Hi all! The first thing we change in a new car (newly purchased) is, of course, the filter. I changed the air and oil filters. I don’t think anyone will have any questions here. Everything is simple and easy.
And with cabin filters (there are 2 of them) you need to be a little smarter. I already read that someone cut them, but they didn’t fit. So I had the same problem.
So, let's begin. First we remove the glove compartment. I couldn't find instructions on the Internet. I had to figure out how to remove it myself. It turned out to be very simple! You just need to pull it out of the lower mounts. I bent them a little with a flat screwdriver and pulled them towards me. And then it just comes out.
Removing the glove compartment
- Here's what's inside:
Inside the glove compartment
Remove the lid - bend the lower latches. Under the cover are our filters.
Old filters
We take out the filter. Pull the top one towards you, the bottom one slightly up and towards you. Here they are - dusty, dirty old cabin filters.
Dirty filter
I blew out the place where the filters were, and also blew out the heater radiator. I blew dust, birch leaves and other debris out of there.
Blown heater radiator and the area around it.
I blew it out with a blow gun, but it was short and didn’t fit anywhere. Then I took a Movil gun from the same set and blew it everywhere.
Blow guns
- And these are the new filters
New filters
- This is what is written on them
Filter brand
- Comparison: new and old filter:
Comparison of new and old filters
We insert new filters. Oops! Not so! New filters are bigger! Both in length and height a little!
Filter difference
I had to saw off the excess. As you can see in the photo, it was necessary to cut right along the stiffening ribs, which is what I did. The plastic is soft, so I accidentally sawed off the holder on the second filter (which you need to pull when removing it). It's OK. On the old one, too, one thing was cut down.
Source: https://www.drive2.com/l/517163816413299345/
Replacing the KIA RIO cabin filter
Good day everyone! This article will provide detailed instructions for replacing the Kia Rio cabin filter . The procedure is very simple and takes no more than 5-10 minutes.
If desired, absolutely any car owner can do it. Yes, you will spend a little time, but you will save your money. If you save money, consider it earned. So let's get started.
But first, as usual, a little theory.
What types of cabin filters are there for KIA RIO?
Cabin filters for KIA Rio come in two types - simple and carbon. Simple filter elements are designed to clean the air entering the cabin from dust, dirt and other particles.
Carbon filters provide better air filtration, trapping not only dust and large particles, but also prevent unpleasant odors from outside from entering the cabin. Therefore, it is more preferable to use carbon filters. Although for the pleasure you will have to pay 30-40% more than when buying a simple filter element.
When do you need to change the Kia Rio cabin filter?
The cabin filter of Kia Rio 2010, 2012, 2013, 2014 must be replaced twice a year - before winter and before the start of the summer season. Before winter, the cabin filter is changed so that the windows in the car do not fog up and the climate control works as expected.
But there is one subtlety. The filter needs to be changed after the weather has settled, i.e. There was frozen mud and slush on the roads. This is important because during this period of time the filter constantly becomes damp, freezes, thaws, and this significantly impairs its throughput.
In summer, the filter element is changed after the road has dried. This is done for the same purpose as replacing the cabin filter before winter. But keep in mind that you should not wait for winter or summer to replace the cabin filter on a KIA RIO. If you begin to notice that the windows in your car begin to fog up very often, and the air conditioner, stove or climate control do not really work, then it is better to change the filter immediately.
Instructions for replacing the cabin filter on a KIA RIO
To work, we only need a new cabin filter and 5-10 minutes of free time. Open the glove compartment and remove all contents from it.
We unscrew the plastic plugs located on the right and left inside the glove compartment counterclockwise.
The glove compartment will drop down, opening access inside to the cabin filter housing.
Now we need to press the clamps and pull the cabin filter plug towards us. After that, we take out the old cabin filter.
We install a new one in place of the old cabin filter. Pay attention to the direction of air flow. The arrows on the cabin filter should point straight down. We assemble everything in the reverse order: put the cabin filter plug in place, install the glove compartment latches.
That's all! Replacing the cabin filter on a Kia Rio is now complete. Thank you for your attention. I hope this article is useful!
Source: https://oils-market.ru/articles/a.65.html
When to change, what interior to install
To perform scheduled maintenance operations, there are regulations, as well as manufacturer recommendations. According to them, replacing the cabin filter of the Kia Rio III QB heating and air conditioning system should be done every 15,000 kilometers or once a year.
Considering that the operating conditions of the car in most cases will be far from ideal, experts advise performing this operation approximately twice as often, in spring and autumn.
Characteristic symptoms:
- Windows often fog up;
- the appearance of unpleasant odors in the cabin when the airflow is turned on;
- deterioration of the stove and air conditioner;
They may make you doubt that the filter element is coping with its tasks and an unscheduled replacement will be required. In principle, these symptoms should be relied upon when choosing the correct replacement interval.
Suitable sizes
When choosing a filter element, owners do not always use products recommended by the car manufacturer. Everyone has their own reasons for this, some say that the original is unreasonably expensive. Some people in the region sell only analogues, so there is a need to know the sizes by which you can subsequently make a selection:
- Height: 15 mm
- Width: 189 mm
- Length: 210 mm
As a rule, sometimes analogues for the Kia Rio III QB may be a few millimeters larger or smaller than the original, there is nothing wrong with that. And if the difference is measured in centimeters, then of course it’s worth looking for another option.
Selecting an original cabin filter
The manufacturer recommends using exclusively original consumables, which, in general, is not surprising. They themselves are of good quality and are widely available in car dealerships, but their price may seem overpriced to many car owners.
Regardless of the configuration, on all third-generation Kia Rios (including the restyled version), the manufacturer recommends installing a cabin air filter with article number 97133-4L000 (971334L000). Sometimes, instead of a filter, a mesh with number 97133-0C000 is installed; of course, it does not protect from dust, but only from debris getting into the impeller.
It is worth noting that sometimes consumables and other spare parts may be supplied to dealerships under different part numbers. Which can sometimes confuse those who want to purchase an original product.
When choosing between a dust and carbon product, car owners are advised to use a carbon filter element. This filter is more expensive, but it cleans the air much better.
It is easy to distinguish - the paper filter accordion is impregnated with a carbon composition, and therefore has a dark gray color. The filter cleans the air flow from dust, fine dirt, germs, bacteria and enhances the protection of your lungs.
Which analogues to choose
In addition to simple cabin filters, there are also carbon filters that filter the air more effectively, but they are more expensive. The advantage of coal SF is that it does not allow foreign odors coming from the road (street) to penetrate into the car interior.
But this filter element also has a drawback - air does not pass through it well. GodWill and Corteco carbon filters are of fairly high quality and are a good replacement for the original.
However, in some retail outlets the price of the original third-generation Kia Rio cabin filter may be greatly inflated. In this case, it makes sense to purchase a non-original consumable item. In particular, cabin filters are considered quite popular:
Conventional dust cabin filters
- Mann Filter CU21008 – high-tech consumables from a well-known manufacturer
- BIG filter GB-9971 – popular brand, good fine cleaning
- RU54 CF-931 – Russian manufacturer with an affordable price
Carbon cabin filters
- TSN 9.7.872 – high-quality and thick carbon coating
- BIG filter GB-9971/C – activated carbon
- Nevsky filter NF-6348C – normal quality, affordable price
It makes sense to take a closer look at the products of other companies - they also specialize in the production of high-quality consumables for passenger cars:
- Corteco
- Filtron
- SCT
- Sakura
- GoodWill
- Fram
- JS Asakashi
- Champion
- Zekkert
- Masuma
- Nipparts
- Purflux
- Knecht Mahle
- Nevsky filter
It is quite possible that sellers may recommend replacing the Rio III QB cabin filter with non-original cheap substitutes with a much smaller thickness. They are not worth buying, since their filtering characteristics are unlikely to be at the proper level.
How to replace the cabin filter on a Kia Rio?
The cabin filter is designed to clean the air coming from outside from dust, small particles of dirt, foreign odors and volatile substances. Thanks to it, a comfortable microclimate is created in the car interior.
To maintain it, regular replacement of the 2013 Kia Rio cabin filter is necessary. Any car enthusiast can change it with his own hands.
This article will help you understand why you need to change the filter, where it is located, and how to perform the procedure correctly.
Manufacturers of 2010-2013 Kia Rio cars recommend changing the cabin filter after 15 thousand kilometers under normal operating conditions. If the machine is constantly located in conditions of large accumulations of dust, in a metropolis, then replacement can be done once every six months.
Why change?
The main function of the filter element is to clean the incoming air from dirt and dust particles. Over time, its throughput decreases, air circulation in the cabin worsens, humidity rises, and the windows begin to fog up.
Dirty filter
This situation has a bad effect on visibility, especially in winter. In frosty weather, windows freeze, reducing visibility. This is one of the reasons why replacement is carried out.
An additional function of a filter, especially a carbon one, is to retain foreign odors and harmful chemicals.
Over time, all this accumulates in the filter material and after six months of operation, it no longer purifies the air, but, on the contrary, releases harmful substances into the cabin.
Therefore, if you change it on time, it helps create a healthy atmosphere and comfortable conditions inside the car.
Often, car enthusiasts do not pay enough attention to the cabin filter in their car and decide to replace it after unpleasant odors appear in the cabin when the cooling system is turned on. These odors appear during operation of the air conditioner from the evaporator and a dirty filter.
Thanks to the evaporator, the air conditioner not only cools the air, but also dehumidifies it. Therefore, the evaporator is constantly in a humid environment, which promotes the development of pathogenic microorganisms in it.
To avoid their negative impact on the body of the driver and passengers, the evaporator must be cleaned with antibacterial agents.
The quality of the filter element is of great importance in megacities, as it traps in its layers smoke, dust, soot and exhaust gases that are contained in the air on the street, especially near roads. Therefore, you should regularly replace the filter in the car's interior, especially since the replacement procedure is simple.
Step-by-step instruction
The procedure takes no more than 30 minutes. It is best to use a carbon filter for the interior of the Kia Rio 2010-2013.
New filter element
You can install product category No. MS-6307, which provides good protection against dust. The place to install the cabin filter in the Kia Rio 2010-2013 is located behind the glove compartment (glove box). Therefore, before starting work, you should open the glove compartment and empty it of its contents.
Glove box
There are two plugs on the sides of the glove compartment inside; they need to be pulled out. To do this, the plugs must be turned counterclockwise. First, remove the left plug.
Differences in types of cabin filters
In order for a car owner to make the right choice when purchasing a new cabin filter, he needs to understand a number of issues that will indicate the strengths and weaknesses of the types of filter elements.
All cabin filters are divided into two types:
- Conventional dust filters.
- Fine air filters.
Both types of filter elements differ from each other not only in technical characteristics, but also in price. Each type has its positive and negative sides.
The differences between these types are as follows:
- Conventional filter elements are quite cheap. Their main disadvantages are the passage of small dust particles, lack of air purification from foreign odors, fragility and fragility. In addition, they are unable to clean the air of toxic gases.
- Fine air filters are usually made of synthetic materials or high-quality natural materials. Their main advantage is to clean the air from foreign odors and capture the smallest dust particles. The main disadvantage is, of course, the price. It starts from 400 rubles, and can even go up to 2500 rubles.
Having understood the issue of the difference between cabin filters, the car owner will be able to make the right choice when purchasing a new consumable. The choice in favor of a certain type of filter elements remains with the car owner.
Replacing the cabin filter of Kia Rio-3
Timely and regular replacement of the cabin filter in a car is the key to the health of the driver and passengers. The air that enters the cabin passes through a filter element, on which, during long-term operation, in addition to dust, various harmful microorganisms multiply.
As a rule, technicians recommend changing all filters, including cabin filters, during scheduled maintenance activities.
In Kia Rio-3, the maintenance interval is 15 thousand km.
If you operate the Kia Rio in dusty conditions (especially in warm and dry seasons and climate), then you need to change the cabin filter more often.
Replacing the cabin filter will take you no more than 10 minutes , and you will not need any tools or other aids.
The cabin filter is located on the front passenger side behind the glove compartment (glove box) in the heater housing. Therefore, to get to it you need to dismantle the glove box.
Procedure for replacing the cabin filter
Open the glove compartment and unscrew the side restraints.
Take the glove box with both hands and pull it towards you, removing it from its hinges .
In the opening that opens, you will see individual elements of the ventilation system and a horizontally located cover, behind which there is a filter . By pressing the side latches, remove the cover (when installing the cover, the arrow on its body should be directed upward).
Pull out the filter. Taking into account the budget of the Kia Rio-3, you can only see the cabin filter (retaining only large particles of dust and leaves, etc.).
To improve the purification of the air entering the car interior, buy a paper filter (catalog number 971332E200), or even better (depending on your budget) a carbon filter.
- If you also have a fine air filter installed, then it should also be removed.
- Clean, rinse and dry the strainer.
Advice: if the fine filter is not very dirty, you can extend its life by drying it and vacuuming it thoroughly (of course, this cannot be done forever).
Source: https://kiario3.ru/poleznoe/zamena-filtra-salona-kia-rio-3/
When and why you need to change
The main reason why installing a new car module is required is to reduce the level of travel comfort:
- The heater has stopped working correctly (it doesn’t heat in winter and doesn’t cool in summer).
- The appearance of foreign odors.
A working filter removes up to 99% of toxic impurities from the air entering the cabin. If it becomes clogged, dust, soot and decay products of exhaust gases will enter the car.
Toxic microelements enter the lungs and have a detrimental effect on the body. A person who breathes toxic air for a long time gets tired faster. His concentration decreases, dizziness and a sore nose occur.
Signs of a clogged filter
It is not at all necessary to go to a car service to check the car cleaning system. A malfunction can be identified by characteristic symptoms:
- When you turn on the heater, you hear whistling, clicking and other strange sounds.
- The climate control unit does not maintain the set temperature, and heating occurs intermittently.
- In winter, moisture appears on the windshield and the side windows fog up.
- The air deflector blows weakly (especially noticeable in summer).
- An unpleasant smell comes from the street.
A distinctive sign that the part is clogged and needs to be replaced is that the dashboard and seats begin to periodically become covered with dust, even when the car is hermetically sealed.
Cabin filter replacement interval
According to the maintenance regulations, it is recommended to install a new cleaning module after 15 thousand kilometers. This mileage, after which a spare part needs to be replaced, is reduced by 2 times with constant use of the car under the following conditions:
- in spring and autumn (absorbent material begins to rot due to high humidity);
- in industrial areas;
- on city streets with heavy traffic;
- in long traffic jams;
- with the air conditioner on continuously.
Experienced drivers advise checking the Kia Rio 3 cabin filter after 4-6 thousand kilometers for damage and contamination. If the surface of the material has become dark in color, then there is no need to try to blow it or wash it. The filter has already lost its absorbent properties. Therefore, it would be more practical to install a new module and throw away the old one.
Replacing the cabin filter on Kia Rio 2010-2015
We all love cleanliness. We love it both in the apartment and in the car. One of the components of cleanliness is the quality of the ambient air.
In order for the air inside the car to meet our criteria, there is a cabin filter. However, even the highest quality and most expensive cabin filter cannot last forever and needs timely replacement. Fortunately, any novice car enthusiast can do this, and the whole process will take no more than half an hour.
Cabin filter service life
Most often you can hear numbers from 15-20 to 45 thousand kilometers required before the planned replacement of a Kia Rio 2014 auto part - the cabin filter. However, the actual useful period of operation may differ greatly, for example, for arid and dusty climatic zones and colder and “cleaner” ones, or when used in large metropolitan areas.
People most often think about replacement only at the moment when, when air circulation is turned on, a persistent unpleasant odor appears in the cabin. And in vain. This needs to be done regularly.
The process of replacing the cabin filter on Kia Rio 2010-2015
Of course, before starting work, you have to buy a new filter element. Carbon filters are considered the most recommended. Nowadays their variety is very great. Choose according to your taste.
- First, you need to clear the front panel glove compartment of foreign objects.
- You need to remove the side plugs.
- Now, lower the glove compartment door all the way down.
Inside there will be a special shelf for the filter with clamps located on the sides. Squeezing the clips, being careful not to damage the rubber seals, remove it.
Finally, the old filter element can be replaced with a new one. At the same time, do not be afraid if it does not fit in width. In this case, simply compare the dimensions of the filters and cut the purchased one with scissors along one of the ribs.
The replacement can be considered complete. All that remains is to put everything back in reverse order and enjoy the freshness and purity of the air entering the cabin.
Source: https://kiawheels.ru/rio/ekspluataciya-i-remont/zamena-salonnogo-filtra-na-kia-rio-2010-2015
Where is the cabin filter located?
Of course, this car already has several generations, and the Kia Rio is updated almost every year, but the designers do not change the location of the cabin filter.
It is located behind the glove compartment (glove compartment), located on the front panel on the passenger side.
Moreover, the cabin filter is installed there in all Kio Rio models - II and III generations, 2010-2015 model years. Of course, there are some replacement nuances for models of different years, but they are not significant and will be discussed below.
Replacing the cabin filter in Kia Rio
The driver will not be able to control the movement if he has a headache or decreased performance. And such symptoms can occur if the cabin filter no longer cleans the air properly.
Knowing how to change the Kia Rio cabin filter yourself, the driver will avoid troubles of this kind, and at the same time save money on a visit to an official dealer.
What is the cabin filter responsible for?
The part is installed on the air duct, which provides air flow into the cabin. Without the air duct, the driver and passengers could suffocate with the windows closed and the engine running.
The problem is that the air coming from the street is polluted and contains abrasive particles, the entry of which into the lungs can lead to asthma and other diseases. A cabin filter will help you avoid these dangers. He is also responsible for the operation of the air conditioner.
When to change?
Technical documentation for a Korean car produced in 2010-2017 suggests replacing it every 15 thousand kilometers. But this period may be shortened depending on the intensity of vehicle operation and gas pollution on the roads.
In summer the air is more polluted than in winter, the urban climate is also less favorable than rural, so sometimes replacement will have to be done more often.
Signs of its need will be:
- feeling of burning and soot in the cabin;
- deterioration in the performance of the air conditioner;
- a distinct odor that occurs when the engine is running;
- increased humidity in the cabin, fogging of windows;
- hypoxia or allergic reactions in the driver and passengers.
There is no need to wait for these signs to appear; you need to change the filter at the first feeling of discomfort. Surveys of Kia drivers show that many change the filter not only once every six months, but every 2-3 months.
It is important that the technical manual will not indicate how to change the cabin filter on a Kia Rio, but the replacement process can be viewed in specialized videos.
How to replace the cabin filter element of a Kia Rio with your own hands?
Before starting work, you will need to purchase the consumable item itself. The optimal solution would be to purchase a coal version, its catalog number is MS-6307.
From a technical point of view, even an inexperienced technician will not have any problems with how to remove the cabin filter on a Kia Rio and install a new one. The work can be done in your own garage, or just in the parking lot. The filter is located in the cabin, right behind the glove box.
Replacement algorithm:
- open the glove compartment and empty it;
- Find two plugs inside the compartment and remove them by first turning them counterclockwise. The glove box lid must be lowered and the right door open to create the space needed for work;
Replacement procedure
First, we should tell you where the Kia Rio cabin filter is located? It is located behind the glove compartment, so access will require some minor dismantling work. Best of all, you don't need any specialized tools to perform the replacement. As a last resort, only a regular slotted screwdriver. It is fashionable to change the filter both in the garage and in an open space, preferably in good lighting.
All that remains is to find out how to change the cabin filter on a Kia Rio? Drivers just need to follow the following instructions:
- Open the glove compartment and remove all items from it. There are two limiters on the right and left inner sides. You need to pull them out. If they are difficult to give in, you can use a screwdriver. Be careful not to damage the seats.
- Lower the glove compartment all the way down and then carefully remove it from its hinges.
- Find a rectangular container in the space behind the glove compartment. It must be closed with a lid, which is secured with two clips on the sides. It is enough to squeeze the latches on both sides and pull the cover towards you.
- Remove the old filter and install the new one. Please note that the part has a special arrow-shaped indicator. The filter must be inserted so that it points down.
- Make sure that the filter fits tightly into place and is not wrinkled.
- Replace the cover by snapping the two latches into place.
- Place the glove compartment in its original position and reinstall the stoppers.
As you can see, the whole process takes 5, at most 10 minutes. The main thing is not to damage the drawer stops. If you still have questions, watch the video at the end of the page.
Kia Rio 3 cabin filter
The filter installed in the external air supply circuit to the Kia Rio 3 cabin is designed to protect the internal microclimate from pollution. It is surprising that cars were produced in the recent past without this essential and functional cleaning element.
When driving in dusty areas, the car interior accumulates a large amount of gases, dust and other harmful impurities. This can have a negative impact on the health of people present in the cabin, and then the cabin filter needs to be replaced.
Fortunately, nowadays, thanks to the rapid development of technological progress in the automotive industry, the interior is endowed with practical and effective protection against pollution.
This pleasant and useful option also includes the practical model of Korean origin, the Kia Rio 3.
Over time, any filter element falls into a substandard state due to clogging of its working component. Naturally, in such a situation, the cabin filter will need to be replaced. In this matter, it is important to correctly understand the features of choosing a new part, taking into account the design aspects of the car (its part related to the air supply path).
How to diagnose the problem?
Here it will be useful to determine the true need to replace the part, as well as where it is located. Smells in the cabin cannot fully indicate the fact of a blockage.
Here you need to independently verify the degree of clogging of the filter component. And know how to change the cabin filter.
- Given the need for verification, we proceed to action. Open the glove compartment lid and unfasten the latches present inside, which are located on the side surfaces.
- Kia Rio 3 allows you to diagnose without resorting to special efforts. Here you will need to rotate the element 360 degrees and remove it towards you.
- In the second generation of the popular model, the clamps had a composite design, and considerable effort was required to loosen them.
- Let's continue. After deactivating the fasteners, the filter element appears before the eye.
- Removal requires simple dismantling of the latches, after which the cover becomes accessible.
- We set it aside to provide sufficient access to the frame of the filter element itself.
- Only after removing the frame will it be possible to remove the filter and assess the degree of contamination of its working surface. We determine the condition by color. For a gray filter, vacuuming will be sufficient. If the element shows a black or dark gray tint, then it will need to be replaced in order to stop the harmful effects on the health of the people present in the Kia Rio 3 cabin.
How to choose a new filter?
When the cabin filter needs to be replaced, you need to purchase a new filter. Consumables for Kia Rio 3 can be purchased both via the Internet and from ordinary retailers.
The most popular component is the one with the article number “971334L000”. Note that the filter for Kia is also applicable to Hyundai models. The component is an original carbon cleaner for the salon atmosphere.
- Front left fender liner Kia Rio 2016
- Fuel filter Kia Rio 3 catalog number
- Kia Rio engine air filter replacement
As an alternative, you can consider offers from other (only verified) manufacturers. All filter elements are manufactured according to standards, so installation will not cause difficulties.
Let us remind you here that the factory product does not in any way infringe on the quality standards of proven analogues. More details: filters can purify cabin air with the same quality, but do it in different ways. The buyer has the right to choose.
Replacing the cabin filter in KIA Rio 3
The cabin filter is designed to clean the air that enters the cabin through the air intake openings from the street. The task is extremely relevant if you live in a large city. The concentration of exhaust gases on the road is high, and even with the windows closed, a huge amount of harmful substances enters the car. Air from the road contains a lot of substances hazardous to health:
- tire dust;
- small rubber particles;
- asbestos from brake pads;
- bacteria, viruses and plant spores.
If we talk specifically about the exhaust gas from a car, it includes more than 200 different toxic substances. These are oxides of carbon, sulfur and nitrogen, compounds of heavy metals, soot, hydrogen fluoride and much more. Even for a completely healthy person, a high concentration of exhaust gases is dangerous, but what can you say if you have asthma or other diseases of the respiratory system?
All these substances can lead to extremely unpleasant consequences: oxygen starvation, which causes headaches, shortness of breath and even a decrease in reaction speed. Nitrogen oxides lead to damage to the respiratory tract and lungs, while benzene, soot and formaldehyde lead to carcinogens. With constant exposure, chronic development of lung diseases is possible.
Experiments show that cabin filters are capable of trapping up to 99.5% of small and medium particles.
However, as it gets dirty, of course, the part loses its effectiveness, which forces drivers to regularly replace it.
We recommend not to neglect this, because your health directly depends on the quality of air in the cabin. In addition, replacing the cabin filter in the Kia Rio 3 takes just 5-7 minutes in a garage.
How often to change
The filter is a consumable item; accordingly, there is a regulated replacement frequency. According to the requirements of the third generation Kia Rio, the filter should be replaced every 15 thousand kilometers, however, there are a number of factors that can reduce this period:
- In the summer, many drivers prefer to drive with their cars closed and the air conditioning on. Due to this, most of the air enters the cabin through the filters, which reduces their service life to 7-8 thousand kilometers.
- In spring and autumn, there is an increased level of humidity, which can lead to rotting of the filter material. In this case, naturally, you will need an emergency replacement of the cabin filter on the Kia Rio.
- During active driving in urban or industrial areas, the filter becomes actively clogged with soot, which reduces throughput. The part may become unusable after 5-7 thousand kilometers.
Thus, one cannot rely entirely on the indications in the regulations. The optimal method is to check the filter every 5 thousand for the level of contamination.
Which filter to buy: varieties
Please note that models supplied to Russia are versions for China, and not for Europe. Accordingly, if you bought a foreign car in the Russian Federation, then you need the following article number for the filter - catalog number 97133-OSOOO. This is a filter for models before 2012 that have not yet been restyled. The filter involves only rough cleaning (only from leaves, therefore, it is not able to retain dust), so drivers buy non-original, but more advanced models such as MANN CU1828, MAHLE LA109, VALEO 698681 or TSN 9.7.117.
Source: https://jrepair.ru/to-kia/zamena-salonnogo-filtra-v-kia-rio-3
Replacing the Kia Rio cabin filter -
One of the advantages of maximum unification of conveyor production is the similarity of maintenance procedures for different cars of the same manufacturer, down to the smallest detail. For example, having replaced the cabin filter on a Kia Rio of 2-3 generations yourself, you can find that it is changed in a similar way on other Kia passenger cars of the same class.
Considering that this procedure is more than simple, there is no need to resort to the help of a car service: you can simply change the cabin filter yourself even without any experience
How often should I replace it?
As with most modern cars, replacing the cabin filter of the third generation Kia Rio, or more precisely, the post-restyling 2012-2014 and Rio New 2015-2016, is prescribed at every maintenance, that is, every 15 thousand kilometers.
In reality, the service life is most often noticeably reduced:
- In the summer, many Rio owners with air conditioning installed prefer to drive on dirt roads with the windows closed to avoid dust in the interior. At the same time, a large volume of dust-saturated air is pumped through the cabin filter, and it can become noticeably clogged already at 7-8 thousand.
- Spring and autumn are a time of humid air, when the likelihood of rotting increases - even a filter that is not yet very clogged will have to be thrown out, getting rid of musty air in the cabin. This is why, by the way, it is best to time the filter change specifically for this season.
- Industrial areas and city traffic jams actively saturate the filter curtain with soot microparticles, which quickly reduce its throughput. In such conditions, it is best to use carbon filters - classic paper ones either clog quickly, or when installing a cheap non-original one, they simply cannot retain particles of this size, allowing them to enter the cabin. Therefore, if your cabin filter can withstand more than 8 thousand in such conditions, you should think about choosing a different brand.
If we talk about cars before 2012, they were equipped only with a coarse filter that retained leaves, but did not retain dust at all. It is enough to shake it out from time to time, but it is better to immediately change it to a full-fledged filter.
Choosing a cabin filter
The cabin filter in the Kia Rio has undergone several changes over the life of this model. If we talk about models for the Russian market, based on the version for China and therefore different from cars for Europe, then the article number of the factory filter is as follows:
- Before restyling in 2012, cars were equipped with a primitive filter for coarse particles under catalog number 97133-0С000. Since it does not involve replacement, but only shaking out the accumulated debris, they only replace it with a fully filtered non-original one - MANN CU1828, MAHLE LA109, VALEO 698681, TSN 9.7.117.
Source: https://zamenafiltr.com/zamena-salonnogo-filtra-kia-rio/
