07/17/2021 4,377 Fuel system
Author: Victor
The Chevrolet Cruze fuel filter is designed to filter gasoline used in the car. For any car owner, replacing the fuel filter is one of the priority tasks that must be performed during vehicle maintenance. We will tell you where this device is located, when it needs to be changed and how to replace it yourself in this article.
[Hide]
How to change the fuel filter on a Chevrolet Cruze: photos and videos
It appears that General Motors is somewhat overestimating the quality of our fuel, since they have taken virtually no measures to clean or replace fuel filter elements. This issue is pressing for many Chevrolet Cruze owners, since standard filters are enough for a maximum mileage of 150-200 thousand, and certainly not for the entire service life of the car.
Features of the fuel purification system on the Chevrolet Cruze
Fuel filter mesh.
Both of these filters are located in the same fuel module, and the module itself is located in the gas tank. The situation is complicated by the fact that the Cruise does not have a hatch in the floor of the body for servicing or replacing the fuel module . At the same time, the module contains fuel filters, a fuel level indicator sensor, a fuel pump and a pressure regulator.
When to change the fuel filter?
The instruction manual does not say a word about replacing filter elements , and service stations can charge at least 5 thousand for this work. That is why we will do everything ourselves.
Risk of untimely replacement
The filter replacement process is the same on both old and new cars. The company recommends that if any element of the fuel module fails, replace it as an assembly, but the situation with prices is as follows:
- branded module GM 135 772 30 costs at least 30 thousand rubles;
- an analogue from Bosch with article number 0580 2000 45 was estimated at 10-12 thousand;
- The Chinese module Cartridge costs 8-10 thousand.
There are several more substitutes, but their price is no less than the same 10 thousand. That is why it is easier and cheaper to replace even a filter element or a mesh with your own hands.
Fuel filter part numbers
GM doesn’t even offer a branded mesh, hinting that the entire module needs to be changed, but there are similar ones in design and configuration, for example, from Toyota Corolla or Mazda 6 at a price of 300 rubles apiece.
A paper filter element, for example Meyle 29-14 323 0004 or Delphi HDF623, costs in the range of 800-900 rubles complete with an o-ring. To replace, we will need a standard set of tools and filters.
Replacement algorithm for a Chevrolet Cruze
Let's take out this fuse!
To do this, look for fuse No. 20 with a rating of 20 A in the engine compartment mounting block and remove it. Then we start the engine and leave it idling until it stops completely.
The pressure in the system has been relieved, remove the module using the following algorithm:
- Remove the negative terminal from the battery.
- We remove the gas tank. To do this, unscrew the four screws securing the tightening clamps, having previously disconnected the hoses and wiring harness to the fuel module. Removing the fuel tank clamps.
- Unscrew the 6 bolts securing the fuel module.
6 bolts securing the fuel pump are marked with arrows - We take out the fuel module assembly.
Removed the fuel module! Let's pick! - We change the coarse filter without disassembling the module.
- If the module design provides a fine filter, unscrew the lid of the glass and take out the filter element.
Remove the cover and change the filter. - We change the sealing gasket and install a new filter element.
Let's change! - Assembly is carried out in reverse order.
Using this technology, you can quickly replace fuel filters on a Chevrolet Cruze with your own hands. Clean gasoline and sunny roads to everyone!
Source: https://carfrance.ru/toplivnyj-filtr-na-chevrolet-cruze/
see also
Audi spare parts - which ones are best to buy?
- 0 0 742
Original Renault spare parts. How to distinguish from a fake
- 16 0 7k
Which fuel filter is better
- 51 3 30k
Where is the fuel filter located on a Chevrolet Cruze?
- 0 1 5k
Fuel filter
- 0 0 67k
The fuel filter on the Chevrolet Cruze J300 (first generation) differs depending on the engine type. The location of the fuel filter also depends on this. The official supplier of original spare parts for the Cruze 1 is General Motors, but the main manufacturer is the German Hengst Filter.
On Chevrolet Cruze with gasoline engines, in addition to the main fuel filter, there is also a pump mesh (coarse filter). It is located in the gas tank and is attached to it from below.
Replacing the fuel filter on a Chevrolet Cruze
Experienced car owners know that replacing the fuel filter requires attention, since the performance of this element determines the quality of the ride. Today we will tell you where the Chevrolet Cruze fuel filter (or gasoline filter) is located , and what is needed to repair or replace it.
Where is the filter located?
Chevrolet Cruze cars do not have such an element as a fuel filter. The automaker considered it unnecessary to install it on their cars. More precisely, there is no filter itself, but there is a mesh that is responsible for filtering the fuel being refilled - it is called a fuel filter.
The manufacturer believes that the fuel pump is installed on Cruze vehicles for the entire service life. Therefore, its replacement is considered inappropriate. However, due to the low quality of gasoline at Russian gas stations, Cruze owners often need to replace the mesh.
The mesh itself is located in the fuel pump, which is located in the fuel tank. To get to the filter mesh, you will need to remove the back seat of your Chevrolet Cruze, then dismantle and disassemble the fuel pump.
How often do you need to change the fuel filter?
If you notice that:
- your car works intermittently, that is, it periodically stops;
- the car loses power when you press the gas pedal, “dips” are felt;
- the car has become less dynamic;
- when you press the gas sharply, the car begins to twitch;
then it's time to change the fuel filter.
"Tell! I purchased a new Chevrolet Cruze about two years ago. I drove without problems. But then suddenly the car began to run unevenly, and sometimes it wouldn’t start at all! I visited car repair shops and everyone advised me to change the fuel filter! I looked in the instruction manual, there is not a word about replacement. Where can I find step-by-step instructions for replacement?
There are plenty of questions of this kind on the Internet. And we have prepared this instruction especially for you. There are no specific terms for replacement, it all depends on the fuel you use, and if it is not of high quality, then replacement will have to be done much more often - after about 60 thousand kilometers.
If you have already covered this mileage, we recommend that you replace the fuel filter. Chevrolet96 car service specialists will make an appointment for you at a time convenient for you and perform a replacement.
Fuel filter replacement steps
If you decide to replace the fuel filter yourself, we suggest you read the step-by-step instructions.
Old and new fuel filter for Chevrolet Cruze
Preparation
To replace the fuel filter you will need:
- New fuel filter. You can purchase an original filter from Chevrolet or a domestic analogue, the choice is yours!
- A screwdriver with a slotted tip.
- Wiping.
Instructions
Before removing the fuel filter, it is necessary to relieve the pressure in the system. To do this, turn off the ignition and find the fuse box. It is necessary to remove the fuse that controls the operation of the fuel pump. Then start the engine and let it run for a while. When the car stalls, the pressure in the system will be released.
- To get to the fuel filter, which is located in the fuel pump, you will need to remove the rear seat. To do this, lift it with a sharp upward movement.
- When the seat is removed, you can see the fuel pump cover.
- Using your hands or a screwdriver, remove the fuel pump protective casing and remove the rubber seal.
- Disconnect the wiring harness from the fuel pump.
- Disconnect the pipes that carry gasoline into and out of the pump. To do this, use a flat-tip screwdriver: pry up the pipes and remove the clamps.
- Now unscrew the fuel pump cap.
- When you manage to unscrew the cap, take out the pump itself.
- On the fuel pump itself you will see connectors: they need to be disconnected.
- There are four latches on the fuel pump housing. They also need to be squeezed out.
- After releasing the latches, use a screwdriver to pry off the top of the fuel pump. It should come off without any problems.
- After completing all the above steps, you will see a filter mesh. If this was the problem with the incorrect operation of the engine, then it may not even provide clearance due to dirt, so it is better to simply replace the filter itself. Assembling the elements should be done in reverse order.
Video “Method of replacing the TF with dismantling the gas tank”
The video below shows another, more complex option for replacing a gasoline filter, with removing the tank (the material was filmed and published by the Auto Repair channel)
Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question
Was this article helpful?
Thank you for your opinion!
The article was useful. Please share the information with your friends.
Yes (100.00%)
No
X
Please write what is wrong and leave recommendations on the article
Cancel reply
Rate this article: ( 4 votes, average: 5.00 out of 5)
Discuss the article:
Chevrolet Cruze fuel filter: how to replace: step-by-step instructions and photos
But then suddenly the car started to stall, and sometimes it wouldn’t start at all!
Fuel pump for Chevrolet Cruze 1.8
In the place indicated in the picture, carefully pry it off with a screwdriver. So, I had to remove the tank. If this was the problem with the incorrect operation of the vehicle engine, then it may not even provide clearance due to dirt.
That is why we will do everything ourselves.
If the mesh is very dirty, you can clean it with cleaning products or replace it with a new one.
Choosing a fuel filter for a Chevrolet Cruze
It is better to carry out work in a ventilated area. Instructions First, it must be said that people often think that it is impossible to purchase a mesh separately, since it comes with a pump, but this is not so.
To do this, you need to remove fuse F16 in the engine compartment. After which you need to start the car and let it stall. Next, you need to remove the backrest of the seat in your car, lifting it up with a sharp movement. Once the seat is removed you will see the pump.
Next, you need to lift the casing and rubber seal. Remove connector 1 and connector 2 as shown in the figure. But you can’t find one like this, the most similar options are: Photo of the pump from Astra and the original one, respectively 3.
Having compared the output fittings, I sawed off the excess about a mm from Astrov pump 3. Next, I re-soldered the connector, slightly drilled out the glass axles that remained in the holes of the black filter with the fuel pump, assembled it and secured it with nuts.
Chevrolet Cruze gas tank
The height turned out to be a little higher than with the standard one, but that’s okay, the space there allows it. Then I rode for a week and the problem was solved! In the Chevrolet Cruze configuration, in the place where the fuel pump is installed, there must be a special key intended for dismantling the device.
Signs that the mesh is dirty and it’s time to change it
But if it is not there, then you can use improvised tools, namely a screwdriver and a hammer. When you have managed to unscrew the fixing disk, carefully remove it and pull the pump itself out of the mounting location.
On the fuel pump itself you will see connectors: On the fuel pump body you will also see four latches. They also need to be squeezed out. After releasing the latches, use a screwdriver to pry off the top of the fuel pump.
It should come off without any problems. Once you do this, you will see a filter mesh.
If this was the problem with the incorrect operation of the vehicle engine, then it may not even provide clearance due to dirt.
It is unlikely that cleaning this element will help you, so it is better to simply replace the filter itself. Reassemble the elements in reverse order. It is recommended to put all fasteners in a separate box to avoid installation difficulties due to loss of parts.
Remove the bolt securing the clamps that hold the gas tank. Holding the tank, remove the clamps.
For these purposes, it is advisable to use the help of a partner. He must hold the gas tank. Otherwise, there is a risk of damage to any element of the fuel system. Carefully lower the tank and unhook the remaining tubes and wires from it.
It is recommended to clean the hatch before removing the module. This will help prevent dirt and dust from getting into the tank. The danger of untimely replacement The process of replacing the filter is the same on both old and new cars.
The company recommends that if any element of the fuel module fails, replace it as an assembly, but the situation with prices is as follows: There are several more substitutes, but their price is no less than the same 10 thousand. That is why it is easier and cheaper to replace even a filter element or a mesh with your own hands.
Source: https://iaarus.ru/zamena/chevrolet-cruze-zamena-toplivnogo-n.html
Required Tools
In order to successfully replace the fuel filter in a Chevrolet Cruze with 1.6 (109 hp) and 1.8 (141 hp) liter engines, the car owner will need a set of tools, which is shown in the table below.
ToolsNote
| Jack or lift | You can park the car on the inspection hole |
| Medium hammer | To open the hatch cover |
| Bar | You can use a blunt nail |
| Screwdriver | With cross and flat blade |
During the process of replacing the fuel filter, a small amount of gasoline may leak out of the pump. It is also necessary to clean the hatch cover before opening it to prevent dirt and dust particles from entering the gas tank. For these purposes, you should use a rag.
Chevrolet Cruze where is the fuel filter located?
Experienced car enthusiasts know that attention should be paid to replacing the fuel filter, since the performance of this element determines the quality of the ride. Today we will tell you where the Chevrolet Cruze fuel filter (or gasoline filter) is located, what is necessary to repair it and replace the element.
Where is the filter located?
There is no such element as a fuel filter in Chevrolet Cruze cars. The developer considered it unnecessary to install it on their cars.
Or rather, there is no filter itself, but there is a mesh that is responsible for filtering the fuel being refilled. It can be conditionally called a filter.
Chevrolet Cruze car
The fact is that, according to the manufacturer, the fuel pump is installed on Cruze vehicles for the entire life of the car. Therefore, its replacement is considered inappropriate by the developer. However, due to the low quality of gasoline at Russian and Ukrainian gas stations, Cruze owners often need to change the filter element.
The mesh itself, as mentioned above, is located in the fuel pump, which, in turn, is located in the fuel tank. To get to the filter mesh, you will need to remove the back seat of your Chevrolet Cruze, and then dismantle and disassemble the fuel pump.
Car enthusiast Claudia thinks that if the fuel filter is in the fuel pump, it will be easier to get to it by lifting the car
How often should it be changed?
If you feel that:
- your car’s engine runs unevenly, that is, it periodically stalls;
- the car loses power when you press the gas pedal, “dips” are recorded;
- the vehicle has become less dynamic;
- when you press the gas pedal sharply, the car begins to twitch;
Replacing the Chevrolet Cruze fuel filter –
We are not talking about a compact hatchback, which is a complete copy of the Suzuki Ignis, but about the original development of General Motors.
Over the many years of production, the Chevrolet Cruze has been equipped with both gasoline engines and diesel engines. Nevertheless, cars with 1.0-liter gasoline engines have become widespread.
6 and 1.8 l. Using their example, we will consider replacing the fuel filter.
How often should I replace it?
General Motors regulates replacement intervals only for Chevrolet Cruze diesel models. The fuel filter must be replaced every 60,000 km or once every 2 years, but for the long life of the Common Rail system, it is better to reduce the frequency of replacement of the fuel filter for fine fuel purification to 15 thousand km.
On both gasoline and diesel engines, a clogged fuel filter can be recognized by the following symptoms:
- difficult engine starting;
- failures during sharp acceleration from low speeds (even short-term adjustments are possible);
- general loss of dynamic characteristics.
Choosing a fuel filter for a Chevrolet Cruze
The power supply system for gasoline units does not have a removable fine filter (it is tightly mounted into the fuel module and can only be changed when assembled with the fuel section). The system is also protected from dirt particles by the filter element in front of the fuel pump, but even this cannot be replaced separately.
Some Chevrolet Cruze owners get out of the situation by selecting a fuel pump from an Opel Astra (not similar to the original one, so it will have to be slightly modified before installation). Since the manufacturer does not regulate the frequency of installation of a new fuel pump mesh, the original article number for this part is not provided as such. You can only buy the fuel module assembly.
Replacing a Chevrolet Cruze fuel filter with your own hands is only possible using a barbaric method and using analogues (for example, Delphi HDF623). Therefore, we are able to demonstrate a method for completely replacing the fuel module and fuel pump assembly with a coarse filter.
In the case of diesel engines 1.7 and 2.0 TD, on which the CR system is extremely sensitive to fuel quality, only original filter elements should be installed.
Removing the tank
The TF on the Chevrolet Cruze is located in the fuel tank. The design feature of this car is that there is no access hatch under the rear seat cushion for access to the fuel section.
Required Tools
In order to successfully replace the fuel filter in a Chevrolet Cruze with 1.6 (109 hp) and 1.8 (141 hp) liter engines, the car owner will need a set of tools, which is shown in the table below.
| Tools | Note |
| Jack or lift | You can park the car on the inspection hole |
| Medium hammer | To open the hatch cover |
| Bar | You can use a blunt nail |
| Screwdriver | With cross and flat blade |
During the process of replacing the fuel filter, a small amount of gasoline may leak out of the pump. It is also necessary to clean the hatch cover before opening it to prevent dirt and dust particles from entering the gas tank. For these purposes, you should use a rag.
Chevrolet cruze how to replace fuel filter
Home Samodelkino Chevrolet Replacing the fuel filter on a Chevrolet Cruze. When to change the fuel filter. unstable engine operation. dips when you press the gas sharply, the car stalls.
If you decide to replace the fuel filter yourself, we suggest you read the step-by-step instructions. Old and new fuel filter for Chevrolet Cruze. Preparation.
! The most popular Chevrolet model is rightfully the Camaro. The history of Camaro begins in 1966. The name is taken from the word “Komrad” - comrade. The powerful car quickly conquered the market in this segment. The car turned out to be not only powerful, but also aesthetically attractive. It’s not for nothing that the Camaro is constantly seen in various films.
Chevrolet Cruze. fuel filter. alexx_vol. June 05 I replaced the spark plugs and the detonation and jerking went away. In winter, on a good road, I accelerated the car to 100 km/h. It runs great, and that was in 92nd.
Send a personal message to ilnar So, if you have decided to replace the fuel filter yourself, we suggest that you read the detailed repair manual. When the car stalls, the pressure in the system will be released. Control units, sensors and other spare parts. It is necessary to remove the fuse that controls the operation of the fuel pump.
Replacing the fuel filter on a Chevrolet Cruze | AutoZona54
Engine and exhaust system. Fuel filter for Cruise. Showing 1 to 4 of 4. Topic: Fuel filter for Cruise. Subscribe to this topic...
Good evening Kruzavody wanted to discuss the topic about the fuel filter on the Cruze, as I understand it, it doesn’t have one, with the exception of the one in the tank in front of the pump, I was thinking for a while about embedding the fuel filter into the fuel line in front of the fuel rail, but the problem is whether the pressure will drop on the highway.
Re: Fuel filter for Cruise. Message from Igor Kylosov. Don’t even think about brushing me off, you shouldn’t Hello everyone, I’m also confused about the fuel filter, I’m used to changing it during maintenance, but I took a Cruze and I can’t understand, it seems like it’s not there, only a mesh on the fuel pump, but ala op and exist .
Guys, what can you say about this????? Rules, news, announcements, portal operation. Portal news, portal work, development. Main conversation section about Chevrolet Cruze. Comparison of Cruze with other cars. News about Chevrolet Cruze. Photos, videos from Chevrolet Cruze. Photo from Chevrolet Cruze. Video from Chevrolet Cruze. Buying a Cruze on credit.
Cruze via Trade-In system. Leasing and Chevrolet Cruze. Instructions, manuals, manuals Chevrolet Cruze. Transmission, chassis, suspension, brakes. Ventilation and heating system. Sizes of standard tires and wheels.
Warranty, maintenance Cruze. Electronic systems in Cruze. Tires and rims. Warranty, running-in, maintenance of Cruze. Chevrolet Cruze in motorsport. Krasnodar region and Adygea. Stupino and South Moscow Region. Stores from partners of the Cruze club. Stores from Cruze partner candidates.
Chevrolet Cruze car market. Life outside the Cruze window. Construction, repair, home improvement. Our family and brothers are smaller. Job search and offer. Section for other cars. You cannot create new topics. You cannot reply to topics.
You cannot attach attachments. You can not edit your posts. Chevrolet GM hotline. Can you tell me at what stage you applied?
Auto repair shop SLOK - car repair I thought it would cost thousands, 45 is not so much. I had a valve body repaired for 1.8 years, mileage Cambodia, Angkor temples of Angkor Wat. Angkor city, construction took more than Check the high-voltage ramp if the engine is 1,
