Do-it-yourself tuning of Toyota Corolla 120 body: photo

The Toyota Corolla 150 has a stylish, elegant appearance, a comfortable interior and is equipped with a range of engines that provide sufficient dynamics for driving on the highway and in city traffic.

Wanting to give their car individuality and improve performance characteristics, car owners use various types of tuning.

Trunk-mounted acoustics

Exterior tuning

Conventionally, the modification of the car is divided into 3 parts:

• exterior – modification of the body, updating of optics;
• interior – making comfortable changes in the interior and using innovative technologies;
• a technical part, updating of which allows you to increase the power and dynamics of the car without excessive consumption of fuel.

Most owners of the 2008 Corolla 150 do not go further than body tuning. Having installed aerodynamic body kits, which are usually sold as a whole package, and also updated the optics, they prefer to leave everything that way. However, the presence of a fairing on the Corolla 2009, door sills, a bumper with smoothed corners or a spoiler on the trunk will already change the appearance of the car. But you can add a few more highlights.

How do you like this Corolla 150?

Masters from professional tuning studios rarely ignore the rims of the 2010 10th generation Corolla. It’s difficult to compete with them when it comes to modifying a car, but you can take some points into account. The original wheels are replaced with 16- or 17-inch products made of lithium or titanium alloy. Additional lighting under the bottom in the dark will give the car a mysterious and mystical look. There is a simpler option - these are paintable discs, onto which a marbled texture, rainbow stains or any other pattern are applied.

Unusual wheels for Corolla 150. Do you like them?

When using various accessories to tune the body of the Corolla 150 2011, you should know when to stop so that instead of modernizing the car, it does not turn into a laughing stock. Therefore, it is advisable to purchase ready-made kits to modify the exterior.

Conclusion

How do you like this Corolla 150?
Tuning the 2010 Corolla 150 will help improve dynamic performance and make its appearance more modern. After all, given the reliability, high maintainability and unpretentiousness of the model, it can serve for a long time. Therefore, by spending a small amount on car tuning, you can become the owner of a modern, powerful and unique car.

We improve headlights, safe movement on the roads

The life and safety of all road users depends on high-quality road lighting.

Experts recommend periodically replacing Corolla headlights if they become scratched or scuffed, as their presence will interfere with the clarity of the illumination. You can install exactly the same light sources as they were, but it is better to tune the optics on the 10th generation Corolla 2013.

Really beautiful opticsUpdating optics can be divided into several stages:

• Replacing light bulbs is the simplest and most affordable tuning option. Instead of conventional light sources, you should choose xenon or LED ones. For example, Led star is an excellent solution for replacing standard lamps with more modern lighting devices.
• Installing modules instead of the factory headlight. Modular optics consists of 3 types of sections: side lights, high beam and low beam. When choosing, you should pay attention to the manufacturer and equipment. The most popular modular headlights are eagle eyes, which come with a lens included.
• Protective decor that is attached to the lamp itself - a colored film that protects parallel glass from minor damage - or next to it, like eyelashes on headlights.

As you can see, tuning optics is both a full-fledged replacement with a better one, and an update of individual elements. After all, decorating brake lights and installing fog lights is only a small part of the changes that are suitable for “optimizing” the lighting fixtures on the 2012 Corolla 150. You can also use not transparent glass, but black sonar headlights, complemented by strips of daytime running lights.

Which optics do you like better, this one or the top one? Don’t forget about the rear lights of the 2011 Corolla 150, because traffic safety also depends on their condition. You can update your turn signals, headlights and brake lights with the help of depo LED headlights, made in a restyling style.

Interior tuning

Luxurious interior for Corolla 150 Refinement of the interior and interior decoration is aimed more at achieving travel comfort. Therefore, owners of the Corolla E 150 2012 seek to improve with the help of tuning:

• driver and passenger seats by replacing them with bucket seats;
• overview of the roadway due to the installation of modern design mirrors and a rear view camera;
• microclimate by updating the air conditioning or even climate control;
• information systems through the use of easy-to-read displays and displaying the display where it is convenient for the driver.

Actions:

• remove the strips located to the left of the radio;
• the same measures with a visor attached to clips;
• Unscrew the 2 bolts with a Phillips screwdriver of a suitable size and remove the panel, disconnecting the wires;
• carry out the analysis using a six-pointed star screwdriver;
• once the flimsy cover is removed, remove the structure from the frame;
• using a star polyhedron, unscrew 6 bolts: they hold the displays;
• remove the arrows sitting on the pins by prying them up with a screwdriver from below and marking the ends of the places with masking tape;
• Unsolder the old diodes by heating the soldering iron tip to 400 degrees.

• solder in their place - new ones;
• check the functionality using a tester: the beeper mode will satisfy your desire if, when you touch the ends of the device, you see that the diode lights up;
• if desired, re-solder the 3216 diodes on the displays;
• assemble the panel, install it in the car and enjoy the new glow.

Interior modernization - the simplest solutions

Replacing the owners of the Toyota Corolla in the back of the E 150 2013 with modern materials used by manufacturers is also tuning. When modifying the interior, motorists use:

• updating the casing to a more expensive and high-quality one;
• improvement of sound and noise insulation;
• installation of LED lighting in the doors, glove compartment, under the seats;
• use of a more informative dashboard.

Don't forget about the floor mats in the Corolla 150 car, as they provide comfort for your feet, especially in wet weather. But the design and their quality already depend on the choice of the owner. Rugs with high sides and a special pattern for the seats better protect the floor from dirt.

You should also pay attention to the material of the products. Rugs made of wool or thick fabric retain heat well in winter and cool in summer. But in wet weather they quickly get wet. The best option for those who do not have access to 2 sets of floor mats is polyurethane products.

Electronics

• Android interfaces 1
• Car alarms 5
• Accessories for car alarms 2
• Parktronics 6
• Additional equipment 2

• Car alarm Pandora DX-4GL with auto start

  The Pandora DX-4GL car alarm is a more affordable version of Pandora...

  14,500 rub.

• Car alarm StarLine A96 BT with auto start

  StarLine A96 BT (2CAN+2LIN GSM GPS) is a modern security and telematics complex with…

  RUB 24,600

• Car alarm StarLine A93 with auto start

  StarLine A93 (2CAN+2LIN GSM ECO) is a modern security and telematics complex with a proprietary…

  RUB 13,400

Engine improvement

You can upgrade the dynamic characteristics of the Corolla 150 by changing the settings in the electronic control unit. Otherwise, this procedure is called chip tuning or flashing. Such engine modification helps the 10th generation Corolla:

• increase the power of the unit;
• improve dynamics, since torque, maximum speed and acceleration are higher;
• save fuel;
• get smooth operation of the automatic transmission;
• speed up accelerator response;
• at the start, minimize failures or get rid of them altogether;
• get smooth and dynamic acceleration.

We worked on the technology in the Corolla 150. But not every motorist can independently flash the ECU, since such a procedure requires special knowledge and skills. It is recommended to perform tuning of the Corolla engine in the E150 body at a specialized service, so as not to provoke the occurrence of malfunctions due to your own incompetence.

However, there is a mechanical option for upgrading the Corolla 2008 engine. This is replacing the standard filter with a part from the sports version. The result is a change to a straight-through exhaust, which leads to an increase in power.

Weaknesses of Toyota Corolla 2006-2013 release

• "Robot"; • Problem areas in the suspension; • Steering rack; • Water pump (pump); • Bendix starter.

Now more details...

It is the “robot” in Corollas of this body that causes many problems. Therefore, before purchasing, it is imperative to weigh the pros and cons when choosing a car of this model with a robotic gearbox. “Kicking” and jerking when switching give a signal that the operation of this unit is disrupted

If you do not pay attention to this, then one of the following situations is possible - the neutral gear will engage and the gear icon will light up on the instrument panel. And accordingly, this means the “end” of the “robot’s” life

And it is important to remember that if the “robot”, like another box, fails, you will have to pay a decent amount of money. If the choice fell on a car with a “robot”, then it is very necessary to seriously assess the condition of the box

In general, we can say that the suspension of this Toyota model is difficult to reduce to a deplorable state. But there are weaknesses here too. First of all, these are stabilizer struts and bushings

These are not critical faults that appear in the region of 78-80 thousand km, but it is worth paying attention to them

One of the common problems with Toyota Corolla is the steering rack bushing. The bushing itself is plastic and wears out quickly, as can be evidenced by knocking on the steering wheel when driving even over minor road unevenness. However, the steering rack itself does not pose any problems and can serve for a long time.

One of the troubles can be caused by the starter bendix.

But it is important to remember the peculiarity that this happens en masse only when the mileage approaches one hundred thousand, but there have been cases at 50-60 thousand km. Signs of a bendex malfunction are: the car starts every once in a while or a whirring sound without cranking with the flywheel catching

This breakdown occurs within 100 thousand km. vehicle mileage. Considering that, according to statistics, the 10th generation Corolla, even the latest years of production, should already “run” in the region of 80-100 thousand km

You need to pay attention to this when purchasing. A characteristic sign that the pump is approaching the end of its life is an unpleasant noise coming from under the hood.

Disadvantages of the 10th generation Toyota Corolla

• Crickets in the glove compartment area; • Gentle paintwork; • Weak standard speakers; • Poor sound insulation of the front wheel arches.

Conclusion.

In general, we can say that the Toyota Corolla has more positive aspects than weak points and shortcomings. The main thing before purchasing is to decide which engine and gearbox to buy the car with and to take the check and inspection of the car upon purchase with full responsibility. Remember that better diagnostics of the car you are buying can be done at specialized car services, which in the future will help you save a decent amount of money to eliminate breakdowns and malfunctions caused by the previous owner.

Body tuning

What makes a car stand out the most in traffic is its body tuning. It is always visible to other road users. The aerodynamic body kit is widely popular. It gives the Toyota Corolla 150 a sophisticated look and emphasizes the modernity of the car.

A spoiler, if installed correctly, will not only improve the appearance, but also improve handling when driving at high speed. It is attached to the trunk lid. Self-tapping screws or sealant can be used to secure it. The price for a wing starts from 1,500 rubles.

There are stock elements for the rear bumper. The trim and deflector add an aggressive look to the rear end. The body visually becomes lower, and the sedan takes on a sporty style.

The cost of such modification is from 3000 rubles. The photo below shows an option for upgrading the rear of the car.

Another body styling option is the installation of side trims. They protect the lower part of the car from dirt and add aggressiveness to the appearance of the Corolla 150. Installation is carried out using standard mounts, so modifications are not difficult to do yourself. The cost of such tuning is from 1800 rubles.

Airbrushing makes a car stand out among similar models. The cost of applying a drawing depends on its size and level of the artist. Usually the price starts from 500 rubles and can reach 100 thousand rubles.

The installation of parts from restyled versions of the Corolla 150 is very popular. These spare parts can be purchased at many auto stores. The radiator grille is also subject to tuning.

Very often, in addition to it, a mesh is installed. Window visors are no less popular. The cost of installing new elements starts from 350 rubles.

A little background

In 2011, the Toyota Corolla E150 was considered the most modern car, but already in 2012 a new generation E160 appeared. Of course, the restyled version of the 150th body was produced until 2013, but this buyer interest, as expected, spread to the 160th. This situation became the impetus for the development of tuning for the X generation Toyota Corolla. Yes, we can say that various kinds of decorations and accessories appeared almost simultaneously with the release of the first 150th model. Nevertheless, the fantastic growth in the number of tuned Corollas on the roads began precisely during this period.

Upgrading the Toyota Corolla 150 is very easy to do with your own hands. Perhaps this is one of the most serious advantages of a car over its competitors, especially in the used car market. The possibilities for tuning the exterior and interior are incredible.

Body kits, optics, radiator grille, wheels - the body can be changed almost beyond recognition.

The same applies to the interior, which is complemented and modified by various kinds of accessories, as well as technological solutions (in particular, electronics).

It is worth noting that many of the additions carry not only an aesthetic, but also a functional component. Most body kits help improve the aerodynamic parameters of the car. A decorative cover on the engine, among other things, helps prevent damage to engine parts. Improved interior upholstery increases noise insulation properties and also extends the time that the driver and passengers can spend on the road. There are many ideas, the main thing is not to be afraid to experiment.

This is interesting: What to do if the battery light comes on: instructions

Suspension tuning

The Corolla 150's suspension is renowned for its reliability. It has characteristics that satisfy the average owner. Still, some drivers subject the suspension to tuning in order to adjust it to their needs.

The use of spacers will cost the owner from 350 rubles. At the same time, installation of air suspension can exceed 120 thousand rubles.

Table - Corolla 150 suspension tuning.

Modernization of optics and installation of backlights

Most often, optics tuning affects headlights and taillights. The installation of xenon and LEDs is widely popular. The cost of such alterations ranges from 5 to 20 thousand rubles.

The use of LEDs in opticsThe film sticker on the headlights gives the car exclusivity. At the same time, there is a practical side to such tuning. The surface of the optics is less exposed to external influences, which avoids scratches and other damage.

The lights look impressive at night. LEDs and neon lamps are mounted in the underbody, hood and trunk lids, and wheel arches. It is also possible to illuminate not only from the outside of the car, but also from inside the cabin.

Using backlights for tuning.

Toyota Corolla e150 is a sedan model of this series produced in 2008. Considering the fact that Japanese manufacturers produce new Corolla cars every year, modifications released years earlier quickly become outdated. Maybe for some it is a solution to the issue of a new purchase. But is it worth it when it’s enough to tune an old car? This is a cheaper option that will not only make the appearance more aesthetically pleasing, but also improve the technical characteristics.

Conventionally, any passenger car can be divided into three main parts: engine, body and chassis. The body includes such parts as doors, hood, trunk lid, radiator trim, mud flaps and other additional elements of the car's appearance.

What can we change in our car ourselves? Let's consider only tuning, which is needed not so much for the aesthetics of the body, but to solve the issue of necessity:

1. Replacing simple headlights with higher quality xenon ones as a more durable, economical option.
2. Installation of high pressure headlight washers to protect against contamination.
3. Installation of protective fender liners to improve the aerodynamics of the car and increase the service life of the body.

Toyota Corolla body

In addition to improving the driving characteristics of the Corolla, they are tuning the appearance of the car. The car is repainted in bright colors, while changing the color structure: glossy cars are made matte or painted in paints that change shade depending on the angle of lighting. During external tuning, a Toyota Corolla is covered with protective and decorative films, and airbrushed images are applied to the sides of the car.

To give the car a sporty appearance, the following auto-tuning of the exterior is carried out:

• Standard bumpers and sills are replaced with aerodynamic body kits, the hood and doors of the car are replaced with similar parts made of carbon fiber or carbon fiber.
• Additional air collectors, a hood deflector, and a spoiler with LEDs acting as brake lights are installed.
• Installing fender liners will increase the level of sound insulation of the Corolla and will not allow dirt to get into the arch.
• The car's rims are replaced with cast or titanium ones. 16- and 17-inch models are popular among drivers. The bottom of the car and the space under the radiator grille are illuminated with LEDs.

When externally tuning a Corolla, the standard optics are also replaced. The headlights are changed to brighter and more beautiful ones: xenon is installed, LED running lights are installed, and fog lights are installed independently. When tuning optics, drivers use “angel eyes” type headlights. The rear optics are tinted, bright LEDs are installed instead of lamps, and during tuning the shape and “light pattern” of the headlights are also changed.

Installation of xenon lamps

Replacing standard optics with xenon headlights improves the quality of road illumination at night and in poor visibility conditions. In addition, the appearance of the car improves. During operation, due to temperature changes, dust, dirt, small stones and branches, the headlight glasses become cloudy.

When tuning the standard optics of the Corolla e120 and e150, they use Depo brand xenon headlights.

Toyota Corolla E120-E150 is equipped with high-pressure washers for headlights.

Installation process of xenon headlights

The cost of one set of xenon lamps for tuning starts from about 8,000 rubles. You can find more expensive options. The set contains a special block suitable for the polarity of Toyota vehicles. It is not recommended to buy xenon lamps of a different polarity for tuning, since a different set may not last long.

For convenience, the car is driven into a pit. Then the boot is unscrewed. You should carefully examine the plane of the body, where there are holes with a diameter of approximately 8 millimeters; two of them need to be used. Through these holes, the low light units and fog lamps are fastened. The work requires a delicate approach, since there is a high probability of dropping the bolt for attaching the bracket with blocks.

Tuning of xenon lamps is carried out according to these instructions:

1. According to the diagram, you should make brackets for the side members, taking into account that the top point of the bracket should be under the headlight with a gap of 2-3 mm, but not lower or higher, since it will not fit into its place.
2. After the brackets are made, they are fixed to the blocks.
3. Next, the wires are connected to the sides, which is not difficult.
4. Choose xenon on a website or in a store selling car parts carefully. The IPF hid XD41 model is suitable for the Corolla 150. It is advisable to buy two sets, for use and for stock. Xenon wires are long. The wiring is equipped with a 15 amp fuse, which is perfect for cars. If we talk about the blocks, we note that they are housed in a good casing made of high-quality plastic. The wiring is well insulated and ready for immediate assembly.
5. The blocks are connected to the system. Then the lamps installed instead of halogen are replaced. For those who are doing xenon tuning with their own hands for the first time, it is not easy to do such work, but it is possible using the instructions for use. To begin with, the bumper is unscrewed and removed, then the headlights are removed and the xenon is carefully inserted. After the headlights are installed in the optics, the fog lights should be inserted. And everything is assembled in reverse order. There is nothing complicated, but you will have to tinker.

The installation of lamps is done with extreme care, leaving no traces of grease or lint on their surface. If there are such marks, they are wiped with a soft cloth. Thus, you will get white light, which is much nicer than yellow, and its power is stronger.

Installation of high pressure washers

Why are washers a necessity? In inclement weather or when snow melts, the headlights sometimes become so splashed that the driver has to stop to clear them, otherwise the road simply cannot be seen. As follows from the description, washers increase driving safety at night.

READ MORE: Tuning a Toyota Corolla 120 body In an auto shop, you can order a similar mechanism in several options:

• low pressure washers with headlight wipers;
• High pressure washers for cleaning headlights with a jet of liquid.

The first mechanism on the Toyota Korola 150 brand repeats the work of wipers and glass washers. The second device is more effective: a stream of water is directed onto the entire surface of the “lights” using a special nozzle. The high pressure washer device consists of the following components:

1. Pump to create the required pressure.
2. Water tank.
3. Connecting hoses.
4. Injectors.
5. Control block.

The tank is a small reservoir for water needed to clean the headlights. The main washer reservoir and an additional part are used, which is fixed immediately under the hood or bumper of the Toyota Corolla body. This part is not included in the kit and will have to be purchased separately.

Pump - creates the required fluid pressure. The operating principle is similar to the pump that works to clean the windshield. To drive the pump, control signals are sent to it.

Connecting hoses - ensure the operation of all connecting units. The only thing is that the owner of the Corolla 150 needs to select the minimum hose length for this part of the body.

Nozzles - the reliability of the headlight washer depends on this component, since the main function of the nozzle is to determine the direction of the jet. In this case, nozzles for a spherical bumper are selected, since this is the type that the Corolla 150 model has. Using the latest technology, a telescopic version of the injectors is made; they are hidden under the car bumper, so only their cover is visible. When they are installed, the overall appearance of the 150 model’s body remains virtually unchanged.

Telescopic nozzles extend according to a signal transmitted by the control unit using a hydraulic piston. Water is sprayed onto the headlights, after which the mechanism removes them again under the bumper.

Control unit - you can use various methods, but the most effective choice is a button on the steering wheel that sends a signal through a relay to the pump. This is how arbitrary control is carried out, working autonomously from the headlights. READ MORE:

Tuning a 2014 Toyota Corolla car You can install injectors on a Toyota Corolla 150 with your own hands, following the manufacturer’s instructions. However, remember that you need to look for a water tank in advance and determine a place to mount it. Otherwise, installation of an additional pump will be required. Sometimes for tuning you have to temporarily remove the plastic bumper of the 150 model for correct installation.

Using a headlight washer itself is almost no different from using a windshield washer. Follow these rules if you want the mechanism to work as long as possible:

1. Clean water or a special liquid is added to the reservoir. If debris or dirt gets in, the water outlet holes become clogged and instead of the required amount, a weak stream is released, which does not provide much of a cleaning effect.
2. For better cleaning, a special agent is added to the water.
3. In winter, it is advisable to add antifreeze.
4. Turn on the washer periodically even in dry weather. This will extend its service life.
5. Sometimes you should check the fastening of the components.

Changing brake discs

When making modifications to the design of the Toyota Corolla, the brakes are tuned. This is due to the fact that the standard braking system may not withstand the increased load on it after increasing engine power and replacing the suspension. To change brake discs on a Toyota Corolla, use the following set of tools:

• Spanners.
• Compression bottle.
• Jack.
• “Shoes” necessary to secure the wheels in a stable position.
• Solid oil and machine oils.

To replace brake discs on a Toyota Corolla, the following measures are taken:

• Brake fluid is pumped out of the cylinder. A syringe is used for these purposes. When tuning a Toyota Corolla, you can save a little on buying new brake fluid. However, the old one can only be used if it has not lost its transparency. The technical liquid is poured into a clean and dry container and covered with a lid.
• Stops are placed under the rear wheels of the Toyota Corolla. The “boots” secure the raised car body. Next, proceed to dismantling the front wheel. To increase the stability of the car, the front part of the Toyota Corolla e120 or e150 is fixed with bars. This is necessary to comply with safety regulations: if you do not use additional stops, there is a risk that a car falling off the jack will crush the driver during work on replacing brake discs.
• After completing the preparation, they proceed directly to tuning the car brakes. The caliper bolt is unscrewed from below, it is lifted and turned on the upper bolt, and then fixed with wire. In some cases, it is difficult to turn the caliper: to do this, slightly unscrew the bolt located on top.
• The linings are removed and the lower bolt is finally dismantled, the caliper is disconnected from the fastening element. As a result, the part remains hanging on the cord.
• The steering wheel is turned towards the removed wheel, then the fasteners (bracket) are unscrewed.
• The freed mounting holes are cleaned of dirt and dust, degreased, and bolts of the M8 modification are screwed into them.
• A new brake disc is put on the wheel hub, then the mounting bracket is screwed on.
• The bolts are lubricated.
• The brake piston is lowered into the cylinder.
• Return the steering wheel to its original position.
• Screw the wheel and lower the jack. Remove the front bars.

Subsequent brake discs are replaced in a similar manner. After tuning is completed, the container is filled with brake fluid and air is pumped into it to create compression.

When tuning a car's brake system, the factory calipers are replaced with parts made of ceramics. They are not cheap, however, their use increases the braking ability of the car in critical situations on the road, and the wear of the brake disc is reduced by 80%.