The Hyundai Accent gasoline pump is replaced when it fails. Symptoms of a breakdown include an unreasonable loss of engine power and the appearance of extraneous noise in the fuel system. There is no need to immediately go to a service center - any driver can independently diagnose the Hyundai Accent gasoline pump and replace it. It is advisable to familiarize yourself with the sequence of actions and features before starting repairs.
Hyundai Accent fuel filter
To prevent debris from entering the fuel line, the Hyundai Accent has a special filter. As the vehicle is used, the consumables gradually become clogged with debris. A decrease in filter throughput leads to an increase in the load on the fuel pump and can also cause unstable operation of the power unit. To solve the problem, timely periodic replacement of consumables is necessary.
Article number and approximate cost of a branded fuel filter and its analogues
Petrol Hyundai Accents, including those produced at the TagAZ plant, are equipped with a fine fuel filter with catalog number 3191125000. The cost of branded consumables ranges from 400 to 850 rubles. The best analogues of the original filter are presented below.
Table - Analogues of a fine fuel filter for a Hyundai Accent car with a gasoline engine
Manufacturer Article number Estimated cost, ruble
| Parts-Mall | PCA023 | 360-400 |
| Koreastar | KFFH004 | 210-270 |
| Denckermann | A110083 | 190-300 |
| Meyle | 37143230003 | 240-310 |
| SCT | ST308 | 150-195 |
The Hyundai Accent has a coarse fuel filter. The original mesh has article number 3109025000. Its price is 120-140 rubles. Mesh filters from other manufacturers are listed below.
Table - Alternatives to the original mesh 3109025000 for a gasoline car
BrandArticle numberApproximate cost, ruble
| Chrysler | 3109025000 | 410-530 |
| Krauf | KR1111F | 135-170 |
| Market (OEM) | 3109025000 | 395-490 |
Original coarse mesh
Until March 2004, the diesel Hyundai Accent used a fuel filter with article number 3192217400. Its retail price is in the range of 600-1000 rubles. Good analogues of branded consumables are shown in the table below.
Table - Analogs of filter 3192217400 for diesel Hyundai Accent
Manufacturer Catalog number Estimated cost, ruble
| Japan Cars | B30521PR | 175-200 |
| Onnuri | 3192217400 | 320-400 |
| Parts-Mall | PCA024 | 350-410 |
| Denckermann | A120206 | 230-270 |
| Nipparts | J1330513 | 300-370 |
Since March 2004, diesel Hyundai Accents began to be equipped with a fuel filter with catalog number 3192226910. The cost for the original ranges from 1,400 to 2,000 rubles. The best analogues of branded consumables are presented in the table below.
Table - Analogs of branded fuel filter 3192226910 for Hyundai Accent with a diesel power plant
List of companiesArticle numberApproximate price, ruble
| Profit | 15302510 | 265-300 |
| Bosch | 1457434510 | 1050-1370 |
| Delphi | HDF591 | 480-610 |
| Parts-Mall | PCA035 | 290-380 |
| Filtron | PP9793 | 700-1000 |
For diesel Hyundai Accent, the coarse mesh is not sold separately from the glass. It does not have its own article number. If necessary, you need to purchase the entire module assembly, catalog number 311112D410. The cost of a fuel glass is 5700-11000 rubles. Module analogues can be found in the table below.
Table - Analogues of the original fuel module for the diesel Hyundai Accent
ManufacturerFilter articleApproximate price, ruble
| Meat&Doria | 76906 | 1100-1300 |
| Messmer | 770143 | 4400-5700 |
| ERA | 770143 | 4200-5500 |
| Siemens | 405052009003Z | 6100-9900 |
| Sidat | 70407 | 3400-4100 |
Fuel filter location
The fine fuel filter on a gasoline car is located under the hatch located under the rear seats.
The coarse mesh is assembled with the glass. The module is placed in the gas tank.
On a diesel Hyundai Accent, the filter is located in the engine compartment.
Replacing the fine fuel filter
Replacement instructions.
- Open the hatch.
- Disconnect the filter.
- Disconnect the fuel lines.
- Install a new consumable.
Replacing the mesh filter
Replacement algorithm.
- Disconnect the fuel line and terminal block.
- Unscrew the fixing ring.
Replacing the fuel filter on a diesel Hyundai Accent
Replacement on a diesel car.
- Remove the bottom filter cover.
- Release the fuel pipe.
- Remove the filter and move the water sensor from it.
Source: https://zapchasti.expert/toplivnyj-filtr/toplivnyj-filtr-hyundai-accent.html
The fuel pump does not work on a Hyundai Accent - reasons
A modern passenger car has a complex structure and consists of many units. It can be determined that the fuel pump is the cause of the vehicle not working using the following signs:
- The car does not start moving, but the spark plugs are fine, the spark is normal, the engine is running, and there are no flashes in the cylinders.
- There are some flashes in the cylinders, but the engine does not start.
- “Floating” revolutions appear.
- The engine is running, the idle speed is stable, however, when the speed increases or when the car starts to move, the power unit stops.
- The car jerks, engine failures occur, and the car stops pulling.
- The fuel pump on a Hyundai Accent does not pump.
- Fuel pump makes loud noise on Hyundai Accent
The latter - a loud noise - usually indicates that the pump will soon have to be replaced. The original one is quite expensive, so you can choose an alternative - a fuel pump from a VAZ 2110, which is several times cheaper, is suitable for the Accent.
How to replace the fuel pump, read the article “Replacing the fuel pump for a Hyundai Accent”. We also recommend watching a video on this topic.
The symptoms listed above are not always the result of a pump failure. Some of them may occur, for example, when the fine filter is heavily soiled, when the air flow sensor fails, or due to clogged injectors. When the Hyundai Accent fuel pump does not work, it does not buzz or turn on.
Plato personal account: login using login and password
“Platon” (short for “payment per ton”) is a system of collecting compensation for the movement of trucks on federal highways. The measure is mandatory and applies to heavy vehicles with a capacity of 12 tons or more. In simple terms, truck drivers must pay money to the treasury for damaging roads; this money goes towards repairing these roads. To make it convenient, owners of heavy trucks need a Plato personal account. We will explain in detail how to get it and why you need it in this article below.
Registration in your personal account
To register, the user will need a valid phone number and email. To start the procedure, you need to click the “Register” icon on the page lk.platon.ru
The system will prompt you to select your country of residence and type of client:
- individual
- individual entrepreneur
- legal organization
The package of documents required when filling out a personal application form will depend on the payer’s status.
By clicking the “Next” button, the user will be redirected to the “Vehicle Owner Data” section.
1) Individual When filling out a personal questionnaire, the Federal Law indicates the following information:
- last name and first name of the vehicle owner;
- TIN (indicated in the certificate of registration with the tax authorities);
- valid e-mail;
- contact number.
Upon completion of the registration procedure, an information letter will be sent to your email.
2) An individual entrepreneur also fills in his full name, contacts, and enters the current Taxpayer Identification Number (TIN) and OGRNIP.
The system requests the abbreviated name of the individual entrepreneur. If it is absent, this column can be left empty, or the surname of the vehicle owner can be indicated.
3) Legal entity The representative of the organization indicates the following data:
- form of organization;
- full name of the institution;
- abbreviated name of the legal entity;
- official e-mail of the institution;
- contact number;
- checkpoint;
- TIN;
- OGRNIP;
- Legal address of the company.
After filling out personal information, the user proceeds to specifying his location. Federal law and individual entrepreneurs choose the address at the place of registration, as well as the actual one.
Legal entities can mark that the location address coincides with the legal one, or fill out the fields manually.
The applicant also indicates the recipient's bank details, including:
- name of the recipient's bank;
- BIC of the recipient's bank;
- correspondent account;
- checking account;
- recipient's name.
How to check the fuel pump on a Hyundai Accent
Usually, when the fuel pump is operating, a characteristic noise is heard - the sound of the pump motor running. It does not last long, only a couple of seconds after starting the engine. The absence of sound is a clear sign that there is no power to the Hyundai Accent TagAZ fuel pump. If this is the case, the pump will need to be checked. Let's figure out how to check the fuel pump on an Accent yourself.
Checking the fuel pump relay
When there is a problem with the fuel pump, the first thing you need to do is check its relay. It is located in the mounting block, which can be found under the hood. When viewed from the front left wheel, the fuel pump relay on the Accent is located in the middle of the leftmost row and is light blue. To check the circuit and functionality of this relay, you just need to replace it with a similar one and try to start the pump. If the device works stably, the problem is definitely in the relay. If not, you need to look for the problem further. The next step is to check the pump motor.
Checking the electric motor
To check the fuel pump motor, you need to apply voltage to the terminals directly from the battery. This is done as follows:
- Remove the rear seat cushion.
- Remove the fuel pump manhole cover.
- Disconnect the pump block, there are 5 terminals going to it (the top 3 go to the fuel level sensor, the bottom 2 lead to the pump).
In the case when, after the steps taken, the pump starts working, it means that the device is working properly. If not, you will have to look further for the cause of the breakdown.
We use the tester
The check should continue using a special device that will help determine whether voltage is going to the contacts of the block connector. The nominal voltage value is 12 V. If the recorded level does not match, you need to ring the wires from the connector to the mounting block and check the wiring to the fuel pump.
Sometimes, if the fuel pump does not work and the Accent immobilizer is on, the alarm installed on the car can block the start of the fuel pump engine. It prevents voltage from being transferred to the terminals. In this case, the alarm relay is faulty or the alarm itself is installed incorrectly.
Replacing the fuel filter on a Hyundai Accent
The Korean automaker Hyundai is famous for its many budget car models. Accent is rightfully considered one of the best. This model is not only cheap, but also has an interesting design, excellent technical characteristics and the highest reliability.
Repairing a Hyundai Accent is quite a rare matter, but it’s definitely not possible to avoid replacing consumables. Today we’ll talk about exactly one of these procedures, or rather, about the process of replacing the fuel filter of a Korean passenger car.
Fuel filter for Accent
The Hyundai Accent fuel filter is a standard unit of this type, designed for high-quality cleaning of fuel that is transported from the tank to the fuel distribution mechanism and engine. The structure and location of the fuel filter of this model is quite interesting:
- Firstly, primary fuel purification takes place when it first enters the tank, where there is a filter section.
- Secondly, the coarse filtration stage takes place in the gasoline pump, where the filter element of the same name is located.
- And thirdly, spot cleaning of the fuel is carried out in the main filter itself, located a little further than the gas pump along the fuel paths of the car and organizing fine filtration of the fuel.
As a rule, only coarse and fine filters are replaced. The mesh in the gas tank never changes. According to the manufacturer's recommendations, it is advisable to check filters every 8-16,000 kilometers, and replace them every 25-30,000.
Advice! Considering the poor quality of fuel in the post-Soviet territory, in order to organize high-quality fuel purification for the Hyundai Accent, it is advisable to reduce the manufacturer’s recommended time frame for checking and replacing the model’s fuel filters by 1.5-2 times.
How to remove the fuel pump screen for a Hyundai Accent
articles:
- Photo
- How to change the fuel pump mesh in a Hyundai Accent
. Hyundai Accent “Coal” › Logbook › Replacing the fuel pump mesh. Today I finally decided to change the coarse filter, took everything off, disassembled it, and in the end Today I changed the mesh for the first time, according to your article, everything turned out to be not difficult)).
Hyundai accent speedometer needle jumping, solution. Replacing the fuel pump screen on a Hyundai Accent - Duration: START 20 views.
! The Hyundai logo is not just the letter “H” in an aval. It would be too easy. This emblem symbolizes a handshake between two people – a concern representative and a satisfied client. In addition, when translated from Korean, the word “Hyundai” is translated as “modern”.
In general, according to the manual, you need to change the fuel filters and the fuel pump mesh - once every 10 thousand kilometers. Let's move on to replacing the fuel pump screen on a Hyundai Accent. As you probably understand, you will need to remove the pump itself.
But given the low quality of gasoline in some regions, it is better to do this procedure more often. Changing the engine crankcase oil and oil filter. I think it was possible to travel 10 thousand with the old one. Posted more than ki:. To save money, I recommend looking for analogues from VAZ.
Replacing the fuel filter and fuel pump mesh — logbook Hyundai Accent on DRIVE2
Hello, guest Login Registration. We will repair your old man without any problems. Hyundai Accent Club Forum Rules Help Search Users Calendar Let's meet! Search this forum only?. Hello, guest Login Registration I have long wanted to change the fuel pump mesh, but I never got around to it.
And now we’ve arrived, and we’ve also taken our camera with us. First of all, you need to remove the rear seat. It is attached simply - two latches at the edge of the sofa and 2 bolts inside, one on the left, one on the right. The unscrewing process is exactly in the photo. We took off the sofa and put it next to it. We see the plug for the fuel pump system. We remove it, we see the wiring of tubes and power to the pump.
Turn off the power, remove both tubes; the bolt on one of them is removed. Everything is removed, unscrew the lid itself - to do this you need to twist a large ribbed round bar.
If it doesn’t spin well, you can put a screwdriver on it and gently tap it with a hammer. Unscrew the round thing; it’s lying next to it in the photo. We look inside the gas tank and, pressing the pump latch there, pull it up towards you. The condition of the filter is visible to the naked eye. Next, unscrew the screw that holds the bracket. This will allow us to remove the old filter and insert a new one in its place. We look in shock at the old filter.
Hyundai Accent gasoline pump: repair and replacement
The Hyundai Accent gasoline pump is replaced when it fails. Symptoms of a breakdown include an unreasonable loss of engine power and the appearance of extraneous noise in the fuel system. There is no need to immediately go to a service center - any driver can independently diagnose the Hyundai Accent gasoline pump and replace it. It is advisable to familiarize yourself with the sequence of actions and features before starting repairs.
Checking the pressure regulator and fuel system
Before you start replacing the pump, you must check how the fuel system as a whole works. One of the key components is the fuel rail pressure regulator. With its help, the pressure inside the ramp is maintained at the same level. One of the obvious signs of its failure is that the pump is constantly running and does not stop. To diagnose the fuel system, you will need to perform the following steps:
- Relieve the pressure by unscrewing the plug on the fitting.
- If there is fuel inside, there is no need to drain it.
- Remove the fuel compartment cover.
- Remove the fuel pipes from the filter and return fitting.
- Install a pressure gauge in the return gap so that a pressure regulator is present in the fuel system diagram.
- To check the pressure, you need to turn on the ignition - at this moment the pump turns on and starts pumping gasoline. The normal pressure of a working fuel pump should be at the level of 3.5 kgf/sq.m. cm (or 350 kPa).
If the pressure is much lower, it is necessary to diagnose the Hyundai Accent fuel system. It is quite possible that the reason for the poor performance of the fuel system lies not in the pump, but in the associated components. For example, the filter that is located inside the tank (diaper) needs to be changed every 10 thousand km. mileage But if there is no pressure in the rail at all, or it is unstable, you will need to diagnose the pump and, most likely, replace it.
Removing and replacing the gasoline pump Hyundai Accent
Structurally, the pump consists of a pump and a motor that drives it. To replace the fuel pump yourself, you will need to do the following:
- Relieve pressure in the system. To do this, unscrew the fitting in the ramp and wait for the pressure to equalize.
- Disconnect the negative cable from the battery.
- Fold down the back seat.
- Remove the compartment cover.
- To disconnect the wire block, you must gently press the latch.
- Disconnect all pipes from the fuel pump unit.
- Using duckbills, squeeze the clamps and slide them to loosen the hose from the fitting.
- Disconnect the steam pipe.
- Unscrew and remove the ring that holds the fuel module in place.
- Remove the entire fuel pump assembly from the hole in the tank.
Try to carry out all work carefully so as not to damage the level sensor. To replace the pump you will need to do the following:
- Get rid of gasoline inside the block housing.
- If the rubber sealing ring is very worn, be sure to replace it.
- Using a screwdriver, press out the clamp that secures the level sensor.
- Remove the level sensor.
- Disconnect the pressure regulator from the tube - press the clamps with two screwdrivers.
- Inside the glass there is a pump itself. To get it out, you need to press the latches.
- Disconnect the block with wires, remove the cover and remove the spring.
- Disconnect the fitting and hose by releasing the clamp.
- Remove the holders and strainer.
- Remove the damper with filter.
- Disconnect the block with wires from the cover.
- Use a screwdriver to remove the pressure regulator.
- Assess the wear of the rubber rings; it is advisable to replace them.
- Remove the gravity valve.
- Replace the valve O-ring.
- You need to assemble the Hyundai Accent fuel pump unit in the reverse order.
Consequences of untimely replacement
Untimely replacement will lead to failure of the filter and the inability of it to perform its assigned functions, which will manifest itself in:
- increased fuel consumption;
- the appearance of jolts and jerks when driving a car uphill;
- reduction in the power of the power unit as a whole;
- “tripping” of the engine when operating at different speeds;
- spontaneous engine stop when idling;
- the appearance of dips when you press the gas and increase the engine speed;
- spontaneous engine stop if the driver does not press on the gas.
If the filter becomes completely clogged, starting the engine will be impossible.
Replacing the fuel pump Hyundai Accent
Replacing the Hyundai Accent fuel pump will be required when the car engine begins to lose power for no reason, and the fuel system makes noise during operation. These signs will indicate a malfunction of the fuel system, and the most likely cause of the malfunction will be a breakdown of the fuel pump. Replacing the fuel pump on an Accent can be done on your own - let's look at the order in which you should disassemble the system and install a new pump.
Step by step guide
Before replacing the electric fuel pump, you should check the fuel system pressure. To do this, you need to check the functionality of the fuel pressure regulator.
How to check:
- Reduce pressure in the supply system.
- Remove the cover from the fuel module.
- Remove the fuel wire ends from the fitting and the fuel filter.
- Attach to them a device for measuring pressure - a pressure gauge.
- Turn the ignition key and evaluate the indicators of the device.
- The pressure in a properly functioning system should be 350 kPa (or 3.5 kgf/cm2).
- If the pressure is lower, it is enough to replace the fuel filter to eliminate the problem.
If the pressure readings are normal, the fuel pump will most likely need to be replaced. For this operation, it is necessary to prepare in advance a screwdriver with a flat blade, an 8-mm socket head, pliers, a wrench, and an extension cord.
The fuel pump is installed in the fuel module, so you will have to remove it first.
Dismantling:
- Reduce pressure in the supply system.
- Remove the negative terminal of the battery.
- Remove the fuel module cover.
- Press the latch and disconnect the wiring harness block from the module.
- Press the lock and disconnect the fuel lines from the fittings.
- Squeeze the clamp's antennae and then move it along the hose.
- Unhook the steam removal hose located in the vapor recovery system from the module fitting.
- Unscrew and remove the pressure ring of the fuel module.
- Remove the fuel level sensor float from the fuel tank opening and remove the fuel module.
Replacement:
- Drain the remaining fuel into any suitable container.
- Remove the O-ring (a rubber ring that will need to be replaced if it becomes too worn).
- Using a screwdriver, press the locking pin and remove the wiring harness block.
- Next, release the fuel level sensor lock, then move the sensor closer to the fuel receiver and remove it.
- Disconnect the pressure regulator and the fuel pipe - to do this, press the pipe clamps with two screwdrivers.
- Press the latches of the storage cup and remove the fuel pump assembly from it.
- Disconnect the wiring harness block by pressing the fastener.
- Remove the pump assembly cover and remove the spring from the guide.
- Squeeze the clamp antennae, move the clamp along the hose and disconnect the hose and fitting.
- Remove the upper and lower holders with the mesh filter.
- Remove the filter and take out the damper.
- Disconnect the wiring harness connector from the cover.
- Using a screwdriver, remove the pressure regulator from the cover.
- Visually assess the degree of wear of the rubber pressing rings and replace them if necessary.
- Remove the gravity valve by pressing out its two fasteners.
- Inspect and, if necessary, replace the valve O-ring.
- Assembly is carried out in reverse order.
Before installing the pump in the lower holder, its end pin must be inserted into the hole in the fuel filter mesh.
Before connecting the fuel pipe, its tip should be heated with a hairdryer or hot water.
Replacing the fuel pump on an Accent is not so difficult, but if during the description any points remain unclear to you, you can watch the video of replacing the fuel pump.
Fuel pump fuse
The fuel pump fuse controls fuel injection in injection engines. If this part is damaged, the car simply will not move. Therefore, if problems arise with starting the car, the fuse is checked first.
Where is the fuel pump fuse located?
The Hyundai Accent fuel pump fuse is located under the hood in the fuse box in the near row, almost in the center. The fuse is blue. The Accent fuel pump relay is located in the block on the left side (blue box).
Are there any analogues?
When replacing a fuel pump, it is better to use original spare parts or analogues approved by the manufacturer. This will allow you to avoid unforeseen situations and get a guaranteed result.
- Article number of the original Hyundai-Kia fuel pump: 31110-25000
However, some car enthusiasts claim that an electric fuel pump from a Peugeot or a VAZ 2110 manufactured by Bosch is suitable for the Accent. The advantage of installing VAZ pumps is their low price compared to the original.
- Part number of the fuel pump for a VAZ manufactured by Bosch: 0 580 453 453
The fuel system as a whole is an important component of the car; most faults will lead to problems with starting the engine. Often problems are associated with malfunctions of the Hyundai Accent fuel pump - in this case it requires replacement. You can replace the fuel pump yourself by first studying the step-by-step replacement guide.
Source: https://moftop.ru/zamena-toplivnogo-nasosa-khenday-aktsent
Hyundai Accent 1.4 ECONOM › Logbook › Replacing the fuel pump
I was finally and irrevocably fed up with the buzzing of the fuel pump... a few days ago I changed the fuel filter, but no miracle happened, the buzzing didn’t go away, perhaps it became a little quieter... at first I mentally persuaded myself not to worry, to drive until it stopped... especially since there’s practically no noise in the cabin it was audible, but I knew that it was buzzing and it didn’t give me peace... in short, the decision was made - for a replacement... I
began to study the vastness of the drive on this topic - somehow there is little information at all, or it doesn’t break down for anyone, or everything doesn’t work pay attention...
So there are several options: - original - Bosch - Chinese type PMC - universal with VAZ-2110
1) our original is numbered 311111G500, the price is steep to say the least and starts at about 1500 UAH
In general, following a tip from crush2013, I first considered the Denso DFP-0106 pump, its price is around 1000 UAH, it seems to suit us, but it was somehow awkward to take at random...
thanks to the help of z16ri4, another candidate appeared in the pumps under consideration - Bosch 0 580 453 470... according to the Ukrainian existential standard there is no correspondence to our car...
the price on the Ukrainian Exist was simply fabulous - 708 UAH... in general, yesterday at 15-00 I ordered it, today at 18-00 it already arrived at my home (respect to Exist)...
so this is what came to me...
I decided not to delay the installation and immediately went to the garage to install... for comparison, the original and the new
In short, everything went smoothly... I started the car - I couldn’t hear the fuel pump at all... so the problem was solved... time will tell how long it will last...
Source
