overview of different types)

Almost every car owner sooner or later faces the problem of changing the oil. In this procedure, we will need to change the oil filter at the same time. Experienced car owners use filter pullers specifically. Now we will tell you which ones are most in demand.

First, let's talk about the cup puller: The filter puller, the so-called “cup”, refers to tools that are used in narrow specialties. This filter can be used to unscrew filters of the same diameter, that is, we will use it for only one filter. This filter has: Eight, twelve, fourteen, fifteen and thirty edges. On the other side of the cap there is a square-shaped opening. Most produce this filter with a 6-sided bottom. It comes with a spanner wrench. When you buy such a puller, you need to look at what diameter the cap has, as well as how many edges and what size the recess is. This filter has: Eight, twelve, fourteen, fifteen and thirty edges. On the other side of the cap there is a square-shaped opening. Most produce this filter with a 6-sided bottom. It comes with a spanner wrench. When you buy such a puller, you need to look at what diameter the cap has, as well as how many edges and what size the recess is. Typically, such pullers can be bought as a set; they are sold in small suitcases, the keys there are arranged from small to large diameters, each has its own number. This set is suitable for specialists who work in auto repair shops. It is included in the kit? -pliers, pullers, etc. Of course, by purchasing a kit you can save a lot of money. If you buy a set with thirty cups, then it will cost you approximately three to seven thousand rubles. A puller separately costs from three hundred to eight hundred rubles. This puller is very easy to use. If you choose the right tool, you will be satisfied; it is very practical due to its compactness. Filter puller "Crab".

With this puller you can remove filters of completely different diameters. Roughly speaking, these are two plates, and they are precisely the filter housing. This is a kind of imitation claw (gripper), with which the filter can be easily reached

The light bulbs operate using a clamping mechanism; its elements are located in the center of the body and in the space between the fastening elements. Here you need to take a socket wrench and a socket wrench; it will “cooperate” with the tip, which is located behind the body. “Crab” will help you work even in a small space. The cost of a puller is up to a thousand rubles. Chain filter puller.

Here the working function is performed by a metal chain; it can be of different lengths, as it is adjustable.
With its help you will learn how to dismantle and install the filter. Filter diameter from 60 to 140 millimeters. This is a kind of handle, at one end there is a chain. There is a double-row and a single-row chain. It hooks onto the filter, the other end is attached to the handle. The length that remains clings to the body and pulls towards itself. In general, the design of the puller is very simple; you can create it yourself. Belt puller
The principle of operation is very similar to the chain puller, but the gripping range is much larger. If you have a filter with diameters of, for example, 25 or 160 millimeters, then it will fit perfectly, not to mention intermediate sizes. The belt is attached to a steel rod. Now you can carefully put the key on and use it to unscrew the filter. Again, the advantage of this filter is its huge range. Even if the filter is very twisted, the filter will cope with its task. You can purchase such a puller for from 600 to 1000 rubles.

belt puller

Belt filter puller

This is a very popular and widespread model. The work is carried out using plastic and metal tapes. The handle is very firmly attached to the end, and a second strap helps adjust the length. This puller has a small range, up to 30 millimeters. Here you will have to exert a lot of effort (physical) because such a puller cannot unscrew very tightly tightened filters. The cost of a puller is from 200 to 600 rubles.

Puller pliers

Filter puller "pincer-shaped".

This is visually similar to ordinary pliers, and we can say that the operating principle is quite similar. This design consists of two jaws, they have notches. The sickle-shaped ones have a handle, and there is also another sponge, a working one, you can adjust it. With their help, the filter is carefully grabbed and unscrewed. The design is very simple. There is a minus - filters that are tightly twisted are difficult to unscrew. The cost of such a puller is up to a thousand rubles.

So which puller should you choose?

Practice says that the most convenient ones are a cup and a crab. They can be used in small spaces. Then chain ones. The most inconvenient are pincer-shaped and sickle-shaped ones.

Oil filter chain puller

The operation of such a puller is based on the use of a metal chain, the length of which is adjustable. With its help, you can remove and install oil filters with diameters in the range of 60...140 mm . Structurally, it consists of a handle on which a chain is attached at one end. It can be single-row (in most cases) or double-row. During operation, the chain covers the filter, its second end is fixed in the handle, in a special groove with a lock. The remaining length of the chain, if necessary, is attached to the hook on the handle body. By the way, making such a chain oil filter puller with your own hands is not difficult.

Chain type oil filter puller

There are also pullers designed in which the chain loop already exists, and it is simply thrown onto the filter for further work. The undoubted advantage of chain oil filter pullers is their reliability, durability and the ability to unscrew even tightly screwed filters .

Unfortunately, chain pullers cannot be used in confined spaces like the previous types. After all, to unscrew the filter, you need to turn the puller handle, and this is not always possible. The exception is chain pullers based on a metal head. Unscrewing here occurs using a socket wrench. The cost of a chain puller is 300-700 rubles.

Belt filter puller

Oil filter puller sets

As a rule, the kits include several universal pullers. As well as a set of inserts for unscrewing drain plugs. A knob and magnet may be present. The storage system is a tray or a durable plastic portable case. There are also sets of “cups” for most popular car models, which makes such sets universal.

The kits are used in vehicle service centers or small auto repair shops. If the puller from the set is worn out or damaged, it can be purchased separately. The design of the bowl-type puller allows you to unscrew and tighten the filter, observing the technical requirements of car manufacturers using a torque wrench.

Belt puller

The operation of a belt oil filter puller is similar to that of a chain puller, but has a large range of working diameters. So, with its help you can work with filters with a diameter of 25...160 mm . The working body in this case is a belt fixed in a square steel rod. Subsequently, a wrench is placed on it, which is used to unscrew the oil filter. The advantage of belt oil filter pullers is a wide working range , as well as the ability to work with tightly twisted filters. You can buy a belt puller for 600-1000 rubles, depending on the quality, manufacturer and place of purchase.

Belt puller

Belt filter puller

This is one of the simplest models. Its working mechanism is a metal or plastic tape, which fits into the handle at both ends. One of them is fixed rigidly, and the second allows you to adjust the length of the tape. At the same time, belt oil filter pullers have the smallest working range (about 30 mm) , so their use is limited. impossible to unscrew tightly tightened filters using a belt puller . You can buy belt pullers for 200-600 rubles.

Pincer type puller

Pincer and crescent oil filter pullers

Pincer pullers resemble standard pliers both in appearance and in the method of working with them. They are a construction of two working jaws with corresponding notches, as well as two handles. Crescent-shaped ones have one handle and two working jaws, one of which is adjustable. Accordingly, with their help you can easily grab and unscrew the filter. The advantages of these designs include simplicity of design. The disadvantages are the inability to unscrew tightly twisted filters , as well as work in hard-to-reach places. The cost of pincer-shaped pullers ranges from 500-900 rubles, and sickle-shaped pullers - 200-600 rubles.

Top 5 Most Popular Oil Filter Pullers

The table below shows the 5 most commonly purchased oil filter pullers.

Which oil filter puller is best?

As practice shows, it is most convenient to use “cups” and “crabs” . They allow you to work in confined spaces. Therefore, these types of filter pullers are considered the best. In second place are chain, belt and belt pullers. They are universal, but with their help it is impossible to work in places where there is no free space. In addition, they can be used to unscrew tightly twisted filters. And finally, the simplest are pincer-shaped and sickle-shaped pullers. They are inexpensive, but have many disadvantages. In particular, they are limited in diameter, and with their help it is impossible to unscrew tightly twisted filters.