Rubber bands for wipers, as a rule, work in difficult weather conditions - rain, snow, icing of the glass surface. Accordingly, they can withstand significant mechanical loads and will quickly fail without proper care. For the driver, not only the duration, but also the quality of their work is important. After all, they provide not only comfort, but also driving safety in difficult weather conditions. The following is information about which rubber bands for windshield wipers are best, as well as a rating of popular brands used by car enthusiasts in our country. It was compiled based on real reviews found on the Internet.
Photo: https://chistoe-steklo.ru/
What to give preference
Oddly enough, but for those who have just become the owner of a car, regardless of whether it smells like factory paint or the car has already undergone more than one repair, experienced car enthusiasts are advised to almost immediately replace the standard wipers with frameless ones.
At the same time, the advice given by advisers most often says that this is the best option for wipers. Of course, with regard to old cars they are right; here it is better to immediately replace not only the wipers. But for owners of new cars, it’s better to start with really high quality. A special feature of frameless wipers is the absence of a metal frame in their design, which ensures a rigid fit of the windshield wiper blade to the glass surface.
Which rubber bands for wipers are better: hybrid or frame?
Frame wipers are good because they ensure a snug fit of the rubber band to the glass, but when the structure is exposed to sub-zero temperatures, the unit will not work until it expands. An elastic band for a wiper with a frame usually cleans better, but is also more prone to squeaks and mechanical failures.
Another thing is hybrid wipers. It is easy to guess that they have all the strengths of frame and frameless ones and at the same time are devoid of disadvantages. Indeed, such a unit is considered all-season and is not prone to freezing, and also has a fairly long service life. True, the high cost scares off many motorists right away.
Car wipers.
Mazda tribute
A car, as you know, is a highly dangerous vehicle. This is where hundreds of people die in road traffic accidents around the world. Car manufacturers and designers work every day to ensure that our lives are safe. Every year technologies and systems are improved, which is, of course, great. Did you know that one of the first systems that can safely be attributed to the safety of the driver behind the wheel of a car was a system for cleaning glass during rain and bad weather. Simply put, the windshield wipers you know.
Types of car wipers.
Car wipers, due to their commonplace nature, no longer look like some kind of super achievement, however, this is not so. At least try driving your car for a few kilometers without them, even in light rain. Why can’t you imagine how? Otherwise!
Although car wipers seem like an insignificant thing, they are very necessary for the driver. Today, of course, we will not see those wipers that were on the first cars, but their descendant #8212 frame wipers, previously popular, and even the most common type of car wipers today.
Frame car wipers.
A metal frame on hinges holds an elastic blade, which, overcoming all the unevenness of the glass, removes water from it. This design has proven itself quite well, however, its hinge elements wear out very quickly, thereby losing reliable contact with the glass, which leads to failures in cleaning and, as a result, poor visibility. And this, as we know, is very dangerous. Therefore, such wipers require frequent replacement. One good thing is that the price for these types of wipers is low and allows them to be replaced regularly without a big hit to your wallet.
Replacing frame wipers.
Replacing frame car windshield wipers is a completely common problem. It is enough to purchase the windshield wipers you need for your car, remove the old ones from their mounts (there is a neat lock that allows the wipers not to fall off while driving), and install new ones in their place. That's all!
For those who are trying to save money, there are sets of replacement rubber bands for this type of wipers. However, I do not recommend that you make such a replacement, the reason is in the lines above: the wear of the frame, even with new rubber bands, will not allow all the water to be removed. The only situation when such a replacement is appropriate is if you use metal-plastic frame windshield wipers; they resist frame loosening much better and the elastic band in them actually lasts much less than the frame itself. Therefore, in this case, replacement will be justified.
Frameless car wipers.
The next type of car wipers that I will tell you about will be frameless ones; their description is in the article car windshield wiper blades. Their design is very simple and original: they are a rubber-plastic body with metal plates made of spring steel molded inside. Their edge itself is made of special rubber in the shape of a blade, which removes all the water from the glass. By the way, some models, like frame models, allow you to replace the cleaning gum directly, without replacing the structure as a whole.
- The advantages of frameless wipers, firstly, include the fact that they are not subject to loosening, unlike the previous type of wipers. Secondly, these wipers are not afraid of ice, which is what their frame colleagues suffer from, where ice blocks the movement of the frame.
Review of manufacturers which brand to choose
UAZ on tracks
Currently, there are several dozen companies engaged in the production of automobile accessories, including windshield wipers, as well as consumables for them. The market offers the buyer both high-quality goods and obvious fakes with frankly disgusting technical characteristics. In order for the purchased device to meet expectations in terms of reliability, quality of operation and performance criteria, you should refrain from purchasing products of “unknown” origin and give preference to products from well-known manufacturers.
According to experts and drivers, the ranking of the best windshield wiper blade manufacturers is as follows:
- The manufacturer Bosch, with its Aerotwin series of rubber bands, occupies a leading position in the sale of goods in Russia. Brushes from Bosch have excellent elasticity, cope well with tasks in any weather, and are characterized by reliability and efficiency.
- Champion rubber bands for wipers occupy second place in the popularity rating among domestic consumers. A decent range of products from this manufacturer allows you to choose the best option for windshield wipers for your car. The products are characterized by excellent performance properties, quality and affordable prices.
- The Heyner brand from a German manufacturer with a series of Hybrid products is confidently included in the ranking of the best, thanks to the high quality of workmanship, compliance of the products with the declared characteristics, and their excellent performance indicators. Heyner products are characterized by an excellent combination of price and quality.
- Wiper blade specialist Denso takes fourth place in the ranking with its Wiper Blade series of hybrid wipers. In addition to wear resistance, reliability and operational efficiency, users note as an advantage the design of the wipers from Denso, which is a real work of art.
- Ween Schimo are windshield wipers of European origin, enjoying decent demand and trust among domestic consumers. We entered the rating thanks to our affordable pricing policy against the backdrop of excellent quality criteria.
Comparison of manufacturers
Today the market offers a very wide range of such products. Many manufacturers are already well known, so the quality and reliability of their products have already been appreciated by Russian consumers.
For example, many positive reviews .
Bosch aero brushes have a slightly lower rating, but this is due to the price. The cost of Mexican products starts from one thousand rubles, and the Bosch brand costs seven hundred rubles.
The Heyner company also produces car wipers. Their hybrid products have the best reviews and consumer ratings. In addition, these brushes are very cheap.
It is recommended to choose hybrid models to replace wipers. They combine durability and excellent user characteristics.
Installation of frame windshield wipers
Pajero mini
Frame glass cleaners are more bulky in appearance, as they consist of a fairly large set of structural elements:
- Pressure plates
- Rocker arms
- Adapter
- Supports
- Hinges
- Blades - rubber bands
The photo below shows this well and clearly
In such wipers, which are gradually becoming a thing of the past, not only the rubber bands are subject to wear, but also the hinges, which fail relatively quickly. Therefore, after 2-3 replacements of a worn blade, you have to change the entire frame structure of the windshield wiper. This is their disadvantage. However, there are also advantages:
- Low cost
- Simplicity of design
- Versatility - interchangeability
General provisions
Wiper blades, along with oils, filters and other elements, are consumable materials and have a limited service life. The service life of rubber bands, depending on their quality criteria and the material from which they are made, can vary from six months to two years. Accordingly, the better the consumables are purchased, the longer the consumer will be able to forget about the need to replace them again. This fact forces you to be very careful when choosing rubber bands for wipers, and to take into account the quality indicators of the product when purchasing.
The design features of the wipers with which the vehicle is equipped are also important when choosing. By design, wipers can be of frame, hybrid and frameless type. Modern cars are mostly equipped with frameless modifications of wipers, which makes it necessary to select consumables exclusively from the catalog and for a specific vehicle model.
The choice of rubber band for frame or hybrid type wipers is less problematic, however, it requires taking into account some parameters that will directly affect the efficiency of the windshield wipers. It is worth noting that frame-type brushes have proven themselves better in terms of mechanical cleaning of the glass surface, however, they have a number of disadvantages such as noise during operation, a high probability of breakdowns and strong dependence on weather conditions. Hybrid models of wipers combine the strengths of frameless and frame products, are characterized by all-season applicability, the ability to adapt to any glass topography and a long service life, however, they are distinguished by a high price, which often determines the car owner’s choice not in their favor
Let's look at the main criteria that are important to consider when choosing a wiper blade.
Rating of the best rubber bands
In order for replacement rubber bands for wipers to work for a long time, you need to buy only high-quality products.
Below we consider several popular product models:
- Heynell. Such products are characterized by quiet operation; usually, even after many months of operation, they operate without noise or extraneous sounds. According to the manufacturer, this effect is achieved as a result of correct calculation of the edge angle. But this option is not particularly suitable for winter.
- Denso NDDS. Despite the high quality of windshield cleaning, as well as a relatively long service life, these products cannot be classified as durable. Usually the first troubles in their work appear after the first winter.
- Sparco. A fairly practical option - the products of this brand have proven to be durable and of high quality. Even during cold weather they work fine. Thanks to the tight fit to the glass, the maximum cleaning effect is achieved.
- Alca. This German-made option is considered one of the cheapest, usually available in sizes of 600 mm. Of course, a low price cannot be due to high quality, however, in this case the ratio of quality and cost is the most optimal.
- Sheron. Czech-made products, available in 650 mm sizes. The high cost is due to good quality.
- Warrior. Such products are available in sizes 500, 600 and 700 mm. Their cost is also affordable and they are characterized by a normal price-quality ratio. But if your budget allows, then it is better to give preference to a more expensive option.
When should you change your wipers?
The situation with the timing of replacement of this element is different. Thus, for conventional frame models, the recommended replacement is once a year, and it is recommended to carry out replacement during the period of seasonal maintenance when switching from winter to summer mode. However, as practice shows, for motorists whose annual mileage is 25,000 km or more, such replacement is carried out much more often, usually in autumn and spring.
The service life of wipers is determined primarily by their original quality and intensity of use.
With frameless models, things are somewhat different; soft material and an elastic plastic spoiler can easily be maintained for 2 seasons for cars with low mileage and garage parking conditions, and 1.5 seasons for cars with high mileage.
Often in winter, when the windshield is covered with a layer of ice, careless handling of the glass cleaning system causes the cutting edge of the frame wipers to fail, the accidental activation of which on frozen glass leads, at best, to tears of the hard rubber or its delamination.
For frameless models, this phenomenon is quite rare, because the elastic holder clearly reacts to all obstacles in its path and simply rises, preventing the silicone insert from deforming.
Rubber bands in blister for frame brush with plastic insert (2/ 24 /60cm) AUTOVIRAZH AV-02422
Photo: https://beru.ru
Rubber bands in a blister for a frame brush with a plastic insert (2/24/60cm) AUTOVIRAZH AV-02422 are installed on the windshield wiper blade. Provide effective removal of water droplets and dirt from the windshield.
Rubber bands in blister for frame brush with plastic insert (2/ 24 /60cm) AUTOVIRAZH AV-02422
Advantages:
- Uniform cleansing
- Graphite coating
- Low noise level
- Long service life
- Reagent resistance
Replacing wiper blade rubber bands
Of course, you can put up with it when graphite or silicone rubber bands for windshield wiper blades squeak. You can deal with this in various ways. But when the wipers stop wiping the glass, there is nothing left to do but change them.
To replace, you only need a screwdriver with a thin blade and pliers.
The wiper is removed from the leash, and the rubber tape clips are bent using a screwdriver. This should be done only enough so that the rubber band can come out of the brush.
Then the plates that hold the shape of the elastic band are removed from it. In this case, you need to remember the direction of the bends so as not to confuse them later, since the elastic band will not be able to press against the glass otherwise.
The plates have recesses where a rubber tape is inserted. It is rare, but it happens when the width of the sample is less than the thickness of the rubber groove. Then, using a thin file, it is carefully expanded.
Sometimes, however, it is enough to find something to soak the rubber of the windshield wiper blades (this is done with gasoline, white spirit or just hot water) so that they work normally again, rather than replacing them with a new set.
Types of wiper blade mounts
Fastening windshield wiper blades - Hook or Hook
This is the oldest and most universal mount. It is usually denoted by the letter “U”. The sizes of the “hook” can vary, the most common are 9x3 and 9x4. Although there are others: for example, some Audi models have very small hooks, and the American Subaru Tribeca B9 has a 12*4 “truck” class hook on the driver’s brush. On Honda Civic 4D/5D of the first years of production, the hook is supplemented with a special profile on the leash, the fastening element is additionally covered with a decorative cap.
The names “Pin in Arm” are also found. This mount is found on cars produced since 2005: BMW 3, Volvo S40, VW Jetta and Passat, as well as on some Mercedes-Benz and Peugeot models.
This mount is very widespread and is used in Volvo, Renault, Ford, Citroen, VW cars.
The “Pin lock” mount is used in Audi, Mercedes-Benz and Seat cars.
This type of fastening is not very common and is used in a number of Renault cars. Previously, this mount was also used in American-made cars.
This type of fastening is very common among European manufacturers and is used in modern Audi, Fiat, Saab cars, as well as in some Mercedes-Benz and Opel models
Mounting Bayonet lock or Bayonet arm
The “bayonet lock” fastening is used mainly in Renault cars after 2004 and Saab. There are modifications of this mount with two holes for fastening with screws; they are used for trucks.
Top lock mount
This type of fastening is not very common and is used in a number of BMW 5 and 6 Series cars.
This type of fastening is not very common and is used in Audi A6 cars.
The universal Multi-Clip adapter was developed by BOSCH engineers in 2009. This adapter fits:
- Side pin
- Push button
- Top lock
- Pinch tab
Please note that this adapter is NOT suitable for hook mounting.
How to extend the life of wipers 8212 by replacing rubber bands
How to protect brushes from wear
Not every driver wants to change wiper blades every six months. Therefore, to do this, it is necessary to monitor their condition and fulfill some requirements for their operation.
Before you start cleaning the windshield, you must first moisten it with water from the sprayer. If the barrel is empty, you can use a plastic bottle or snow. The movement of rubber bands on dry glass can cause damage. There is a lot of dust and sand on the windshield, especially on the rear window. When a dry rubber band passes over them, abrasions and cracks may form on its surface. Of course, this does not happen after just one time, but it is a fact. From time to time the wiper needs to be lubricated or washed with water. And this applies not only to the mechanism, but also the rubber band must sometimes receive a share of lubricant. In winter, special care is required. If you leave the car for an indefinite period of time in the open air (not in a warm garage), then it is necessary to move the wipers away from the windshield. In severe frosts, the rubber bands freeze to the glass. And if at this time you need to use the car, then do not even think about turning on the glass cleaning. This can lead to premature wear of the motor and brushes. When cold weather sets in, it is necessary to replace the washer fluid with antifreeze. This will not only preserve your wipers for a few more seasons, but will also save your fluid reservoir. Since ordinary liquid freezes and causes the tank to crack. High air temperatures and direct sunlight on brushes reduce their service life by half. If you don’t want to buy new brushes after the summer, don’t be lazy to remove them from your car. The withdrawal procedure will take you a couple of minutes and will save you several hundred rubles. You can get into the habit of wiping the glass while refueling your car or every time you use it. The most vulnerable part of the (frame) wipers is the hinges. They're worth keeping an eye on. When dust gets on them, they cause corrosion and premature wear. The hinges must be lubricated with any means. Otherwise, the windshield wiper will have to be replaced. It is not recommended to use the wiper when there is a layer of snow on the windshield. It is better to sweep it away by hand or with a scraper. And only after that, turn on the wiper to clean the wet glass. Do not turn on the wiper when the glass is covered with a layer of ice. Rubbing the rubber bands against the surface will lead to the appearance of cracks and cuts, and this, in turn, #8212 will lead to poor cleaning of the front or rear windows
Before purchasing new items, pay attention to their condition. Carefully check their surface for damage.
Remember, the cheaper the wipers, the worse their quality of work. It’s better to pay once, but drive with normal windshield wipers for more than one year.
Replacing rubber bands on windshield wipers
Even if you have never done this, removing them yourself will not be difficult.
It is important to consider that there are three types of wipers and several types of fasteners that attach the elastic to the base (ribs). Prepare the necessary tools - pliers, a knife and scissors. Replacing rubber bands on wipers is quite simple and does not take much time.
Replacing rubber bands on wipers is quite simple and does not take much time.
The windshield wiper arms must be raised (away from the windshield). Next, you need to stick out the old worn rubber bands. To do this, we find their place of attachment to the guide arms and disconnect them using pliers
It is important not to overdo it with the clamps. They need to be bent a few millimeters (2-3)
Otherwise they may be damaged. Each elastic band is detached along with the edge on which it is located. Some sets include not only elastic bands, but also these ribs. If they are, by all means, use them. If not, use the old ones. The new elastic band must match the size of the old one. Therefore, if necessary, cut it to size. The new part is inserted in place of the old one (into the grooves), after which the mount is fixed. The ribs are installed in their original place.
Since you had to replace the wipers, you can at the same time lubricate the entire mechanism or rinse it with clean water. You can make driving a car more comfortable. To do this, it is enough to install normal windshield wipers.
Video #171 Replacing rubber bands on wipers #187
The recording shows one of the ways to extend the life of wipers. Watch the video and find out how you can change the rubber bands on them yourself.
How to change rubber bands on frameless wipers
You need to start with a long brush. Take it in your hands and look carefully. You will notice two caps along the edges. And you need to remove exactly the one that holds the elastic band. It’s easy to find out the correct plug: just move the rubber band left/right. If you see that one of the sides is motionless, then you need to remove this particular plug. To do this, you will need a simple flat-head screwdriver that can be used to pry off the plug without damaging it. If you are not mistaken, then under the plug there is a rubber band retainer.
Now you need to bend it three to four millimeters so that it releases the old elastic band. We get rid of the worn-out part and insert a new one in its place. If it is too tight, you can lubricate the rubber band with soap, which will make the work much easier and increase glide. The size of the elastic band should match the base; you won’t have to cut anything. Be sure to press the clamp back to secure the new rubber brush piece. After this, replace the plug. The first part of the work is finished.
Replacing rubber bands on frameless wipers also involves working with a short brush. The beginning of the actions coincides with those already described. You will need to figure out which side the latch is on. Then remove the plug, bend the clamp and remove the old rubber band.
But then some small difficulties await you. The fact is that the new elastic band will be longer than the one that was before. What to do in this situation? Insert the rubber band as far as possible, then press the lock back. After this, use a sharp knife to cut the elastic band to the very end of the brush.
Problem solved. All that remains is to put the plug back in place.
Many people perceive information better from video master classes. If you want to learn how to replace rubber bands on windshield wipers in a video, then carefully follow the actions of the experts. They use the most common tools that can be found in every garage and even in every home. Plus, you don't need any special skills to replace the brushes on your car. Even a person who is not very familiar with its device can do this.
But still, experts advise changing the rubber bands no more than two or three times on the same wipers. After all, the main structure also wears out and requires replacement.
Self-replacement of frameless wiper rubber bands
Theoretically, all replacement work can be carried out independently, without the involvement of specialists, but for this it is useful to know the features of the entire process.
Before replacing wipers, you should carefully inspect those that are already installed. If the replacement is complete, then when choosing a model that is suitable in length, be sure to make sure that the kit includes fasteners for the appropriate model.
- The replacement must begin by pulling out the holders and placing a fabric folded in several layers or a thick notebook on the glass. Quite often, a poorly secured holder that slips will break the windshield, so such a safety device is quite justified.
- Carefully, without tension, the plastic retainer of the wiper becomes obsolete and the structure is removed from the holder. The holder can be carefully lowered onto the windshield.
- A lock suitable for this model is installed on the unpacked new wiper. The wiper is easily inserted into the holder and secured in position with a latch. After this, the protective strip is removed from the elastic band. The cloth is removed from the glass and the windshield wiper is installed in place.
Another feature of this type of product is that some manufacturers select it according to the operating season, so before changing the rubber bands on frameless wipers, you need to make sure that these are suitable “summer” or “winter” or “all-season” rubber bands.
Let's sum it up
The cost of a set of frameless wipers depends on several factors, mainly the brand recognition of the manufacturer and the make of the car.
How to disassemble a frameless wiper
The best winter windshield wiper blades, according to reviews. 2020
Disassembling a frameless brush and changing the rubber band in it is quite simple and you can do everything yourself. To do this you will need:
- flat screwdriver;
- replacement cleaning tape;
- pliers;
- scissors.
Now the actual algorithm for disassembling the wiper and replacing the tape.
- First of all, you need to remove the old brushes from the machine. On some car models, this may require moving the brush arms to the service/winter position.
- The next step is to disassemble the brush. To do this, you need to remove the outer plastic plugs that are held on by a latch. The latch is held by a tongue on an elastic steel element that runs along the entire brush. To remove the latch, you need to crawl under the plug from the non-working side of the brush with a flat-head screwdriver. Insert the screwdriver deeper and then remove the plug. In general, the procedure is quite simple and quite doable, but pressing the latch for the first time is quite difficult, it is difficult to feel.
- After you have disassembled the wiper, you need to pull out the old tape. It is fixed on one side with a steel tongue. You just need to bend the tab and after that you can easily pull it out. All
- Then everything is in reverse order. That is, insert a new elastic band and, if necessary, cut it to the desired size with scissors.
- Squeeze the rubber fastening tab.
- Replace the plugs along the edges of the brush and the brush itself on your car.
- Don't forget to repeat the same steps with the second brush. The rubber bands of frameless brushes should always be changed in pairs.
Self-replacement of frameless wiper rubber bands
Theoretically, all replacement work can be carried out independently, without the involvement of specialists, but for this it is useful to know the features of the entire process.
Before replacing wipers, you should carefully inspect those that are already installed. If the replacement is complete, then when choosing a model that is suitable in length, be sure to make sure that the kit includes fasteners for the appropriate model.
- The replacement must begin by pulling out the holders and placing a fabric folded in several layers or a thick notebook on the glass. Quite often, a poorly secured holder that slips will break the windshield, so such a safety device is quite justified.
- Carefully, without tension, the plastic retainer of the wiper becomes obsolete and the structure is removed from the holder. The holder can be carefully lowered onto the windshield.
- A lock suitable for this model is installed on the unpacked new wiper. The wiper is easily inserted into the holder and secured in position with a latch. After this, the protective strip is removed from the elastic band. The cloth is removed from the glass and the windshield wiper is installed in place.
Another feature of this type of product is that some manufacturers select it according to the operating season, so before changing the rubber bands on frameless wipers, you need to make sure that these are suitable “summer” or “winter” or “all-season” rubber bands.
Let's sum it up
The cost of a set of frameless wipers depends on several factors, mainly the brand recognition of the manufacturer and the make of the car.
A set for a budget foreign car can cost from 1100 to 1400 rubles, while replacement rubber bands will cost from 350 to 500 rubles for a pair 50 cm long.
Replacing wipers on your own with a frameless model is not a big problem and can be done independently either as a ready-made kit or by replacing only the rubber bands, so with minimal skill you can save a significant amount by spending a little time.
- Next What to do if the brake pedal fails after replacing the pads
- Back Avoiding a fine for gas equipment on a car: how to install gas equipment with registration in the traffic police
- Aug 6, 2019
- Aug 5, 2019
- Hyundai crossovers / News
Aug 5, 2019
- Aug 3, 2019
- Legislation / Taxes and fines
Aug 2, 2019
- Aug 1, 2019
- April 13, 2019
- March 12, 2019
- Feb 17, 2019
- April 11, 2019
- July 27, 2017
Popular crossovers
Acura crossovers Audi crossovers BMW crossovers Cadillac crossovers Chevrolet crossovers Chery crossovers Citroen crossovers Dodge crossovers Ford crossovers Honda crossovers Infiniti crossovers Jeep crossovers Hyundai crossovers Kia crossovers Lexus crossovers Lada crossovers Land Rover crossovers Mazda crossovers Mercedes crossovers Mini crossovers Mitsubishi crossovers Nissan crossovers Porshe crossovers Peugeot crossovers Crossovers Opel Crossovers Renault Crossovers Ssang Yong Crossovers Skoda Crossovers Subaru Crossovers Suzuki Crossovers Toyota Crossovers Volkswagen Crossovers Volvo Crossovers
How to disassemble a frameless wiper
Disassembling a frameless brush and changing the rubber band in it is quite simple and you can do everything yourself. To do this you will need:
- flat screwdriver;
- replacement cleaning tape;
- pliers;
- scissors.
Now the actual algorithm for disassembling the wiper and replacing the tape.
- First of all, you need to remove the old brushes from the machine. On some car models, this may require moving the brush arms to the service/winter position.
- The next step is to disassemble the brush.
To do this, you need to remove the outer plastic plugs that are held on by a latch. The latch is held by a tongue on an elastic steel element that runs along the entire brush. To remove the latch, you need to crawl under the plug from the non-working side of the brush with a flat-head screwdriver. Insert the screwdriver deeper and then remove the plug. In general, the procedure is quite simple and quite doable, but pressing the latch for the first time is quite difficult, it is difficult to feel. How to disassemble a frameless wiper - After you have disassembled the wiper, you need to pull out the old tape.
It is fixed on one side with a steel tongue. You just need to bend the tab and after that you can easily pull it out. All Disassembled frameless wiper - Then everything is in reverse order. That is, insert a new elastic band and, if necessary, cut it to the desired size with scissors.
- Squeeze the rubber fastening tab.
- Replace the plugs along the edges of the brush and the brush itself on your car.
- Don't forget to repeat the same steps with the second brush. The rubber bands of frameless brushes should always be changed in pairs.
What types of windshield wiper blades are there and how to replace rubber bands on wipers with your own hands
Let's highlight two main types of windshield wiper blades (old and new).
To the old type of brushes
These include wipers
whose frame is made of a metal alloy and the rubber part is secured in several places with metal clips
.
To a new type of brushes
These include lightweight design wipers
with a flexible guide, onto which an elastic band is placed and secured on both sides with plastic latches
.
Replacing the rubber element on old type wipers
. Disconnect the blades from the windshield wiper arms by unfastening them from the locks. Using a screwdriver and pliers, bend the brackets securing the rubber element. Pull it out along with the two metal guides. Take a new rubber band and insert the guides into it. Insert into the frame and, one by one, carefully clamping the brackets (being careful not to break them off), assemble the windshield wiper.
Now let's look at how to replace the rubber bands on a new type of wipers with your own hands.
. Disconnect the brushes from the leads. Using a screwdriver, carefully pry up the plastic clip at the end of the brush and remove it. Unclench the holder and pull out the rubber element. Reassemble in reverse order.
How to try to protect your windshield wiper blades from premature wear
- It is advisable not to leave the car in a place exposed to direct sunlight in the summer. If this cannot be avoided, it is better to remove the brushes.
- In winter, to avoid the blades freezing to the windshield, it is better to raise the leashes and leave them in this position until the car warms up. If the wipers are still frozen, it is better to wait, without turning on the windshield wiper, until the car interior warms up and the windshield thaws.
- Glass with heavy dirt and leaves, branches, etc. stuck to it. It is better to first brush it off with a brush or wipe it with a rag to prevent solid particles from getting under the wiper rubber.
- When choosing wipers, do not buy dubious, cheap fakes. Give preference to well-known manufacturing companies; their products, as a rule, are made of good materials and are of good quality.
- Silicone rubber bands have proven themselves to be quite good. They are characterized by good elasticity and durability.
- It is also recommended to use two types of wipers - winter and summer. Winter windshield wipers have a closed cover to prevent snow from sticking, so they do a better job of cleaning in winter and do not freeze to the windshield.
DIY replacement
How to change windshield wiper blades on windshield wipers yourself video
I would like to point out right away - before carrying out repairs, look at the mounting location near the leash. My non-original windshield wiper broke, it has a plastic bushing and it simply fell apart! Restoring this sample DOES NOT make any sense, it will still rattle on the windshield.
IN the original, but worn version, the fastening is based on a metal bushing, it is of very high quality and durable, which is what needs to be repaired.
I think there is no need to explain that the “repair tape” is longer than our standard ones; you just need to cut it with scissors (or a knife) to the desired length.
Since I have two options, I’ll show you how to change on each:
Replacement with BOSCH
- This windshield wiper has plastic latches on the sides, we need to remove any of your choice (right or left).
- Just hook it up with a screwdriver
We pull, the latch comes off, look at the photo
Take out the rubber band and replace it with another one.
Then simply close the plastic cap
Just like that, easy and simple.
Repair of the original brush
At first, everything here is even easier than that of a competitor. There is a button on one side, press it and the plastic holder comes out.
Pull out the rubber band. But at one end we have a plug hanging
- The thing is that it has a metal clip (like an alligator clip) that prevents the plug from falling off. To begin, simply remove the rubber band from the “plastic”
- Now we open the crocodile, I did it with a screwdriver
We hang it on a new elastic band and clamp it with pliers
We insert it into the plastic, insert the tape into the attachment point and snap it onto the end.
As you can see, everything is also very simple.
To sum it up, my DIY restoration cost me only 85 rubles for a repair rubber band! THIS IS VERY BUDGETARY! The windshield is cleaned very effectively.
Now the video version of the article is more clear.
I’ll end here, I think my information was useful to you. Sincerely yours, AUTOBLOGGER.
Similar news
- Mirror lamps (chrome plated)
- Drive compressor or air blower. Pump up your car
- RAPTOR coating. How to protect a car body
Selection of wiper blades according to the composition of the material used
The shape of the product, its dimensions and mounting structure are important parameters of choice, however, the primary task of wipers is the high-quality removal of dirt, moisture and other elements from the glass that complicate the driver’s visibility of the road, which is performed directly with a rubber band. The cleaning efficiency directly depends on what material the rubber band is made of.
Previously, all rubber bands for windshield wipers, without exception, were made of ordinary rubber, however, a large number of shortcomings of such elements, such as squeaks, freezing in cold weather, mechanical damage due to temperature changes, led to the need to find more effective materials for wipers. To ensure high-quality cleaning of the windshield surface, the material of the rubber bands for windshield wipers must have the following parameters: wear resistance, elasticity, constant performance under temperature changes and immunity to components of automotive chemicals with an aggressive composition.
Manufacturers continue to search for a unique material for wiper rubber today, however, there have been certain achievements in this industry. Today there are several types of wipers based on the material they are made of:
- products with graphite coating;
- rubber bands with the addition of graphite;
- silicone rubber bands;
- elastic bands with yellow stripes and Teflon.
With such a variety of options, many car owners have an adequate question: how to choose an elastic band for a wiper based on the material of manufacture, so that it copes with the tasks as efficiently as possible? Today, the best purchase option is silicone rubber bands; they are recommended by professionals and consumers due to their excellent wear resistance, quality criteria and serviceability at any time of the year.
Selection of windshield wiper blade by size
Size is one of the main criteria when choosing a windshield wiper blade. On the market you can see a huge assortment of brushes, which differ not only in manufacturer and type, but also in the length of the products. When asked what length brushes are best to purchase, the answer from professionals and car manufacturers is clear: this parameter should correspond as closely as possible to the standard dimensions of the rubber band installed on the car from the factory.
The fact is that having bought even good rubber bands for windshield wiper blades of inappropriate length, the buyer may be very disappointed in the process of their operation. Brushes that are too long will cling to each other during operation, while the purchase of short rubber bands will affect the area of the surface to be cleaned, which the devices will not be able to capture in sufficient volume, which will affect a decrease in safety. To avoid problems of this kind after installing new consumable parts, it is necessary to measure the length of the windshield wipers installed on the car before purchasing.
