Replacing low beam and side lights in a Ford Focus 2

Replacing low beam and side lights in a Ford Focus 2

The head light for any car turns out to be an important element of operational safety.
It is enough to miss an obstacle on the road once to get into a serious accident and put your own life at risk. And the comfort of use directly depends on the quality of road lighting. Therefore, it is necessary to periodically change the lamps in car headlights to maintain sufficient brightness. Halogen light bulbs tend to dim over time. The more technologically advanced and high-quality lamp is installed in your car, the longer you can drive without knowing grief. But even the most reliable lamp from the world leaders in the production of automotive lighting does not serve normally for more than 5-7 years. If your Ford Focus 2's road lighting has become unsatisfactory, it's time to change the bulbs and improve this aspect.

glove box (4M51A06044AEW)

On the forum, people also asked about replacing headlight bulbs, and the answer contained only a small, not very clear text. We start with the grille, there are two groups of clips on it, 4 upper 2 on top, 2 on the sides and 3 lower 2 on the sides and the central one behind the Subaru badge, screwdrivers.

It all started with the fact that the side lamp in one headlight burned out, I decided to install LEDs, bought 2 pieces for 70 rubles. That's why I decided to make this little entry. Next time I'll try to replace the lamps in the fogs with white ones.

I have a bespectacled Subaru, I can’t figure out how to replace the side lights and what needs to be done for this, please tell me. The sequence of replacing the size is as follows: This will probably be my first blog, a lot of things have been changed and done in the car, but alas there is no time to write, work leaves no time.

Low and high beam bulbs, as well as side lights, are accessible from the engine compartment. Choose the best car service for replacing side light bulbs on Subaru from RUB. Choose cheaper, more proven, closer! How to remove the original radio of a Ford Focus 3.

Ford Focus 3 steering wheel from dooom. Ford Focus2 CD removal. How to remove a Ford Focus radio. Self-diagnosis of Sony radio in Ford.

Maybe it will help someone) Replacing the cabin filter Ford Focus 3 (instructions, tips)

Where to find and how to enter the code for the Ford Focus radio. How to remove the steering wheel on a Ford Focus 2 Gid Auto.

Replacing bulbs in a Ford Focus headlight. And so to remove the radio on this car you will need a thin flat plate and a screwdriver.

I removed the radio from the Ford a year ago. Removing a Ford car radio5 years ago.

Ford Focus 3 AUX2 months ago. I removed the radio from a Ford Focus 3.

Added by Roma Romanov10 months However, the Buyer must ensure that the goods returned are in their original conditions.

If the items are damaged or lost when they are returned, the buyer will be responsible for such damage or loss and we will not give the buyer a full refund.

Buyer is responsible for shipping costs to return the item. We offer 1 month free replacement. Buyers may request a replacement within 15 days of your receipt of the Product.

VESKO-TRANS.RU

AutoNews / Reviews / Tests

Replacing Dimensional Lamps Ford Focus 2 Restyling

Replacement Ford Focus 2 Incandescent lamp

In the Ford Focus, the restless dim lights are part of the headlights, which also include remote lighting, parking lights and cornering lights. The Ford Focus 2 is equipped with conventional H7 halogen lamps with a power of 55 W.

Halogen headlights H7 for Ford Focus 2

A little about the features of H7 lamps for Ford Focus 2 headlights

The introduction of H7 headlamp lamps dates back to the late 1990s. They are classified as single-filament lamps and are housed in four-phase car headlights with a separate reflector system for low and high beams.

.

These fasteners are a flange type, the distinguishing feature of which is a fixed distance from the flange to the threads. Practice shows that this characteristic guarantees correct lighting.

Ford Focus Headlight

What are the best H7 low beam bulbs? There are several varieties: halogen, xenon and LED. The restyled headlights of the Ford Focus 2 have halogen headlights. This is the most common and optimal option, most often used not only on Ford Focus, but also on cars of other brands.

. The advantages of halogen light sources include the following factors:

• reasonable price;
• there is no need to install additional equipment;
• high-quality comfortable light.

The design of these lamps is quite simple. they consist of a bulb, a spiral and halogen gas. Speaking about the disadvantages of low-H7 lamps, experts name only one serious factor. high operating temperature, which significantly affects the service life of the optics. But most Ford owners focus on confirming that halogen is the best value for money.

replacement ford focus headlights 2

Ford Focus 2 fork replacement

.

How to change headlights on a Ford Focus?! ABC ford

How to change light bulbs on a Ford Focus 2

.
Change
front light
bulb dimensions
and

backlight bulb

replacement lights for Ford Focus 2

Halogen headlights on Ford Focus 2 sometimes burn out. This is a normal normal situation and nothing to worry about. You can replace headlight bulbs yourself, or you can turn to a car service specialist for help. Of course, the help of specialists will save you from unnecessary hassle. But on the other hand, it's nice to know that you can do something useful with your own hands if necessary

. Moreover, replacing the light bulb yourself will help you avoid unnecessary financial costs.

Replacing low beam is easy. This will require you to have minimal skills in working with a simple tool. As mentioned above, they are located in the headlights, so replacement requires removal.

To do this correctly, we need a flat head screwdriver, clean dry gloves, a new lamp and 15 minutes of free time. You should know that halogen lamps should not be handled with bare hands. this negatively affects their light. As you know, our fingers are covered with a thin layer of fat.

. it remains on the surface of the bulb and then evaporates in the headlights during operation, causing the light to become cloudy. This applies not only to Ford Focus 2, but also to any other car brands.

Now let's take a quick look at how low beam headlights are replaced on a Ford Focus 2:

1. If you decide to change the headlights on your Ford Focus yourself, start by cleaning the headlights. We remove dust, dirt and moisture from them so that nothing gets inside. this will have a negative effect on the headlights.
2. Open the hood of the Ford Focus and remove the screw at the top of the headlight.
3. There are 2 plugs at the bottom of the headlight. click them to open.
4. We shift the focus of attention to ourselves.
5. Unplug and unplug.
6. The headlight is in our hands. we open it, open 4 latches.
7. Remove the low beam lamp cover and remove it.
8. Place a new working light bulb in its place.
9. I'm putting everything back together.

How to replace

Selecting the necessary consumables is a more labor-intensive and complex process than replacement. Let's look at how to replace a light bulb on a pre-restyling and on a Focus 2 restyling. The cars have the same consumables, but the headlight mounting designs are slightly different.

1. Open the hood and use a screwdriver to separate the headlight bracket. There is no need to unscrew the headlight itself.
2. Use a screwdriver to unclip the fasteners downwards.
3. We move the headlight unit parallel to the movement of the car towards us.
4. We move the latches on the back side of the FF2 headlight.
5. Remove the connector and move it aside. This must be done carefully so as not to damage the wiring.
6. Remove the contact block from the light bulb.
7. We press on the spring clamp and remove the burnt-out consumable.
8. We insert the cartridge of the new consumable in place of the old one.
9. Installing a new H7.

When the light bulb comes into contact with the skin, a reaction occurs and the consumable then does not work. If you touch the glass, wipe it with a cloth moistened with alcohol and then dry it.

Ford restyling differs in that instead of a plastic cover with latches, rubber plugs are installed on it. They are much easier to remove; you don't have to fiddle with a screwdriver. Under the rubber there are new type pads. To remove the burnt flask, you just need to press the latch tab.

Which lamp is better to install on a Ford Focus 2 for low beam?

Standard lamps installed from the factory are usually Philips Long Live or Osram Ulra Live. That is, these are lamps with an extended service life.

• PHILIPS H7-12-55 LONGLIFE ECO VISION P-12972LLECOC1
• OSRAM H7-12-55 Ultra Life O-64210ULT

You can install brighter lamps than standard ones, for example +30% light or even brighter +100% or +130% light. The disadvantage of these lamps is that their service life is shorter than conventional ones.

• PHILIPS H7-12-55 +30% Vision
• OSRAM H7-12-55 +30% Super O-64210SUP
• OSRAM H7-12-55 +110% NIGHT BREAKER UNLIMITED
• Philips H7-12-55 +130% X-tremeVision

These lamps will illuminate the road better than standard ones, and lamps +130% and +110% are leaders among halogen lamps, but when buying them you need to be prepared for the fact that they will have to be changed more often.

Manufacturer's choice

All halogen lamps are based on the type of construction - filament, bulb made of quartz or hard-alloy glass, inert gas.

The consumable must have a high resource, an even luminous flux and an optimal color temperature.

In order for the headlights of your Ford Focus 2 to shine well in the evening or at night, you need to choose a lamp with light as close as possible to daylight.

Osram H7 Original

Osram is a German inexpensive brand, the lamp costs 200-300 rubles. Voltage is 12 V. The light has a rather yellowish tint, which initially upsets the buyer.

However, the lamp illuminates the road well, and in rainy weather yellowness turns out to be better than white light. Lifespan varies depending on usage, but the average is a year. Power 55 W. The luminous flux is uniform. Excellent quality for little money.

Philips H7 Vision Plus

It’s also rumored that the consumable costs much more – 900 rubles. For such a high (compared to others) price, Philips lamps provide even light. Its brightness is not affected by shock, vibration or temperature changes. The light is white with a yellow tint.

Another plus: this consumable has low power consumption, which reduces the load on the Focus battery. Voltage 12 V, power 55 W.

Koito Whitebeam H7

High temperature halogen lamps made in Japan. Price around 1500. Bright white light output. Voltage 12 V.

Although manufacturers assure that these consumables are safe to use, there have been cases when the plastic of the headlight melted. In fog or rainy weather, white light is not visible; yellowish light is much better. The service life ranges from 3 to 5 months.

Behr-Hella H7 Standard

Korean cheap standard lamps. The service life varies depending on use, but on average for Focus it is six months. Voltage 12 V, power 55 W.

The light is very bright, even, with a yellowish tint. The wet road is clearly visible. Easy to replace by yourself. The price is 150 rubles.

Side lights horns

I also liked the multi-color marker lamps for cars. After all, everyone wants to stand out somehow, and what better way than to change the most striking element of any car enthusiast? I think no! Therefore, my eye fell on this particular model, I can ride for 2 weeks with different types of colors, and I’ll even have a couple more left! I was quite pleased, and besides, the old faded ones were no longer fulfilling their duties to the fullest. Now with Multi-color parking lamps for cars, all these problems are solved, and I get tremendous pleasure from driving around the city and outside!

Ford Focus Hatchback 2 › Logbook › Light bulbs on Ford Focus 2 Restyle. And there is the same picture with sockets, I’m looking for a lamp for the front dimensions, w5w, in the search I get 3 different sockets... can anyone tell me? Light bulbs for Ford Focus 2. Restyling on the Focus. 1 — front turn signal lamp, lamp type PY21W The following lamps are installed on the FF2 with a sedan body: 1 — rear brake light and side light lamp, lamp type P21W. dimensions, license plate illumination, diode, light bulb, side lights, lamp, light bulb replacement, lights. I am posting photos for those who are experiencing difficulties when replacing the headlight bulbs on a Ford Focus 2 Restyle. Lamps used in the Ford Focus 2 car. In the Ford Focus 2 car, light bulbs that consume a current of 12 Volts are used for internal and external lighting. Ford Focus 2 - the car that inspires Ford Focus 2 replaced the first generation in 2004. LED lamps installed in the front marker lights will make your car more visible. Front marker light. To save fuel and preserve the life of the main low beam lamps, it is recommended to retrofit your Ford Focus car with an inexpensive set of daytime running lights. What lamps to put on a Ford Focus 2. Ford Focus 2 is one of the most popular imported golf cars in our country. The Focus was restyled in 2008. Replacing low beam lamps on a Ford Focus 2 restyling - Duration: 8:03 First Review 12. Replacing the license plate light bulb on a Ford Focus 2 - Duration: 1:14 did5ru 54 . Which lamps are suitable for low beam Ford Focus 2. Choose the H7 lamp for low beam Focus 2. In design, any halogen is similar to an ordinary Ilyich light bulb - it consists of a bulb (quartz or hard-alloy glass). 15% discount on spare parts and accessories for foreign cars in Academy Plus stores Manufacturer: SCHMITZ (SCHMITZ) CARGOBULL side: right color: red-white location: remote. in stock. LED side marker light, without cable, with bracket, Unipoint I LED. Schmitz rear light glass, left and right EUROPOINT I. 960 RUR. LED side marker light, without cable, with bracket, Unipoint I LED. rear combination light, left (Schmitz semi-trailer), EUROPOINT I. 24V 12V led side marker lights for Cargo trailers caravan side clearance marker light lamp led cargo. Schmitz 1042274 Side lights. Brand. Vendor code. 2PF340825001. Upper marker lamp Schmitz (white). 2. In stock. Hi all! The side lights on the trailer have stopped lighting, what could be the reason? Tractor Daf xf 95 p.trailer Schmitz. 975 c. Yes. Marker lamp OG-35 for a lamp similar to E205. Side light with bracket and 1.5 meter cable. Side bumper, side protection for semi-trailer Schmitz Schmitz. VELTON side marker lamp, front. Article: 1008659. Name: Cable for side marker lights Schmitz (4 orange, 1 white). Description: Aspock. SCHMITZ Trailer side marker lights (set of 4 pcs.) Article: 1008659. Spare parts for Schmitz trailers are especially in demand in active conditions. Parking lights. LED marker lamp obrysówka Schmitz, Kogel Krone. LED side marker light, without cable with bracket, Unipoint I LED. Schmitz rear light glass, left and right EUROPOINT II. Side light. Side light SCHMITZ. Brand. Vendor code. SCHMITZ CARGOBULL 1107386 — Side lights — price (price list), availability. Buy wholesale in the PORT3 online store. Side marker lamp SCHMITZ. Sales, search, suppliers and stores, prices in Russia. 2 million+ verified suppliers on Alibaba. Get a great deal. We give discounts. Hurry up! These color led rgb car lamps do not have plastic parts in the body. This further ensures their durability. The fact is that many manufacturers install diodes in a plastic case, and during operation as dimensions, the plastic parts heat up from a standard source of low or high beam and melt. Such products may not last even a month.

Reviews Side lights horns

The toy is interesting, especially for those who love everything bright and want to stand out. When ordering over the phone, they ask for the make and model of the car, apparently because these lamps are not universal and will not fit every car. Reviews Side lights horns

The gradual, smooth shutdown is very helpful in a dark courtyard; I manage to run to the entrance. Any parties in nature or in the country are more interesting; a car becomes a kind of analogue of a disco ball.

I will share my real review about the side lights horns. The original RGB lamp with remote control is equipped with LEDs from the largest manufacturer Epistar. However, the situation is such that Epistar products are often counterfeited. And despite the complete external similarity, the copies turn out to be of low quality. Such products can be purchased quite cheaply on the Aliexpress website. However, a fake is different in that its crystals quickly fail, it gets very hot and has lower light output. If the original will work for 80 thousand hours, then the fake will have a service life several times less and may be limited to 2-3 thousand hours. It is for this reason that it is better to buy RGB lamps for cars in an online store that supplies direct supplies from the manufacturer. This is the only way to guarantee that you will purchase a truly high-quality kit. Multi-colored car lamps are equipped with SMD 5050 LEDs in multi-color variations. This model is resistant to humidity, temperature changes and vibration. Diodes have a long service life and maintain their original characteristics for a long time. Crystals of 4 colors are used in production, with white being placed separately. By varying the current, a total of 16 color variations are obtained.

More links where you can learn about Side lights horns: Side lights 2110

Side marker lights
Side marker lights
, Side marker lights
Side marker lights
, How to change the side marker light bulb on a Chevrolet Cruze, Patriot side marker lights LED side marker lights buy How to replace the side marker light bulb on a Hyundai Solaris.

Buy-Parking lights horns

This is not simple pampering and showing off, but real savings. The fact is that such LED lamps are more economical than conventional marker lamps. They do not eat up the work of the generator; their energy consumption is much lower. Ford Focus Hatchback 2 › Logbook › Light bulbs on Ford Focus 2 Restyle. And there is the same picture with sockets, I’m looking for a lamp for the front dimensions, w5w, in the search I get 3 different sockets... can anyone tell me? Light bulbs for Ford Focus 2. Restyling on the Focus. 1 — front turn signal lamp, lamp type PY21W The following lamps are installed on the FF2 with a sedan body: 1 — rear brake light and side light lamp, lamp type P21W. dimensions, license plate illumination, diode, light bulb, side lights, lamp, light bulb replacement, lights. I am posting photos for those who are experiencing difficulties when replacing the headlight bulbs on a Ford Focus 2 Restyle. Lamps used in the Ford Focus 2 car. In the Ford Focus 2 car, light bulbs that consume a current of 12 Volts are used for internal and external lighting. Ford Focus 2 - the car that inspires Ford Focus 2 replaced the first generation in 2004. LED lamps installed in the front marker lights will make your car more visible. Front marker light. To save fuel and preserve the life of the main low beam lamps, it is recommended to retrofit your Ford Focus car with an inexpensive set of daytime running lights. What lamps to put on a Ford Focus 2. Ford Focus 2 is one of the most popular imported golf cars in our country. The Focus was restyled in 2008. Replacing low beam lamps on a Ford Focus 2 restyling - Duration: 8:03 First Review 12. Replacing the license plate light bulb on a Ford Focus 2 - Duration: 1:14 did5ru 54 . Which lamps are suitable for low beam Ford Focus 2. Choose the H7 lamp for low beam Focus 2. In design, any halogen is similar to an ordinary Ilyich light bulb - it consists of a bulb (quartz or hard-alloy glass). 15% discount on spare parts and accessories for foreign cars in Academy Plus stores. Very bright, nice, different modes and all interesting in their own way. Even I, who is far from any such things, liked it. It happens that desynchronization occurs. In this case, I just do 2-3 quick switches and that's it.

Replacing low beam lamps on a Ford Focus 2

The halogen low-beam headlights on the Ford Focus 2 tend to burn out from time to time - this is a normal situation, and there is nothing to worry about. You can replace the headlight bulbs yourself, or you can seek help from specialists at a car service station. Of course, the help of specialists will save you from unnecessary hassle. But, on the other hand, it’s nice to know that if necessary, you can do something useful with your own hands . Moreover, replacing the light bulb in the headlight yourself will help you avoid unnecessary financial expenses.

Replacing low beam sources on a Ford Focus yourself is not a difficult task. It will require you to have minimal skills in handling a simple tool. As mentioned above, they are located in the headlight unit, so replacement will require its removal.

In order for everything to go well, we need a flat-head screwdriver, clean, dry gloves, a new lamp and 15 minutes of free time. You should know that halogen flashlights should not be handled with bare hands - this will negatively affect their light. As you know, our fingers are covered with a thin layer of fat - it remains on the surface of the bulb and then begins to evaporate in the headlight during operation, causing the light to become cloudy. This applies not only to the Ford Focus 2, but also to any other car brands.

Replacing the Ford Fusion taillight brake light bulb: description, process

To change the brake light bulbs on a Ford Fusion, you will have to remove the tail light. The dismantling process is quite simple and does not require special knowledge and skills. The process is similar to the process of removing the rear light, but you also need to disassemble it.

Replacement video

https://www.youtube.com/watch?v=9bzu0lAJ6eA

The video will tell you how simple and easy it is to change the brake light bulb of a car's rear light, and will also tell you about the nuances, subtleties and tricks of the operation.

Removal process

Ford Fusion rear brake light bulbs tend to burn out. So, to change them, you will definitely have to remove the entire flashlight, since without this you cannot disassemble the body. To carry out this process, it is not necessary to visit a car service center, since the process of changing it yourself will take less effort and 20 minutes of time.

Let's get started with the process:

1. We remove the negative terminal from the battery, since the wiring operation will be carried out.
2. Open the tailgate.
3. We disconnect the block of wires, which is connected directly to the flashlight, with which we are going to carry out operations. Also, in the same place, you need to unscrew the plastic thumb that holds the flashlight.

4. Using a hexagonal star, unscrew the two fastening bolts of the lamp, which are located in the doorway.

5. We pull the lantern towards ourselves. After removing the bolts, the fastening is carried out by the pin from which we twisted the wing.

6. On the removed lamp, unclip the plastic latches using a flat-head screwdriver. And we change the burnt out light bulb.

Install the lamp in the reverse order.

Choosing a light bulb

To install a Ford Fusion brake light, lamps marked P21/5W are used. They can be either red or white light. For a more expressive glow, it is recommended to use untinted lamps. So, let's look at which lamps are suitable by manufacturer:

• 380 Red Standard Replacement 12V P21/5W Bayonet Bulbs (Pair)
• Lucas 380 12V P21/5W Bay15D Stop & Tail X2 Bulbs
• OSRAM Bulb 12V 21/5W Twin Pack Clear Motorcycle Electrics Lighting
• Osram LEDriving 380 P21/5W 12v LED bulbs x 2
• Bosch 380 P21/5W Car Bulbs x 2
• GE 380 P21/5W Car Bulbs x 2
• 380 P21/5W 48* 2835 Canbus LEDs (Cool White/Amber) Dual Color
• 380 P21/5W White 60W CREE-XBD SMD 12*5W Canbus LED (2 Bulbs)
• XTEC 380 12V P21/5W Clear Auto Replacement Bulb (Pack of 10)
• 380 ABD Prime 12V 21/5W P21/5W Bayonet Bulbs (Pair)

Of course, with modern trends, it is best to install LED technology bulbs, which are clearly visible in fog and other bad weather conditions. So, at night, the Ice lamp is better recognized than others.

Conclusion

Removing the rear brake light bulb from a Ford Fusion is quite easy and simple with your own hands. The process takes 15-20 minutes. It is also quite easy to select a light bulb based on the P21/5W marking. It is worth paying special attention to modern lamps with LED technology, which serve much better and have a fairly bright light.

Source: https://germanautoreview.ru/ford-de/fusion/zamena-lampochki-stop-signala-zadnego-fonarya.html

Step-by-step instruction

During operation, do not handle lamp bulbs with bare hands.

1. To change the lamps, you will need to dismantle the headlight; there is no good access to the rear of the headlight. To dismantle, unscrew one screw from the top using a slotted screwdriver.

2. Press the latch and pull the headlight towards you from the latches.

3. We remove the power connector and, for ease of changing lamps, we take the headlight to the table. You can also turn the headlight up and change the lamps without completely dismantling it.

4. To change headlight bulbs and dimensions, you need to remove the headlight cover. Squeeze the four latches and remove the cover.

5. To change the H7

We tighten the power connector simply by pulling it up.

6. Press and move aside the retaining spring of the lamp.

7. We take out the lamp and install a new one. Next, insert the lamp retaining spring into the mount and connect the power connector.

8. Changing the H1 is similar. Remove the connector, loosen the latch and remove the lamp. We do the assembly in reverse order.

9. To change the PY21W , turn it counterclockwise. The socket with the light bulb clicks and remove it.

10. Press down on the light bulb and then turn it counterclockwise. and extract it. We install the lamp and socket in the reverse order.

11. To change the 5W5 , squeeze the clamps and remove it from its seat. We grab the lamp and remove it from the socket. We do the installation in reverse order.

12. After changing the lamps, we begin reinstalling the headlight. We bring the cover and snap it onto the four latches.

13. Start the headlight until it clicks and tighten the fastening screw.

Changing lamps on the right and left is similar.

Video lesson

Results – is it worth doing the work yourself?

In order not to pay several hundred rubles for the service, you can safely do this work yourself. Now you know what low beam lamps are in the Ford Focus 2 and how to replace them. With a simple procedure, you can seriously improve your car travel experience. Pay attention to the differences between the versions before and after restyling, since it was the headlights that became the main factor in the update in the car.

Replacing headlight bulbs will be a simple task; you can do it yourself even if you have never opened the hood of the car. Just follow the simple instructions described above.

If the material was interesting or useful for you, publish it on your social network page:

Which low beam lamps are best for Ford Focus 2

There are two varieties of Ford Focus 2:

• pre-restyling;
• restyled.

There are some design differences between them, but the headlights of both models have halogen bulbs for both low and high beam. On pre-restyling cars, low and high beam were provided by one H4 design, and on restyled cars, separate lamps with an H7 socket were used for low beam, and H1 for high beam. These devices are used only for headlights, PTF, clearance or turn signals provide other types of lamps.

According to the current rules, it is impossible to make changes to the design of the vehicle, therefore it is prohibited to install other types of lamps in the headlights of the second FF.

Important! Despite the ban, many car enthusiasts install xenon or LED lamps, trying to gain in brightness and luminous flux power. This is a direct violation of the rules and may result in a fine or deprivation of your driver's license for six months or even a year.

It is necessary to take into account that Ford headlights contain several devices at once:

• low and high beam;
• parking lights;
• direction indicators.

During operation, halogen bulbs become very hot, which creates an unfavorable operating mode for other types of lighting devices. For example, LEDs, even with forced cooling, will not be able to work for a long time in such conditions.

Manufacturer's choice

From the factory, Ford Focus 2 cars of all types (sedan, hatchback, etc.) have General Electric halogen lamps, and for the FF 2 Vsevolzhsk assembly - General Electric, or cheaper samples from Philips. Power is 55/60 W. As a replacement, halogen analogs of h7 with the same parameters can be used, of which there are about 5 dozen. The choice is usually determined by the personal preferences and financial capabilities of the car enthusiast. Among the most well-known and reliable manufacturers, it is worth noting the following companies:

• Philips;
• Osram;
• Koito;
• Bosch, etc.

Note! The main selection criterion should be the operational and technical characteristics of the lamp, and the brand name only serves as confirmation of their quality.

Rating of the best low beam lamps for Ford Focus II

Let's look at the most popular models of low beam lamps for Ford Focus 2. For pre-restyling models:

How to choose the right lamp

First you need to buy a low beam bulb suitable for Ford Focus 2.
To do this, you need to know its markings. Using it, you can accurately select the right part, which is 100% suitable for a specific car model. Low beam lamps installed on Ford Focus 2 are marked H7. The power of the lighting device is 55 W. The device voltage is 12 V.

When choosing, it is recommended to give preference to the same manufacturer as the standard part. It’s easy to explain: a similar lamp, when lit, gives the same light as the remaining original one.

How to disassemble the headlight on a Ford Focus 2 Restyle

Often, owners of restyled versions of FF2 are faced with failure of high and low beam bulbs in cold weather. This occurs as a result of an overload of the car's electrical network, when the heating of the interior, seats and windows, lighting and fog lights are operating at the same time.

The solution to the problem is to replace the products with basic light bulbs of the first version FF2. These actions can be performed on your own, without visiting a service station, because the work is quite simple, and even a novice car owner can cope with it. This way you will save money and time on a trip to the service center.

If the headlights on your Focus are not working, you may need to disassemble the components. Dismantling the lampshade and separating it from the reflector and body is a last resort. These actions are resorted to when it is necessary to clean the reflector from dust and dirt, remove dirt from the lampshade, or modernize the architecture of the part by installing optics with lenses.

If the right or left headlight does not light, disassembly can be done by heating the sealant under the lampshade. You can also simply cut the sealant with an engraving cutter in a circle. Heating is most reliably done using a hair dryer, choosing a temperature range of 250-350 degrees.

It is best to carry out all work together - while one person heats the sealant, the second, using a knife or scalpel, cuts out the heated grease around the perimeter, pulling the lampshade out of the housing. When working with the headlight, you will need to thoroughly blow out the housing from sealant and chips, and clean the joints of old grease. Next, the joints of the lampshade and the body are degreased, and the headlight is glued together using a high-quality sealant that can withstand high temperatures.

Then you need to put the product aside for a day. During drying, it is worth using a clamp so that the lampshade is glued to the body as tightly as possible. When the sealant dries, remove any residue around the edges with a knife.

Possible problems and ways to solve them

Among the malfunctions in the lighting of Ford Focus 2 cars, the most common problem is that the low beam does not light up. This happens because it lights up more often and not only at night. The requirement to drive during the day with low beams or daytime running lights on leads to the fact that the lamps work in an overloaded mode and quickly burn out. The malfunction is eliminated by replacing the burnt out elements.

Do not replace only a burnt-out device. The second lamp works the same amount of time, therefore, it will become unusable in the near future. In addition, during operation the spectral composition of the radiation changes, so even light sources of the same brand will shine differently.

It often happens that after replacing the headlight still does not work. The cause must be looked for in the fuse block. When the filament filament burns out, current surges may occur that can blow the fuse. If both lamps do not light, the reason lies in the common fuse, and if only one, then the fuse in the circuit of the faulty device must be checked.

When installing new elements, it is prohibited to use homemade inserts or devices of a higher rating. This may cause electrical wiring to melt and catch fire. If the installed fuse burns out again, you need to look for the cause, and not reduce the sensitivity of the current protection.

In-cabinet mounting block PP

In Ford Focus 2, the internal fuse module is located on the passenger side under the glove compartment (glove compartment). In cars manufactured from 2004 to 2007 (pre-styling), to check and replace the PP, you need to pull the latches and remove the top cover. There is a lock there, by turning which you can lower the entire module.

Pinout of the PP of the internal module in the second generation Ford Focus until 2007.

Internal safety block diagram for Ford Focus 2 after 2007 (restyling)