Installing a tow bar on Nissan X Trail T31, T32 and connecting the socket

Hello, dear friends! Many who buy SUVs and large crossovers expect to get the most out of the vehicle's potential. Some people install a trailer hitch for these purposes in order to be able to operate a trailer as well. That’s why today we’re talking about the towbar for the Nissan X Trail.

This is a fairly popular car in Russia and the CIS countries, therefore the issue of selecting and installing a trailer hitch remains relevant in Moscow, St. Petersburg, Novosibirsk, Chelyabinsk and in my native Volgograd, as well as hundreds of other cities.

Agree that nowadays buying something in an online store or in specialized offline auto parts stores is not a problem. There would be money.

I would like to provide some clarity regarding the selection and installation of a trailer hitch on the X-Trail manufactured by Nissan, which, depending on the model year, is divided into T30, T31 and T32. The advice will be the same for all these cars.

Features of the tow hitch for Nissan XTrail

The X Trail t31 towbar is attached to the car body using a special plate, where there is a socket with a number of connectors, here is a list of them:

right turning light;
left turning light;
rear fog light;
reverse signal;
signal wire;
stop signal;
12 volts from the battery;
12 volts during ignition;
license plate pendant and left side lights;
license plate pendant and right side lights;
ground for pin number nine;
ground for pin number ten;
grounding of contacts.

It is important to know! Many motorists believe that a towed product, in addition to its main functions, also performs protective functions in case of emergency situations. There is an opinion that in such a situation the product will take the blow, preventing significant damage to the rear bumper on the X Trail

But this is nothing more than a delusion. In addition, traffic regulations in a number of countries prohibit driving with a tow bar without a trailer.

General information about the towing device

A towbar is a towing device necessary to create a reliable connection between a car and a trailer. To attach the towbar to the car, a special platform is used, which has a socket with several connectors. The socket outlets have their own names:

· rear fog lamp,
right and left turn (two separate outputs),
· 12 volts from battery,
· 12 volts at the moment of ignition,
· reverse,
· signal wire,
· brake lights,
· number pendants and left/right side of dimensions (separate sockets),
· grounding for the 9th and 10th contacts (separate sockets),
· contact grounding.

There is a category of drivers who believe that the purpose of a towbar is to protect the car in the event of an accident. This opinion is based on the fact that in the event of a collision, the tow bar supposedly takes the entire impact, thereby protecting the rear bumper. However, this assumption is not entirely correct. Moreover, driving with a towbar without a trailer is quite dangerous, which is why in some countries the rules prohibit moving a car in this case. But the whole point is that in the event of an accident, the car body suffers more with a towbar than without it. Therefore, it is good if the towbar can be dismantled and installed again. Therefore, you can protect yourself and your car from unnecessary risk.

Tips for use

In order for the traction coupling device to serve for a long time, you need to follow some recommendations for its operation:

When the load is over 100 kg, you cannot move at a speed above 90 km/h.
When not using the towbar, it must be covered with a special cover. If the design of the device allows, then it is better to remove the coupling hook.
The traction coupling device is regularly wiped from dirt and moisture.

A towbar is a part necessary for transporting trailers and towing other vehicles. If you have certain skills and a set of tools, you can install the trailer hitch yourself.

Additionally, it may be useful

For some models, you may need to purchase additional wiring. It is used to create the ability to connect electrical appliances. The kit includes a socket and wires. Electrical installation usually occurs simultaneously with the installation of the towbar itself, so it is best to purchase them at the same time. The cost of such an addition will be about 5,000 rubles.

Wiring is also divided according to car generations, so be sure to check the year of manufacture.

Installing a tow bar

After selecting the appropriate towbar model, it must be installed on the vehicle. Motorists install the tow bar for the Nissan X Trail T31 themselves.

Before installing the towbar on the Nissan XTrail, the following preparatory measures are carried out:

The car is driven to a viewing hole, overpass, or the rear part is raised with a jack. Next, remove the rear wheels.
The side plastic moldings and mudguards are removed.
Disconnect the fog lights and tail lights.
Remove the rear bumper.
Remove the rubber bands securing the rear amplifier and muffler.
The trunk floor and trim are dismantled and the spare tire is removed.

After completing the preparatory work, you can directly begin installing the traction coupling device on the car.

Equipment

The standard equipment of the traction coupling device includes:

Installation instructions.
Installation wires.
Seven-pin socket.
Fastenings.
Protective cap.

Installation

After preparation, begin assembling the towbar structure:

A towbar is screwed in place of the bumper reinforcement. The bolts and nuts do not need to be over-tightened.
Trimming is required to route the towbar socket wires. It is done at the bottom of the bumper using a jigsaw.
Next, connect the towbar socket to the car's electrical wiring.
Tighten the fastenings and carefully check the operation of the trailer's electrical devices.
Install the muffler, rear bumper, moldings and trunk lining in the reverse order of removal.

Connecting the socket

To connect lighting devices located on the trailer, use a socket that is installed together with the towbar. A seven-pin socket with a 13 pin cable is used as standard electrics. However, if this element was not included in the package or it is damaged, then use universal sockets to connect electrical equipment.

When connecting, use the following pinout diagrams:

The connection is made according to the following scheme:

Left turn signal.
Anti-fog headlight.
Minus.
Right turn signal.
Right side light and license plate light.
Stop signal.
Left side light.

Also, when connecting, focus on the color of the wires:

Red – side lights.
Brown – left turn signal.
Orange – fog light
Yellow – stop light.
Green – reversing light.
Gray – right turn signal.
Black – mass.

List of electrics, communication with which should be carried out through the tow bar

A properly installed mount allows you not only to secure the load, but also to connect the electrical systems, which is necessary when towing a trailer. The normal functioning of the electrical system allows you to duplicate the warning lights, turn signals and brake lights on a trailer or van. This is a necessary rule for safe transportation.

The mounting kit includes a plate with sockets and pins for the following connectors:

Right and left turn signals.
Right and left side lights.
Rear fog lamp.
Reverse signal and stop signal.
Signal wire, 12 volts from battery.
12 volts from ignition.
Grounding contacts.

The standard connection plug is located under the trunk trim.

Connecting the towbar

Installing a towbar on a Nissan X-Trail with your own hands

To install a tow hitch yourself, you must first prepare the car. Place it in a comfortable position and completely unplug it. Next you need to follow these steps:

remove the bumper and amplifier with all fastenings;
install the towbar mounting plates;
install the remaining fasteners on the car, then secure them with bolts;
install the amplifier and bumper;
secure the special equipment beam with bolts;
install the removable ball and plug connector;
connect the wires to the car's electrical system;
connect the battery.

After this, check the operation of your car's signals. More detailed installation instructions can be found here.

Is it worth buying a used towbar/fastener?

There are a wide variety of used mounts on the market, which for some reason are no longer needed by the previous owner. The cost of used mounts can be several times lower than new devices. Does it make sense to take a closer look at the offers of used towbars? Despite its apparent simplicity, a towbar is a rather complex piece of equipment and its damage can cause a dangerous situation on the road. Internal cracks, metal fatigue of fasteners, damage to the connecting plate, all this can be a consequence of long-term use, impacts, or accidents. For safety reasons, it is best not to buy used fastening equipment. This is especially true for the new Nissan Xtreil T32 models.

Instructions for selecting and installing a towbar on a Nissan X Trail

Trunk capacity is one of the important criteria for choosing a “family” car, however, even in a spacious cargo compartment, transporting building materials or long boards will be problematic. To transport large cargo, special car trailers are used. To transport this element, the car must be equipped with a tow bar. This component makes it possible to transport other cars and cottages on wheels. Many motorists install this part on their Nissan X Trail T31 car themselves.

The tow bar for the Nissan X Trail T30 (car model produced before 2007) and for the Nissan X Trail T32 (produced since 2014) have a similar design. This is taken into account when choosing a traction coupling device for the T31 model (the car was produced from 2007 to 2014). In general, towbars are conventionally divided into three types:

The cheapest option for installation on a car. The part is installed rigidly on the vehicle, without the subsequent possibility of dismantling.

Removable

The best option for those who do not want to spoil the exterior of the car. A quick-release hook with a ball is installed when use is necessary, and the mount for the traction part of the hitch is retracted under the bottom of the car.

The trailer hitch is mounted on a special platform located at the bottom of the car body. Fasten the device with bolts. Dismantling the traction device will require a certain amount of time.

Ball marking

Trailer mounting balls are marked as follows:

A: This marking is used for flanged trailer hitches that are secured with two bolts.

B: Removable, semi-automatic towbars.

E: Removable trailer hitch, mounted on a nut.

F: Forged, removable tow bars, equipped with two mounting holes.

G: Removable with 4 holes.

S: Horizontal removable trailer hitch.

H: Welded traction couplings.

Tips for use

In order for the traction coupling device to serve for a long time, you need to follow some recommendations for its operation:

When the load is over 100 kg, you cannot move at a speed above 90 km/h.
When not using the towbar, it must be covered with a special cover. If the design of the device allows, then it is better to remove the coupling hook.
The traction coupling device is regularly wiped from dirt and moisture.

A towbar is a part necessary for transporting trailers and towing other vehicles. If you have certain skills and a set of tools, you can install the trailer hitch yourself.

How to reduce car fuel consumption

An article about true and false means of reducing fuel consumption. Pros and cons of different methods. At the end of the article there is a video about reducing fuel consumption.

Saving methods with elements of hoax
Ways to reduce fuel consumption that actually work
Video about reducing fuel consumption

Any car owner sooner or later comes to the conclusion that he should try to save on gasoline. There are enough ways to do this, but before you rush to friends or online resources for help, you should look at the car’s instructions. All the basic and, most importantly, information suitable for a specific car is contained there, from the optimal economical speed of movement to the criteria for choosing oil. And after that you can turn to other sources.

We will help you install a tow bar and other additional equipment on your car!

Use the services of our service center in Yekaterinburg to receive high-quality and certified installation services for towbars, trailer hitches, bollards, car alarms, anticorrosive application, sound insulation, thresholds, car audio and other car accessories.

Cost of basic work and services of the installation center and installation time:

Installation of a towbar on a domestic car with conventional electrics RUB 2,000. - 1,5 hour
Installation of a towbar on a foreign car with conventional electrics RUB 3,000. - 2 hours
Installation of a tow bar on a car with connection of a coordination unit RUB 4,500. - 2 hours
Connecting a set of conventional electrics (without installing a tow bar) 500 RUR. - 30 min
Connecting a coordination unit to a car (without installing a tow bar) RUB 1,500. - 1 hour
Service for checking and issuing a certificate for installing a towbar 1,500 rubles. - 1 hour
Install a hood deflector or a set of deflectors on the windows RUB 500. - 1 hour
Installation of front bumper protection, kengurin RUB 1,500. - 1 hour
Installation of a set of thresholds on a car RUB 1,500. - 2 hours
Installation of rear bumper protection RUB 1,500. - 1 hour
Installation of a gearbox blocker from RUB 3,000. - 2 hours
Installation of a steering shaft lock 500 RUR. - 20 minutes
Installation of an alarm system without auto start RUB 3,000. - 4 hours
Installation of a car alarm with auto start RUB 4,000. - 4 hours
Installation of car audio on a car from 1000 rubles. — from 1 hour
Installation of rear parking sensors 2500 rubles - 1.5 hours
Installation of a standard head unit RUB 1,500. - 1,5 hour
Installation of a rear view camera RUB 1,500. - 1,5 hour
Installing a roof rack RUB 500. — from 30 minutes to 1 hour
The cost of installing crankcase protection is 500 rubles. - 30 min
Individual » Copyright » protection against car theft from 15,000 rubles. - a day or more

Why should you contact us?

The installation center has all the necessary certificates and documents for the installation of trailer hitches and additional equipment, which will be provided to you upon completion of the work.
We service all warranty vehicles. There is no longer any point in overpaying big money to official dealers and being afraid of missing out on the warranty!
We provide warranty and post-warranty service for equipment installed in our service center.
The installation center specialists have many years of experience, more than 10 years in the installation of towbars, alarms, security systems and other additional equipment on cars.
All services for the installation of auto products are certified according to the DS AT system (certification system for road transport of the Ministry of Transport of the Russian Federation)
We have no delays. If you have signed up for a specific time for installation, that hour will be free and the technician will start working on your car.

Is it possible to install it yourself?

Installing a towbar on the Nissan X-Trail T31 is quite logical, since the format of the car is quite suitable for towing. This means that it is better to do this in the most comfortable way. A tow mount is not included, although plugs are included as standard. Installation and selection of the device depends entirely on the preferences of the car owner.

Many car owners install the Nissan X-Trail T31 tow bar themselves. But there is no one who would be delighted with their own actions. To install a simple towing hook, as is usual with the Japanese, you will have to disassemble almost half of the car. You will have to remove the headlights and tamper with the X-Trail wiring. The installation does not always go smoothly. If you value your time, it is better to contact a good car service center. We would like to remind you that for cars under warranty, any independent intervention in the design automatically means a complete loss of warranty.

Installation of some models requires cutting out the Nissan X-Trail bumper.

It is better to choose models in which you do not need to cut out the bumper. These are Spanish and German models. Good reviews from manufacturers Galia, Imiola, Aragon.

Equipment

The mounting kit should include the following items:

Installation instructions with mounting and wiring diagrams.
Wires.
7-pin socket, mounting plate.
Fasteners.
Protective cap.

How is installation done?

Preparation for installation includes the following procedures:

Removing and hanging the rear wheels.
Removing moldings and rear mudguard
Disconnecting the reversing lights and fog lights.
After this you can remove the rear bumper.
You need to remove the rubber bands holding the muffler and rear amplifier.
Remove the trunk floor, spare tire, trim.

It is better to carry out work in a warm garage. If the room is not heated or installation is carried out in cold weather, fasteners and plastic parts must be heated using a hairdryer. This is done because plastic becomes brittle in the cold and can crack.

Installation and Installation

Installing a towbar on a Nissan X-Trail begins with electrics.

To make it easier to navigate, the tow bar wires need to be laid parallel to the Nissan X-Trail fog light wires. This makes it easier to find the hole for the wires in the car body.
In accordance with the instructions for wiring and color designation, connect the wires, check their integrity and correct connection.
After connecting the wires, the device is installed and reassembled. The towbar mount is installed directly to the frame of the Nissan X-Trail in accordance with the instructions and design features of the system.
After reconnecting the headlights, it is very advisable to immediately check the functionality of the Nissan X-Trail electrics.

The installation is complete, you can begin assembly. The entire installation takes at least 5 hours if you have all the necessary tools and some experience in auto repair work. If you have no experience in repair work, it is better not to start experiments with the Nissan X-Trail, since this is not the easiest car to assemble. When working independently, it’s a good idea to have experienced comrades, preferably with an Isktrail or Qashqai car.

Towbar (tow hitch) Nissan X-Trail (T 32) 2WD, 4WD from 2014 onwards.

car model	Nissan
Ball type	C
Weight of transported trailer	1200 kg
Remove the bumper	Yes
Bumper cutting	No
(Stupino)
(Stupino)

Our advantages

10% discount when purchasing 2 or more sets of tools

We have a large selection of auto tools

Delivery throughout Nizhny Novgorod at a time convenient for you for only 200 rubles

50% discount on installation at our towbar installation service center

Unique offers for regular customers!

Best price from manufacturers

The trailer hitch uses a conditionally removable ball (on two bolts).

The trailer hitch is attached to the side members of the vehicle

When installing a trailer hitch on a vehicle

There is no need to drill holes in the car body; standard mounting points provided by the manufacturer are used

no need to cut bumper

the bumper needs to be removed

The delivery set includes: mounting and fasteners, cap. The fasteners are galvanized.

Delivery

Delivery of the tow bar in Nizhny Novgorod is carried out by our own courier service within 24 hours from the date of purchase. Delivery of the towbar in the Nizhny Novgorod region and other regions is carried out by courier service at established rates.

About the manufacturer

LLC "Trailer" is an enterprise engaged in the design and production of towbars (traction devices) since 1991.

Having extensive experience in the production of automobile accessories, the company "Trailer" LLC successfully meets two key indicators - high quality of products combined with an affordable price!

All products of the enterprise undergo mandatory certification and quality control. Production is certified in accordance with GOST ISO 9001-2011 (ISO 9001:2008).

A towbar is an indispensable practical accessory for any car. By purchasing a towbar (tow hitch) in our online store, you not only significantly increase the capabilities of your vehicle for transporting goods, but also reduce the likelihood of damage to the surface of the car and the geometry of the body in minor accidents.

Installing a tow bar

After selecting the appropriate towbar model, it must be installed on the vehicle. Motorists install the tow bar for the Nissan X Trail T31 themselves.

Before installing the towbar on the Nissan XTrail, the following preparatory measures are carried out:

The car is driven to a viewing hole, overpass, or the rear part is raised with a jack. Next, remove the rear wheels.
The side plastic moldings and mudguards are removed.
Disconnect the fog lights and tail lights.
Remove the rear bumper.
Remove the rubber bands securing the rear amplifier and muffler.
The trunk floor and trim are dismantled and the spare tire is removed.

After completing the preparatory work, you can directly begin installing the traction coupling device on the car.

Equipment

The standard equipment of the traction coupling device includes:

Installation instructions.
Installation wires.
Seven-pin socket.
Fastenings.
Protective cap.

Installation

After preparation, begin assembling the towbar structure:

A towbar is screwed in place of the bumper reinforcement. The bolts and nuts do not need to be over-tightened.
Trimming is required to route the towbar socket wires. It is done at the bottom of the bumper using a jigsaw.
Next, connect the towbar socket to the car's electrical wiring.
Tighten the fastenings and carefully check the operation of the trailer's electrical devices.
Install the muffler, rear bumper, moldings and trunk lining in the reverse order of removal.

Connecting the socket

When connecting, use the following pinout diagrams:

The connection is made according to the following scheme:

Left turn signal.
Anti-fog headlight.
Minus.
Right turn signal.
Right side light and license plate light.
Stop signal.
Left side light.

Also, when connecting, focus on the color of the wires:

Red – side lights.
Brown – left turn signal.
Orange – fog light
Yellow – stop light.
Green – reversing light.
Gray – right turn signal.
Black – mass.

“BOSAL” on T30

I installed a Bozal tow bar and bought it for RUB 7,200. came close, cut out the bumper gradually so as not to cut off excess, removed it in the following sequence: unscrewed 2 bolts under the rear, removed the lower apron and unscrewed 2 screws on each side under the wheel arches and then removed it. I connected the electrics to the wiring of the lights, the only thing was that I connected the dimensions and the license plate illumination to the socket itself, attaching a photo of the work.

Were there any problems with the installation? Is everything okay?

Everything was screwed in as it should, if I had installed it a second time I would have made two cutouts in the bumper just for each bracket. Try it on ten times - cut it once!

People who have experience in operating trailers on X, will the T31 variator not die from this?

depending on what you are going to carry. Up to 750kg is normal, you won’t even notice it.

will notice that I have a PVC boat on a trailer, so at speeds over 100 it feels like it’s sailing, nothing will happen to the variker if you don’t start with axle boxes

I apologize for bringing up the topic. In general, I’m going to install a towbar, they’re intimidating me with registering with the traffic police. Does anyone know if we need to register it on our car? I heard that if you have standard mounts, you don’t need them. What are the options, who came across them? T31, 12 g.

you will have to get a certificate from Rostekhnadzor

What kind of certificate? And where is this shaitan office?

Yes, this is a joke!)))))))))) and you’re not planning on installing a tow bar in the standard places? if you don’t weld it to the body, then you don’t need to register anything

It seems like if the towbar is original or another certified one, then no certificates are needed. but in general.. it’s easier to call the MREO and ask, business for a couple of minutes)

there is no legal concept of “native”, only certified, thus without “a piece of paper, you’re a turd”

In general, I installed it. They gave us a passport for the trailer, a certificate, and a certificate of completion of work. Everything is attached to the standard places, the bumper was trimmed a little (it seems neat, it doesn’t catch the eye) The office has permission to manufacture and install. The price is 7500 rubles and 3 hours of time. In short, the boat tractor is ready :))

Last edited by VIN54; 07/12/2017 at 17:18.

where are the pictures of the result? what kind of office? what does the certificate look like?

Why is this? This is the same spare part from the Nissan spare parts catalog, just like the trunk, for example. Mine came with the original towbar, so do I have to prove to someone that it’s factory? some kind of nonsense) although no questions arose during registration..

Towbar for Nissan X Trail - making a powerful tractor

Since the beginning of the automobile industry, almost all manufacturers have tried to make the vehicle as versatile as possible. Moreover, this concerned not only the vehicle’s performance, but also the amount of cargo transported. Many automakers have been thinking about how to increase trunk capacity and make this part of the car as capacious as possible. However, the best solution for increasing the amount of cargo transported was not huge luggage racks, but the creation of passenger trailers. Today, not a single car owner who often travels outside the city can do without them.