Airbrush on a car: original ideas, photos, pros and cons

Art is a subjective and rather controversial substance. Airbrushing on a car depicting blood is associated by many with aggression and inspires horror, but sometimes it hides a deeper meaning. This type of body coloring is not as common as, for example, pictures of predators or flowers, but there is a trend towards this type of car decoration.

Be careful, there's blood on the hood! or Non-standard option for applying airbrushing to a car

Pattern options

The image of blood on a car can be present in different forms. Themes and variations for airbrush designs with blood are varied. This could be a battle of warriors from a fantasy or modern action movie, characters from horror films, just stains or smudges on the entire surface or on certain areas of the car, for example, splashes on the front side of the hood.

For example, on the Internet you can find a photo of a car completely decorated with airbrushing depicting blood, mystical strange creatures and guards. This work was done based on the illustrations of the artist J. Palencar for the books of science fiction writers, of whom the owner of the car is a fan. Passion, hidden suffering, potential strength - all this can also be depicted on the body of a car using blood airbrushing.

DIY materials and tools for airbrushing

All pictures Moskvich-2150-1 1974
Once upon a time, the airbrush technique was intended for painting cars. Today, paintings painted with an airbrush also appear in the interior. Airbrushing on the walls of an apartment looks especially impressive on large surfaces.

An airbrush allows you to create masterpieces quickly and accurately, but in order to master this technique, the artist needs to become familiar with the theory and practice.

Tools and materials for airbrushing that you will need first:

compressor. Compressors vary depending on power, noise level, presence of a receiver, etc. For home use, we can recommend a membrane compressor (the most primitive of all modifications with low pressure, the main advantage of which is ease of control), an oil compressor (works for a long time, powerful , can produce a jet of paint with a fine spray), an oil-piston compressor (equipped with a cylinder into which you can pump air and work in silence); a hose for connecting the compressor and airbrush and air supply (it is recommended to choose a soft, flexible and lightweight one); airbrush (this is the main tool for airbrushing, which is a small-sized spray gun that fits in the palm of your hand). Airbrushes are produced in different ways. In simple models, the main key controls the paint supply, but it is better to choose a model in which the air supply is also controlled by the keys. With this airbrush you can adjust the intensity of the coloring.

It is also necessary to pay attention to the diameter of the gun nozzle - in order for the drawing to turn out neat, the nozzle should have a diameter of up to 0.3 mm, and for large-scale drawings - 0.5 mm; paints (water-based whites and pigments); matte facade varnish to protect the finished painting; containers with a lid for storing already mixed paints.

How to draw blood on a car?

Airbrushing blood on a car will look more realistic if the finished image is coated with a glossy varnish. It should be borne in mind that shine is more noticeable on protrusions and convex areas, as well as on many objects.

For the most realistic image of blood on a car, airbrush artists use not one, but several paint dilution options, requiring at least three shades. The darkest and thickest is used to draw drops or clots, and the lighter ones are used to depict drip lines. The effect of dried blood is achieved by diluting the varnish with paint.

Source

Types of stencils

Stencils for walls for painting vary not only in the material from which they are made. They also differ in the type of pattern:

Simple or single. The entire drawing is painted with one color. If desired, you can make a gradient - from a darker shade to a lighter one. But that's all. Parts of other colors are not available.
Combined or multi-colored. This is a whole series of templates, each of which is painted with a different color of paint. To ensure that the details of the drawing match, marks are applied to them. When placing the stencil on the wall, these marks are aligned.
Reverse or anti-stencil. This template is cut out according to the reverse principle, that is, what is cut out in ordinary templates remains in this one, and it is these parts that are mounted on the wall. Then paint is applied, but it paints the areas not covered by the stencil. It turns out that there is a halo around it from a different paint, but the drawing itself remains the base color.
For three-dimensional drawings. Decorative plasters and putties are now on sale. They can also be used to apply designs to walls. Stencils for them are made specially - thick, made of polyvinyl up to 4 mm thick. When applying the pattern, the slots are filled with putty and left until dry. The result is a three-dimensional drawing.

It's easiest to work with simple templates. For starters, you can try this type of pattern. If you are confident in your abilities, you can work with more complex combined ones. When working with them, remember that you can remove the film only after the paint has dried.

The most unusual airbrush

Motorists have different attitudes towards airbrushing. Some people consider it a “daub” (“only spoiling the car”), others consider it an art and a way to stand out and show your individuality. Some drivers believe that this is an option for protection from criminals - conspicuous cars are stolen less often than others.

There are motorists who, thanks to airbrushing, express themselves in an interesting and even humorous way, although they do not always suspect it.

It seems that this “bloody” car is a serial killer, at least. Apparently the owner wanted to scare everyone around. And he succeeded. Probably, law enforcement officers are showing increased attention to this driver - his inclinations are very strange. Just in case they find a corpse in the trunk. These machines give me goosebumps.

There are many cars with cute cartoon pictures that reflect the childishness and naivety of the owner. The car immediately shows which characters are popular today, which cartoons have appeared on the screen.

I would like to hope that the “cute” images are used by girls. For a brutal guy, a cat on the hood arouses suspicion.

We are used to the fact that airbrushing mainly shows Hollywood characters - Superman, Joker, Batman, various superheroes. But this motorist is a fan of Russian cinema and depicted on his car a very heartfelt and sweet image of the Soviet Baba Yaga, the beloved heroine of children of many generations. Only Georgy Millyar could play old sorceresses like that!

And this motorist is an obvious fan of the British show “Top Gear”. But he was so upset when everyone’s favorite version of the program was closed due to Jeremy Clarkson’s antics that he placed the presenter on his car in this form.

There are options with tied up girls, but it’s somehow not funny anymore. It raises suspicion whether the driver has made his secret dreams come true. What if there’s a similar prisoner in the trunk?!

A fairly common story with an imitation of a “transparent” car - you look at the picture and imagine what’s in the cabin. An option is x-ray, it looks more interesting and humorous.

It turned out that Russian motorists often use their favorite characters from Soviet comedies for their films: “Operation Y”, “Prisoner of the Caucasus”, “White Sun of the Desert”... Apparently, Soviet childhood and very warm impressions of that cinema take their toll.

Source

Features of choosing your first airbrush

To apply high-quality airbrushing, you will need to carefully select the device itself. It is better to purchase a dual-action airbrush that will effectively control two important processes such as air supply and paint flow. The best option would be to purchase a device equipped with an internal mixer.

When choosing an airbrush, you may encounter certain problems. It is worth knowing that such devices differ in the method of supplying the paint composition. There are two main types:

With a cylinder located on the side. This design is characterized by a certain instability, and during operation the hand is strongly pulled to the side.
With a cylinder located below. The device makes it possible to change vessels filled with beauty, but at the same time use a more powerful compressor.
If the airbrush has a cylinder located on top, the paint is supplied by gravity.

You should not save on this equipment and purchase it from unknown Chinese manufacturers. Such devices fail quite quickly, moreover, it is simply impossible to purchase spare parts for them.

Stalker-69 › Blog › FREQUENTLY ASKED QUESTIONS ABOUT AIR BRUSHING.

1. How durable is the drawing?

The design is covered with a protective layer of varnish, so as a rule its service life is comparable to the service life of the surface.

2. Will the result be the same as the layout?

You can create an exact copy of a picture or photograph used as a layout. However, what is more valuable is the individual vision of the artist, his drawing style, which makes such work exclusive.

3. Is it possible to do airbrushing without a sketch?

You can trust the artist by communicating the theme, location and layout of the drawing.

4. Can I be sure that an airbrush artist will paint me what I want?

Of course, because the approval stage is an integral part of the airbrush application process.

5. Do color and black and white airbrush designs differ in price?

No, because labor costs and all surface preparation operations are the same.

6. How to remove airbrush?

Repaint

7. Is it necessary to somehow prepare the car for delivery for applying an airbrush design?

Basic requirements - the car must be clean, there must be no chips or scratches on the surface. This also applies to cars that have recently left showrooms.

8. Are there any restrictions for washing a car with airbrushing?

There are no restrictions on caring for a car with airbrushing. All care conditions are the same as for a car without airbrushing.

9. Do I need to register airbrushing with the traffic police?

Only with a significant area of the pattern (usually more than 40%). If most of the body is occupied by airbrushing, it is better to contact the traffic police to re-register the color. In the technical passport of the car, in the “Color” column it is written o. The documents required for re-registration of the color of the car must be clarified at the branches of the MREO. In addition, the design on the car should not copy the identification colors of special vehicles!

10.Will airbrushing save you from car theft?

There is hardly a panacea for theft. Airbrushing significantly reduces the risk of car theft, since a car with airbrushing stands out in traffic. In addition, there is a need to repaint elements with airbrushing, which requires additional financial and time costs from car thieves, which makes a car with airbrushing unsightly for theft.

11. Is it possible to insure airbrushing on a car?

You can insure it as an additional insurance. equipment under CASCO.

12. Is it possible to restore airbrushing on a car after an accident?

If photographs of the original appearance of the drawing are saved, then problems with restoration should not arise. It is better to restore the airbrush from the same artist or in the same studio where the drawing was originally created in order to preserve the style of the drawing as much as possible.

What does the price depend on?

Since the application process is quite labor-intensive and complex, the cost for its implementation will not be small. The final amount for the provision of services will be influenced by:

Preparatory operations. This includes cleaning the surface from dust and dirt, washing, disassembling and assembling the vehicle.
The area to which the daffodil will be applied.
The complexity of the drawing being performed, the level of detail.
Number of colors in the palette.
Rarity of colors, number of effects.

It is worth saying that painting the entire car will be a more profitable option. When choosing a specialist, you should pay attention to his portfolio, work experience and customer reviews. It is not recommended to give your preference to the first salon you come across.

To give you a rough guide, it’s worth giving average prices:

One part - 15,000 rub .
Hood — 20,000 rub .
All cars - 200,000 rub .

Pattern options

What to pay attention to when creating butterflies

First, you need to decide on the form. If you don’t have your own ideas on this issue, you can look for suggestions on the Internet. There will definitely be templates and stencils for cutting, as well as examples of finished work. You can also watch the creation of such a panel in the video:

Secondly, you need to choose the colors of future butterflies

After all, the design of any apartment is individual, so it is so important to take time to select the appropriate color option for the future decor of the butterfly on the wall. Use the most successful color combinations, then the decor will best fit into the room and will be in harmony with all the elements

The shape deserves special attention. Today, ready-made multi-colored butterflies are offered in the form of stickers. They can be ordered at any store. They come in a wide variety of colors, as well as simple and intricate shapes. But we are looking at decorations that are made independently, so for beginners it is worth familiarizing yourself with the basic recommendations.

Butterfly stencil on the wall - diagram, photo

At the initial stage, you should create a sketch of butterflies for cutting. Using a program that draws or edits images can help with this. Subsequently, based on the sketch, butterfly stencils are made for cutting out in different sizes from the appropriate material. Templates can be made without even using a computer.

You just need to take a pencil in your hands and create sketches on plain paper or tracing paper - the outlines of butterflies and then cut them out.

Advice! The best option is not to use strict symmetry. And for this you should try not to mirror the wings. It is best to depict them slightly different in size - literally just a little.

Thanks to this, decorative butterflies on the wall will be more voluminous and dynamic. And the applique will look great, regardless of the method of attachment to the surface. But you shouldn’t bend it too much, because the wings should be moderately different from each other.

Stencils of simple butterflies for wall decor, photo

Once the butterfly drawing is ready for cutting, you can move on to the next steps.

It is necessary to decide on the format of the future decorative element, the number of butterflies, as well as the method of securing them. Then you can modify the image and make it in several sizes, and then print it. You can also draw everything completely by hand if you don’t have a printer and cut it out.

After this, we make a butterfly stencil for cutting. It won’t be so difficult to do this if you put the printout on a sheet of cardboard - and the outline of the butterfly is ready for cutting.

The printed silhouette of a butterfly is first trimmed along the outer edge, only then can you proceed to the internal holes and cut them out where necessary using thin nail scissors or a special knife. Butterfly stencils for the wall made of paper - photo of the cutting process

To decorate walls with butterfly decor, you can also use an option such as origami. You will not need to spend energy on drawing the silhouette of a butterfly for cutting out of paper, but will only have to learn the ability to assemble origami.

Important! You should not achieve the grace of a butterfly by increasing the number of folds or frills on the wings: openwork butterflies look more airy.

Further cutting with scissors or a paper cutter will be meticulous and the many details will quickly tire you.

In fact, creating such elements is not very difficult. There are quite a lot of ready-made training videos on the Internet on how to make butterflies on the wall, and also lessons on making origami. Here is one of them:

How to draw blood on a car?

Which plot should I choose?

As a rule, a customer comes to a car repair shop with some idea he already has. However, not all original ideas of clients can be brought to life by masters. That is why the customer should first of all consult with a master airbrush regarding the possibility of bringing the idea to life. The drawing can be very simple (an ornament, for example) or very complex (for example, copying some world-famous work of art).

Good airbrush artists, as a rule, have a selection of drawings on various subjects. Of course, every car owner strives for originality, which means that even if he chooses some standard design, he requires its complete or partial processing and addition of details. Therefore, creating an airbrush sketch based on the customer’s ideas can be called one of the most difficult stages of work.

It often happens that airbrush sketches are redone by designers several times until the design suits the customer’s taste. In some cases, it takes up to several months to create a sketch.
After all, it’s not enough just to create a beautiful drawing, you need to try it on the car. The graphic editor Photoshop is usually used for this. In this way, the customer can clearly imagine how the selected design will look on the car from different angles.

Airbrush options with blood images

Airbrushing blood on a car can be in different designs. Themes and options for airbrushing depicting blood on cars are varied. This could be a battle between fantasy warriors or a modern action movie. Heroes from horror films, just drops or stains on the entire surface or on individual parts of the car, for example, drops on the front side of the hood.

The bloody airbrushing of the body gives the impression that the owner of the car is either a big fan of horror films, or a very angry and aggressive person.

This is often true, but don’t be surprised if you see a girl driving a car with bloody airbrushing. In this way, the owner of the car can convey the beauty, aggression, courage and outrageousness of her nature that coexist together. It is also possible that there are certain artistic or literary preferences.

Sequence of work

3D drawings are applied with a special device - an airbrush, and the area of transformation can be any - a computer, a cell phone, the body of a car or motorcycle.

It is worth noting that, if desired, a car owner can master this science on his own, but no one will give him guarantees of quality workmanship. Professional airbrush – competent application of the image chosen by the customer in accordance with all the rules, the quality of the work is always guaranteed.

Stages of applying 3D images:

Development of a design project. This stage can be called the most important, because the final choice of design determines the appearance of the car for many years to come. When developing a design, you first need to outline the theme of the drawing, determine its intended proportions, choose the style and basic color scheme. Airbrushing is a creative area of transforming a car; the design must match the overall style of the body. Sketches can be created individually, but the cost of their application increases;
Preparing the surface for work. If the car has been in use for some time, its body probably has scratches, chips and dents. Drawings applied to uneven surfaces look pathetic. Therefore, airbrushing is performed only after major body repairs and elimination of existing defects;
Direct application of the image. 3D drawings can be transferred to the surface of a car only with proven automotive paints (for example, DuPont products). If required, the master prepares a stencil or other devices for better execution of the order;
Post-processing. When the images are already applied to the car, they need to be protected from premature abrasion. For this, varnish is used, which, in addition to its protective function, perfectly emphasizes the depth of the image.