Removing the airbag from the steering wheel of Ford Focus 2: description, processes
Content
To remove the steering wheel on a Ford Focus 2, you need to remove the driver's airbag. Dismantling will be required when repairing the steering column and other operations, such as tuning the interior.
Video material
The video will tell you how to quickly remove the driver's airbag from a car with your own hands.
Dismantling process
Removing an airbag is a complex process and should not be rushed, since instead of removing it, the element will be triggered and replaced. First of all, you should stock up on the necessary tools: torx sockets, a 10mm wrench and, if you need to remove the steering wheel, a 24mm socket.
Warning! It is imperative to disable the airbag control unit. If this is not done, then we will 100% get hit by a deployed airbag, which will lead to additional costs and problems.
So, we remove the airbag from Ford Focus 2 with our own hands:
- Turn off the power. Worth understanding! When working with automotive pyrotechnics, after turning off the power supply, you should wait 5 minutes.
- Remove the top cover of the steering column casing for ease of operation.
- Turn the steering wheel 180 degrees and disconnect the latches. We also unscrew the mounting bolt.
- Now we turn the steering wheel 90 degrees and perform the same operation on the other side.
- We pick up the steering wheel trim to release the latches.
- Disconnect the wiring harness. Remove all wires from the steering wheel trim. We dismantle the airbag.
- Assembly of the element is carried out in the reverse order.
Conclusion
Removing the driver's airbag from a Ford Focus 2 yourself is easy. It is worth not forgetting about important elements of the process, such as turning off the power, because if this is not done, the airbag will work.
Changing the driver's airbag
Changing the steering wheel is not that difficult, but before doing this you need to disconnect the terminals from the battery. Firstly, this will ensure the safety of work, and secondly, the sensor will be turned off and the on-board computer will not think that removal was carried out.
Otherwise, the on-board driver will record an error. Your task is to remove the central part of the steering column, disconnect all the contacts and remove the cushions, and therefore install a new one in the reverse order.
How to remove the steering wheel of a Ford Focus 2
Tools
screwdrivers, including a screwdriver with a long blade; set of keys and sockets; Add a good couple of long screwdrivers here and you can start dismantling the steering wheel.
Or a key for ten - a head for 24. With a wrench and a flat-head screwdriver.
set of heads
If a replacement is made, then, of course, you need to stock up on a new steering wheel. If we are talking about repairing the steering, then other relevant parts.
Preparing to remove the steering wheel
Before you begin to unscrew the steering wheel, you must disconnect the terminal from the battery. Work can begin in a couple of minutes.
The whole point is that you need to wait until the capacitor on the driver's airbag discharges. If this is not done, the device will fire when the steering is disassembled and the steering wheel is removed.
As we can see, what can happen if you are not careful when removing the airbag is that after it is triggered, you can throw out the steering wheel.
What happens when the steering airbag deploys?
Instructions for fixing or removing the steering wheel
So, for example, this piece of article is recommended for removing the steering wheel airbag and which fuse to pull out from the block located in the interior of FordFocus 2.
This method is like a safety net, as a way to disconnect the “minus” from the battery. However, this is all unreliable. And therefore it is better to disconnect the battery terminals. this does not bring the desired result, only the opposite.
When the two airbag latches are removed, the horn may sound. As a result, you will have to snap the fasteners again.
Battery how to disconnect the power cable
Another tip for inexperienced owners, who do not listen to various advice where you have never done this in practice, a pro can actually do it and save time on this: remove all the necessary tools and equipment from the trunk before disconnecting the battery. Algorithm of actions when dismantling the steering wheel of a Ford Focus 2. A very convenient approach is made for unwinding the screws from the bottom of the steering column casing.
Use a screwdriver to pry it near the steering wheel and remove the upper casing. Close the area where the casing was removed to protect it from dirt and dust while working and nothing falls into the lower part. During dismantling, by the way, about 30 minutes pass, enough time to discharge the airbag capacitor. Turn the steering wheel half a turn to the left from a straight position.
Using a long screwdriver, engage the first latch on the iron one that holds the pillow mounting frame. Continue turning in the same direction, snapping off the remaining two fasteners. Carefully remove the airbag and move it away from the steering wheel.
Press the clamps of the terminal and disconnect it, disconnecting the wires of the 3rd connector. Remove the airbag module. Using a flathead screwdriver, press down on the horn terminal and remove it. Unscrew the steering wheel mounting bolt. Mark the location of the steering wheel relative to the shaft and return the steering wheel to its place.
- How to remove the steering wheel on a Ford Focus 2: (watch the video.)
- Disassembling Ford, remove the airbag from the steering wheel. (Watch the Video)
Tools
screwdrivers, including a screwdriver with a long blade; set of keys and sockets; Add a good couple of long screwdrivers here and you can start dismantling the steering wheel.
Or a key for ten - a head for 24. With a wrench and a flat-head screwdriver.
set of heads
If a replacement is made, then, of course, you need to stock up on a new steering wheel. If we are talking about repairing the steering, then other relevant parts.
The procedure for removing the steering wheel from a Ford Focus 2
As part of tuning planning, many Ford Focus 2 owners pay close attention to improving the interior of their car. It is in the cabin that the driver and passengers are located, so improvements are usually aimed at increasing the comfort of being in the car during the trip. Functional improvements include:
- sound insulation Ford Focus 2;
- replacing seats with more comfortable ones;
- lighting and illumination equipment;
- replacement of standard car radio;
- adding new or more advanced elements to the control panel.
Now let's talk about repairs
Of course, anyone can handle replacing the boot. Well, what to do in more complicated cases?
Usually, when repairing or replacing some steering parts, you cannot ignore a number of such actions:
- Remove the shaft and grind it on a grinding machine.
- Remove corrosion and wear from its surface.
- Replacement of necessary parts or putting in order those that are out of order.
- Surface treatment with babbitt - a layer of chrome - increases wear resistance.
- Polishing.
Restoring the rack on a Ford Focus 2 is no exception. And in order for our steering to be like new, it is necessary to replace the oil seals and anthers.
Removing and replacing the Ford Focus 2 steering wheel
Car enthusiasts are looking for how to remove the steering wheel on a Ford Focus II in various situations. This may be a desire to replace the steering wheel, adjusting various components of the dashboard, installing a more convenient steering wheel shape, and so on. To properly disassemble the steering wheel of a Ford Focus 2, you need to follow some recommendations, which we will talk about in this material.
Preparing to remove the steering wheel
Often, when removing the steering wheel, car owners are afraid of the airbag, which can become blocked, shoot out in the process, or fail. We want to reassure you in advance - this product can be easily removed while maintaining the styling. If you remove the steering wheel and dismantle the Airbag correctly, no emergency situation will occur.
To dismantle the second generation Focus airbag, you need the following tool:
- Torx star;
- Head 24;
- A 10mm wrench for unscrewing the battery terminal.
Before you begin dismantling and replacing the steering wheel, you need to make some preparations to prevent the activation of the airbag. Before starting work, be sure to disconnect the negative terminal of the battery and wait more than 5 minutes so that the Airbag activation capacitor is completely discharged. You should not open or repair this unit yourself or apply voltage to its terminals.
ugra.ru
Summary:
Leather steering wheel trim for Ford Focus II, Ford C-MAX I (2007-2010
Review:
Leather steering wheel trim for Ford Focus II (C307) 2005-2011, Ford C-MAX I (DM2) 2007-2010, Ford Tourneo Connect (PU2) 2010-2013, black.
Leather steering wheel trim for Ford Focus II (C307) 2005-2011, Ford C-MAX I (DM2) 2007-2010, Ford Tourneo Connect (PU2) 2010-2013, black. Leather steering wheel trim for Ford Focus II, Ford C-MAX I (2007-2010) RUB 1,550
Steering wheel braid “Leather steers” Ford Focus II (C307) 2005-2011, Ford C-MAX I (DM2) 2007-2010, Ford Tourneo Connect (PU2) 2010-2013, black. Leather steering wheel trim for Ford Focus II (C307) 2005-2011, Ford C-MAX I (DM2) 2007-2010, Ford Tourneo Connect (PU2) 2010-2013, black.
Changing the headlamp bulb on a Ford Focus CMax
Comments 26
On our strategically important website you will find plans for construction in the residential areas of the impudent invaders. Lawlessness arises here and now! You must slow down enemy industry! You have a chance to betray enemy values! Use it!
Well, yes! Don't tell tales!
Yes indeed. It happens. Let's discuss this issue.
Well, actually, a lot of what you write is not entirely true... Well, oh well, it doesn’t matter
