Replacing low beam lamps in Chevrolet Cruze headlights

Chevrolet Cruze lamps

The Chevrolet Cruze has a large set of lamps, which are assigned a variety of functions.
For example, low beam and high beam allow you to drive comfortably and safely in the dark. Lights located on the instrument panel are necessary to inform the driver about the condition of his vehicle. Dimensions, license plate lights, reverse lights, turn signals, and brake lights serve to inform other road users.

Headlights, interior lighting and dashboard lights make operating the Chevrolet Cruze more comfortable.

Is it possible to install LED lamps in a Chevrolet Cruze

It is possible to install LED lamps in a Chevrolet Cruze; you can even find many examples on the Internet, but the quality of the light will depend on the LED lamps installed. Cheap ones do not have a clear boundary and the beam of light is blurred, while more expensive lamps have a light boundary.

Photo of LED lamps installed in the low beam of Cruze

Similar articles:

Share “How to replace the low beam bulb on a Chevrolet Cruze”

Add a comment Cancel reply

You must be logged in to post a comment.

The text is mostly for yourself, so you don’t have to look for it anymore. But maybe it will be useful to someone!

Revision of the article dated January 16, 2015. Headlights of Chevrolet Cruze sedan from 2012 to 2015

2) 94535545 – headlight bulb H4

3) 13505773 – headlight bulb W5W

4) 13505769 – headlight lamp

5) 13500812 – turn signal lamp W5WLL

6) 13252455 – left wing turn signal, also number 95931770, assembled with a light bulb 13252455 – right wing turn signal, also number 95931771, assembled with a light bulb

7) 95169830 – left fog lamp 95169831 – right fog lamp

94536019 – fog lamp

Headlights Chevrolet Cruze sedan from 2009 to 2012

2) 94535545 – headlight bulb H4

3) 13505773 – headlight bulb W5W

4) 13505769 – headlight lamp

5) 13500812 – turn signal lamp W5WLL

6) 13252455 – left wing turn signal, also number 95931770, assembled with a light bulb 13252455 – right wing turn signal, also number 95931771, assembled with a light bulb

7) 95989994 – left fog lamp 95989995 – right fog lamp

94536019 – fog lamp

Tail lights Chevrolet Cruze sedan from 2009 to 2015

2) 95130772 – rear left internal lamp 95130773 – rear right internal lamp

3) 13505776 – rear light bulb 21W

4) 15829331 – rear light bulb WY21W

5) 13505776 – rear light bulb 21W

6) 13505776 – rear light bulb 21W

7) 95107229 – license plate light

Headlights Chevrolet Cruze hatchback from 2013 to 2016

2) 94535545 – headlight bulb H4

3) 13505773 – headlight bulb W5W

4) 13505769 – headlight lamp

5) 13500812 – turn signal lamp W5WLL

6) 13252455 – left wing turn signal, also number 95931770, assembled with a light bulb 13252455 – right wing turn signal, also number 95931771, assembled with a light bulb

7) 95169830 – left fog lamp 95169831 – right fog lamp

94536019 – fog lamp

Headlights Chevrolet Cruze hatchback 2011, 2012

2) 94535545 – headlight bulb H4

3) 13505773 – headlight bulb W5W

4) 13505769 – headlight lamp

5) 13500812 – turn signal lamp W5WLL

6) 13252455 – wing turn repeater, also 95931770 13252455 – wing turn repeater, also 95931771

7) 95169826 – left fog lamp 95169827 – right fog lamp

94536019 – fog lamp

Rear lights Chevrolet Cruze hatchback from 2011 to 2016

2) 13505768 – rear lamp

3) 13505769 – rear lamp

4) 95489717 – additional brake light

5) 95240544 – rear left fog lamp 95240543 – rear right fog lamp

6) 13505776 – rear fog lamp

7) 13502179 – license plate light

Headlights Chevrolet Cruze station wagon from 2012 to 2015

Which N4 lamps are better: types and manufacturers

On the Chevrolet Cruze, low and high beam are implemented by one two-filament halogen lamp with an H4 socket. Within the framework of general requirements for type and design, you can choose certain models of light bulbs from different manufacturers. There are many offers on the market with different parameters. The main selection criteria should be considered:

• brightness;
• shade of light;
• life time;
• price.

One of the most popular categories among consumers are lamps with a cool white tint, which are usually classified as devices with increased visual comfort. They provide a wider overview, better readability of details, and legibility of inscriptions, license plates or road signs. However, white light also has negative qualities - in bad weather it is reflected from snowflakes or raindrops, which significantly impairs visibility and distracts the driver’s attention.

Important! The power of H4 lamps is 55/60 W. Some drivers install rally models of 80-100 W, although using them in the city or on intercity routes is prohibited.

Increased brightness

The luminous flux density depends on two elements:

• lamp parameters;
• reflector design.

If there is insufficient light, you can try to change only the lamp model. There are devices with increased brightness, from 30 to 150% (and more). Manufacturers declare a high level of brightness, but in practice this is not always achieved. Most of the lamps are either outright fakes or designed for rally tracks.

Attention! Even original lamps with increased brightness do not provide a full increase in luminous flux by the declared amount. If there is an inscription “+120%” on the box, this only means that in laboratory conditions an increase in indicators was achieved at one of the many control points. Everything else is a marketing ploy.

Narva

Narva is a company from Germany that has its own glass production and is the owner of a lot of technological developments. The company's products are distinguished by a wide range and high quality of lamps. For installation in Chevrolet Cruze we recommend:

• Narva Range Power;
• Narva Xenon Look.

It is not recommended to use lamps from the Rally series as they are designed for sports cars.

Bosch

A powerful brand of global importance that does not need any special introduction. For use in Chevrolet Cruze head optics we can recommend:

• Bosch H4 LONGLIFE DAYTIME;
• Bosch Pure light.

The first option is lamps with an extended service life, the second is inexpensive and ordinary lamps in all respects, which can be installed in Chevrolet Cruze headlights without hesitation.

Clearlight

The Korean company Clearlight produces xenon, bi-xenon, halogen and LED lamps that can be installed in the low beam of a Chevrolet Cruze. The parameters of the devices are quite varied, the choice is wide. However, there are a large number of cheap fakes on the market, so you need to be careful and carefully check the labeling and country of origin. We can recommend the H4 models from the Longlife series, which have an extended service life.

Philips

Philips h4 lamps are installed by default in Chevrolet headlights. The standard solution, however, the Philips model range also has new products that allow for greater efficiency. These include:

• Phillips Crystal Vision;
• Philips X-tremeVision;

Vision 130 models have an extended service life; the narrow beam of light practically does not hit the oncoming lane and does not blind drivers. However, many users note poor visibility of roadside details and readability of road signs.

Osram

Inexpensive German lighting devices with a long service life and high-quality bright light. Popular models:

• Osram Original Line;
• Osram Ultra Life;
• Osram Blue Intense.

There are many models of Osram h4 halogen lamps that provide effective and comfortable high and low beam.

Attention! Some users claim that the quality of the company's lamps has recently dropped, but this does not affect the ratings or popularity.

LED lamps

The use of LED lamps for high or low beam is prohibited. The only exceptions may be LED lamps installed by the manufacturer in specially designed headlights. Chevrolet Cruze is equipped with halogen lamps by default. Some motorists try to bypass the rules by installing such lamps, which causes inconvenience for drivers of oncoming cars. In addition, weak heating of the LEDs causes condensation to settle and icing of the headlights.

Chevrolet Cruze low beam lamp: how much does it cost and how to change it

For burnt-out low beam lamps, you will be fined 500 rubles (Article 12.5 of the Code of Administrative Offenses of the Russian Federation).

If you are the owner of a Chevrolet Cruze and are faced with the fact that the high and low beams have stopped turning on completely or only one of the headlights is not on, then you have come to the right place.

In this article we will tell you how to replace low beam lamps on a Chevrolet Cruze and eliminate other headlight faults without trips to a service station and stripping.

Which lamp is worth

The Chevrolet Cruze has been produced since 2008, initially introduced as the Daewoo Lacetti Premiere, and in Australia under the name Holden Cruze since 2009.

The car is built on the same platform (Delta II) as the Opel Astra. Chevrolet Cruze Hatchback is a fairly popular option among young people; it has been produced since 2011.

Until today, Cruz has undergone several restylings and was produced in two generations:

• J300 (from 2008 to now);
• J400 (since 2015).

The main differences were the different sets of available engines and a more aggressive and modern exterior (for the J400). The photographs show the appearance of this model from different years of production.

Exterior of Chevrolet Cruze

But let's figure out which lamps are on the low beam and high beam. The Chevrolet Cruze is equipped with block headlights in which the same lamp is responsible for the low and high beam. This is a H4 type double filament halogen lamp. It is installed on most cars with this headlight design.

H4 lamp

It will be useful for you to keep a table with a list of all the lamps that are used in the Chevrolet Cruze.

List of lamps used in the Chevrolet Cruze

The best manufacturers

So, we found out that Chevrolet Cruze lamps are quite widespread. To better guide you, we have made a selection of popular models based on reviews from car enthusiasts.

Philips H4 with increased brightness

So, standard or long life H4 lamps for Chevrolet Cruze:

Lamps with increased brightness:

Cold glow lamps (xenon effect):

Do not install any lamps other than halogen ones in standard headlights. The point is that problems will probably arise at the nearest traffic police post. Remember once and for all: you cannot install light sources in optics for which it is not designed, and then you won’t have to justify yourself: “These are LEDs, this is not xenon. H4 marking means it’s possible!”

Which H4 lamps are better: prices, articles, manufacturers

• The standard lamps that are installed in Cruise headlights are usually produced by Philips.
• Most often this is a Philips “Vision” with catalog number 12342PRB1 .
• The average price of such a lamp is from 180 rubles per piece .

It is positioned as standard, but the company is already releasing a modification made from special quartz glass, made using Philips Quartz Glass . The manufacturer says that with the same power, the lamp emits 30% more luminous flux compared to analogues.

Increased brightness

Of course, this is not the only suitable Philips lamp with an H4 base; there are at least three dozen of them.

• Among them, the Philips “Rally” with increased power 100/90 W ; it is somewhat more expensive, starting from 250 rubles apiece. Due to its high power, its use on public roads is not recommended.
• The brightest H4 lamps from the company’s line are Philips X-tremeVision (820 rubles per pair) . With a standard power of 60/55 W, the lamp can produce 130% more luminous flux, and the beam range reaches 130 m. The lamp has received certification for use on public roads.

Narva

Narva RP50 Range Power 50+.

• The Narva RP50 Range Power 50+ halogen lamp with catalog number 48861 also has a standard power, but judging by reviews, it illuminates the road better than standard lamps, and is superior to more expensive analogues in low beam.
• The price of this halogen lamp is from 240 rubles per piece.

Bosch

A good intense white light is provided by the Bosch Day Time Plus 10 H4 lamp with article number 1987301054 . In terms of color characteristics, the luminous flux is closest to sunlight, so the driver’s eyes do not get so tired even on a long journey.

Clearlight

Among the inexpensive but durable lamps, Clearlight “LongLife” is distinguished with standard power characteristics and a price of 140 rubles apiece.

The manufacturer guarantees 1000 hours of operation. Only the country of origin, China, can confuse.

Osram

They say Osram is no longer a cake. But it is still the choice of many.

LED lamps

They cost about 2000 rubles per set, and they light up too!

Let's stop briefly. They cost significantly more, but according to reviews they don’t shine much and are better.

Chevrolet Cruze Hatchback Black Lightning › Logbook › All types of lamps that are in the Cruze

I'll be brief... I'll just throw out a photo with all the types of light bulbs that we have in the car, at least 1 person will already need it)))

Good luck to everyone and lots of light!)))

Chevrolet Cruze Hatchback 2011, petrol engine 1.8 l., 141 l. p., front drive, automatic transmission — consumables

Cars for sale

Chevrolet Cruze, 2013

Chevrolet Cruze, 2012

Chevrolet Cruze, 2013

Chevrolet Cruze, 2013

Comments 29

Lamps in the sun visors T6 base Rear turn signal lights (Wagon) PY21W base…

this table is only suitable for sedans

Honestly, I don’t know, I’ve been riding on the deep for three years.

excellent) only in PTF H8. Tested by personal experience. H11 fits there, but only if the antennae are trimmed a little. But on H8 the power is 35 W, and on H11 it is 55 W. Take care of the wiring!)

I don’t know anything, I put H11 there as my relatives become and shine normally!

Z.Y. Subscribed! Good luck on the road!

Yes, a useful page) I don’t argue, where can I find one like this for a new car now?)))

Useful sign!) Be sure to save))))

Saved it to bookmarks because... I have the same book, but it’s always in the car))) I recently wanted to make 50W in reverse... in the end I did it like this www.drive2.ru/cars/chevro...sw/bau611/journal/288226/ I went to install it on you W16W sTsuko)))

))) sometimes in reverse I would stick the xenon on myself... that’s the topic

I have already considered this option, but it is expensive and not available everywhere avtogsm.ru/mtf-slim-line-w-21w-p4933.html

and on ebay? did not watch?

I have already considered this option, but it is expensive and not available everywhere avtogsm.ru/mtf-slim-line-w-21w-p4933.html

you can look, maybe there is another one that will fit, or there are enough craftsmen in the service there, I would install it for myself on the very first day, but so as not to void the warranty, I don’t install it

In terms of rank, I really need such a table of light bulbs, I want to switch to LED ones, so that I can take each one to the store :)

Look at the LEDs, they are bright but there is not much light from them. I wanted to put hard diodes in the PTF, the seller told me, showed me, explained... and I changed my mind, they are like running lights, beautiful and bright... or put Philips diodes in stacks so that everyone will go blind when you start to press the brakes))) and I’ll google maybe I’ll find something if what will I post?

Replacing the lamp

Which one to choose

Replacing a lamp is most often preceded by its selection. For Chevrolet Cruze, you should purchase H4 standard lamps. This is a two-filament light bulb that combines low and high beam.

When choosing a lamp, you should pay attention to such characteristics as:

• Luminous flux power - measured in Lumens (abbreviated Lm);
• Durability – measured in number of hours;
• Color temperature, i.e. color of the luminous flux.

In addition, an important indicator is the penetrating ability of the light flux.

In many ways, the characteristics of light bulbs depend on the principle of their operation. There are currently three types of lamps on the market:

However, despite all the positive aspects mentioned, xenon bulbs cannot be called ideal, as they have a number of disadvantages:

Other advantages of these lamps include:

• Durability, which is higher even than that of xenon;
• Low power consumption.

Before purchasing, you should compare all the pros and cons of light bulbs in order to choose the best option in your case. In particular, it is necessary to take into account the weather conditions under which trips will most often be made, as well as other nuances.

Note! It is advisable to change the lighting elements in the headlights in pairs so that they give the same glow. In addition, if you do not replace the second light bulb, then you risk noticing that it does not light up at the most inopportune moment, because they have the same service life.

Replacement procedure

Replacing a low beam lamp on a Chevrolet Cruze does not involve any difficulties, and is performed in the following order:

• If replacing the low beam bulb on a Chevrolet Cruze is carried out on the left side (in the direction of travel), then you must first remove the neck of the windshield washer reservoir. You just need to take it out, since it is not screwed on.

• Next you need to disconnect the block from the headlight, to do this you need to pull it by the housing. Since it usually fits quite tightly, you should pull with force. In this case, you should not hold on to the wires of the machine, as they can be torn out of the connector.
• After dismantling the pad, you need to pull the tongue of the rubber plug. When one side of the plug comes out, you can pry it off with your finger. The neck of the plug tightly fits the cartridge, so it should also be tightened with a certain amount of force.
• Then you need to bring the ends of the spring clamp together so that they come out of the grooves.

• Next, you should remove the old lamp from the headlight and install a new one in its place. It must be said that thanks to the grooves, the new low beam bulb on the Chevrolet Cruze cannot be installed incorrectly.

That's all the instructions for replacing a burnt out light bulb. Now you just need to assemble the headlight in the reverse order.

Note! It is advisable to carry out the work with gloves so as not to touch the glass bulb of the lighting element. Otherwise, greasy stains will remain on the glass, which can cause the light bulb to quickly burn out.

Using the same scheme, the low beam lamp on the Chevrolet Cruze on the right side is changed. Moreover, nothing interferes with access to it, so doing the job is even easier. (See also the article Installing fog lights on a Chevrolet Lacetti: features.)

Light bulbs on a Chevrolet Cruze: replacing high, low and side lights

Chevrolet Cruze optics is dedicated to: The optics in the car must always be in good working order, because the life and safe driving of not only the driver and passengers, but also pedestrians and other vehicles on the road depend on it. We will learn below how to maintain it in good condition.

What should you know about car optics? Every car enthusiast should know about choosing headlights for a Chevrolet Cruze, the occurrence of unforeseen problems, their elimination and dismantling of optics.

Features of choice As mentioned above, it is designated H4 and has a certain power. For a good imitation of light, you can use it in the base. The fog lamp has the name H8 and a power of 35 W.

For convenient movement, so that the fire is bright, xenon is installed in the lamps. From xenon, the light, be it headlights, will become softer and richer. The xenon lights in the taillights light up very quickly, which is why it is convenient. It is sold complete with installation instructions.

The selection of optics for a Chevrolet should be made according to the indicators described above. Common problems with optics and how to fix them In fact, there are not as many problems with optics as it might seem at first.

To a large extent, if there is a problem with a lamp or light bulb, the reason lies in a blown fuse. Replacement of the fuse is mandatory. The same is true if the light bulbs fail.

After replacement, you can also install xenon to better simulate daylight.

It is necessary to diagnose the operation of the headlights, and more specifically the electric corrector, with the light optics turned on. If such a need arises, you can adjust the direction of light emissions from the headlight unit and PTF. You can find out how to replace the headlight below by the author of the video - Petr P.

Do-it-yourself dismantling and replacement of low beam lamps It is better to install daytime running lights in a convenient position, for example, on a lift or in a wide inspection hole, which will provide good visibility. Parts for installation and replacement must be prepared in advance.

It is best to purchase optics in a specialized store. To install the headlights, you can get by by removing the lower protective plate on the bumper. And to ensure better visibility, you can remove the fender liner fasteners and move it a little to the side.

This is not necessary, but you can take note for convenient replacement. Next, foglights and bumper covers are installed.

The wires must be tightened into a corrugation and secured with plastic clamps, and then brought out to the battery.

After that, you can proceed. To do this, you need to disconnect the battery, remove the glove compartment and fuse box. Remove the rear cover on the DRL fuse box.

Then, among the wires, find the purple wire coming from pin 24. Here you need to connect an additional wire and then install the fuse box back.

After this, you need to remove the plastic trim on the threshold, on the driver's side, and run the wire from the seat belt buckle under the dashboard niche. Then connect the relay and secure the excess wire with electrical tape. After this, return the threshold and glove compartment to their place. Now you can move the expansion flank to the side and find a seal underneath it, with which you need to remove the relay wire from the passenger compartment.

Connect the fuse and the positive wire from the PTF to it. Then we connect the negative wire from the fog lights to the battery and connect it to the standard system of the car. When completing work with the DRLs, it is necessary to return all the removed elements to their place in the reverse order and check the functionality of the car’s headlights.

This photo report shows in detail how to replace low beam lamps on a Chevrolet Cruze with your own hands. It is worth noting that this photo report is suitable for sedan and hatchback bodies. The replacement procedure is very simple.

We don't need tools, everything is done by hand on the left and right sides, with only one exception. On the left side for free access, the neck of the washer barrel will interfere. It can be removed by hand by simply pulling the neck up.

Koito VWhite H4 bulbs were used for replacement.

Hold the new light bulb only by the base, without touching the glass with your fingers. This will allow the new bulbs to last longer. You can also read our blog about adjusting headlights.

First of all, disconnect the connector. Just pull it out and that's it. It can sit very tightly, pull harder, but not by the wires. The neck of the rubber plug fits tightly around the base.

We pull it together, we are not afraid.

Under the plug we see the base, it is pressed with brackets. We squeeze them with our fingers until they come out of the grooves. The direction of compression is shown in the figure with red arrows. The staples can be released one at a time. After the brackets are removed, take out the old light bulb and install a new one.

Types of headlights

Initially, all cars were equipped with headlights with conventional incandescent lamps. They gave a weak light and burned out quickly. Therefore, manufacturers improved the design by adding halogen vapors to the bulb with the filament. This increased the service life by 4 times and the brightness by 2 times.

Today there are several types of optics that can be installed in a Chevrolet Cruze:

1. Halogen lamp. The traditional look that is usually installed from the factory. Gives yellow or white light. The luminous flux power is usually limited to 1550 lm. This is the cheapest type. The service life varies from manufacturer to manufacturer; 1000 hours is considered a good indicator. Halogen lights work well in rain, snow, and mud.
2. Xenon lamp. Such optics are characterized by high luminous flux power - up to 3300 lm. Produces white light that is very close to daylight. Depending on the model, the service life can be up to 3000 hours. The disadvantage of such headlights is the bright beam of light, which can blind an oncoming driver on a dark road. At the same time, the light has poor permeability and is not suitable for driving in fog and rain. A significant disadvantage is the high cost. Installation of xenon should only be carried out by specialists, since it involves the installation of ignition units with high voltage voltage.
3. Bi-xenon headlights are xenon optics that contain an element to control the strength of the light beam. Their disadvantage is the delay in switching from low beam to high beam. It occurs due to the fact that inert gases require time to warm up.
4. LED lamp. This is a relatively new type of optics that is not yet widely used. The advantages of LED lamps are the same as those of xenon - daylight and luminous flux power of 2000 lm. Another advantage is low energy consumption. These headlights have a longer service life than xenon ones. The disadvantage is the high cost.

The choice depends only on the budget and desires of the owner of the Chevrolet Cruze. But you need to take into account that on a car with standard halogen optics, modifications need to be made to install xenon or LED lamps. It is better to do this in a service center, since the work is complex.

Therefore, it is better not to do the installation of equipment yourself, but to entrust the work to specialists. They have almost the same color temperature as xenon and a luminous flux power of up to lm.

In particular, it is necessary to take into account the weather conditions under which trips will most often be made, as well as other nuances. You just need to take it out, since it is not screwed on.

Since it usually fits quite tightly, you should pull with force. In this case, you should not hold on to the wires of the machine, as they can be torn out of the connector.

When one side of the plug comes out, you can pry it off with your finger. Open the hood.

Low beam on a Chevrolet Cruze - features of lamp selection and replacement

Remove the negative terminal from the battery. Take the lamp by the socket body and turn it counterclockwise.

To dismantle, pull the housing in the direction opposite to the headlight. Press the glass flask all the way. Turn the lamp counterclockwise.

Pull the light bulb out of the housing. Install the new product in the reverse order of dismantling. Check functionality.

Tired of paying fines? There is an exit! Forget about fines from cameras! More details at the link.

To avoid frequent lamp burnouts, you should not start the engine with the headlights on low beam, install only high-quality lamps, and do not touch the lamp bulb during installation. Instructions for replacing lamps yourself The Chevrolet Cruze does not use plastic covers, but rather a rubber boot is installed that covers the headlight.

Lamps recommended by the manufacturer for use in the Chevrolet Cruze

First, we disconnect the block from the lamp without removing the bulbs on the Chevrolet Cruze. Next, carefully evenly remove the boot from the headlight housing. Now unfasten the lamp latch as shown in the photo, lift it up and pull out the lamp. We replace the lamp and what kind of light bulbs on a Chevrolet Cruze are all in the reverse order. If after installing a new lamp, headlight, or headlight still does not light, you should check the low beam fuse, which is located in the mounting block of the engine compartment.

Is it possible to install LED LED lamps in a Chevrolet Cruze? It is possible to install LED LED lamps in a Chevrolet Cruze; you can even find many examples on the Internet, but the quality of the light will depend on the LED lamps installed.

Replacing the light bulbs installed in the fog light

In order to change the fog light bulb, you must use the instructions below.

• Remove the aerodynamic shield.

• Unscrew the mud protection of the front bumper.

• Make room for access to the fog lamp.

• Disconnect the terminal block from the lamp.

• Turn the lamp counterclockwise to remove it.

• Remove the bulb from the headlight. It should be taken into account that the base of the lamps is often hot.

• Install a new light bulb. Check how the fog light works. This completes the replacement.

Replacing lamps in the rear light of a Cruze hatchback

So, for replacement we need a double-sided screwdriver and P21/5w and PY21W lamps.

What lamps can be installed in the brake light/dimensions

• OSRAM P21/5W O-7528 price about 30 rubles
• PHILIPS P21/5W P-12499 price about 25-30 rubles
• BOSCH P21/5W Pure Light 1987302202 price 30-40 rub.
• KOITO P21/5W 4524 price about 40-50 rub.

If your regular lamps often burn out, you can install lamps with an extended service life

PHILIPS P21/5W LONGLIFE ECO VISION P-12499LLECOCP price about 40-50 rub.

Turn signal lamps

• PHILIPS PY21W 12496NACP amber price about 50-60 rub.
• BOSCH PY21W amber Pure Light 1987302213 price about 60 rub.
• OSRAM PY21W amber O-7507 price about 50-60 rub.

Instead of conventional lamps, you can also install LED ones. But you need to buy powerful, bright lamps so that they can replace the standard 21-watt incandescent lamp.

We lift the trunk lid and carefully pry it off with a screwdriver and remove 3 plugs under which the screws for fastening the lamp are hidden.

Using a Phillips screwdriver, unscrew all three screws and carefully move the headlight towards you, removing it from the plastic bushings on the body. The lantern is in our hands.

Next, turn the brake light/side marker lamp socket counterclockwise and remove it from the lamp.

By pressing the lamp, turn it counterclockwise and remove the lamp from the socket. We take a new P21/5w lamp, install it and insert the socket by turning it clockwise.

In the same way, turning counterclockwise, we pull out the turn signal lamp socket and change it.

Interesting articles on the topic

How to replace lamps in an additional brake light on a Chevrolet Lacetti

We replace the trunk light bulb on a Renault Duster

How to replace license plate lamps for Renault Sandero and Sandero Stepway

Leave a comment

You must be logged in to post a comment.

When replacement is necessary

As mentioned above, the Chevrolet headlight is quite reliable; the bulbs usually fail, but in practice, sometimes it may be necessary to replace the entire unit. This is usually necessary in the following situations:

• Recovery after an accident. Lighting devices are damaged in accidents quite often, this is a common reason for replacement;
• Damage to glass. There are cases when glass is broken by a stone flying from under the wheels of passing vehicles. The glass cannot be replaced separately;
• Another option is found on used cars, this is clouding of the reflector, in which case a complete replacement of the part is also required.

In all these cases, it makes no sense to try to restore the headlight's functionality. Remember that the normal operation of lighting devices is the key to traffic safety.

When you need to replace the dimensions of a Chevrolet Cruze hatchback: causes and signs of failure

The Chevrolet Cruze side lights are part of a single unit along with the headlights and direction indicators. Driving in the presence of such a malfunction in the dark is prohibited. Timely contacting our specialized car service will help you avoid serious malfunctions that are possible when such problems occur.

Our auto repair shop specialists are well versed in the electrical components of Chevrolet vehicles. Incorrect vehicle voltage is dangerous not only for light bulbs, but also for numerous sensors, devices, and the battery. There are several main causes of failure when installing a new marker light bulb may be required.

Reasons for failure:

• low quality of installed lamps;
• unreliability of contact connectors;
• poor fixation of the lamp;
• incorrect voltage of the on-board network;

Each of the listed causes of failure may cause an immediate need to replace the side light bulbs. A full troubleshooting takes some time, so the driver cannot cope without the help of an auto electrician. If you independently figure out why the light bulbs burn out, it is quite difficult, then the driver can easily notice the breakdown himself.

Often, replacing a light bulb is required unexpectedly. In addition, there are certain signs of breakdown that you need to pay special attention to. So, for example, when one of the lamps fails, there is a high probability that others will refuse to work after it. This happens because the same type of lighting parts are installed in the car, having approximately the same service life.

The process of replacing a burnt-out low and high beam lamp

If the road lighting with low or high beams does not work normally, then the risk of getting into an emergency situation increases significantly. This is due to the fact that the driver notices the obstacle much later and has less time to carry out the maneuver. Therefore, when lamps fail, it is recommended to replace them as soon as possible. You can do this using the instructions below.

• Disconnect the terminal block.

• Remove the protective rubber cover. This may require quite a bit of force. The material from which the protection is made is quite strong, so the car owner should not be afraid of damage during the dismantling process.

• Compress the ends of the spring clip.

• Lift the lock up.

• Install the new lamp without touching the glass with your fingers.
• Install the protective casing following the marks.

Instructions for replacing lamps yourself

To replace low/high beam bulbs on a Chevrolet Cruze, no tools are needed. On the left side there is a washer reservoir in the way, which must be removed by pulling the neck upward. Procedure:

• disconnect the plastic block. Do not grab the wires, only the body;
• remove the rubber plug by pulling the tab and pull the plug off the base;
• squeeze the brackets pressing the base until they come out of the grooves;
• remove the lamp and install a new one;
• assemble all the elements in reverse order.

If you don’t have experience, you need to act carefully and slowly. Experienced people spend literally a few minutes replacing the low beam.

How to replace a turn signal

The turn signal on a Chevrolet Cruze is even easier to replace than the low and high beams. To do this you will need a thin screwdriver. It is best to change lamps while wearing gloves to avoid leaving marks. Before work, you need to disconnect the battery terminals.

Stages of work to replace the turn signal for a Chevrolet Cruze:

1. Use a screwdriver to pry the turn signal and pull it out.
2. Turn the cartridge counterclockwise and pull it out of the housing.
3. Remove the flask from the cartridge and install a new one.
4. Reassemble everything in reverse order.

To add personality to your car, you can install LED lamps on the turn signal for Chevrolet Cruze. How to do it:

1. Buy ready-made repeaters in Chinese auto parts stores.
2. Pull out the standard turn signals and remove the bulbs from them.
3. Observing polarity, connect new repeaters directly into the socket.
4. Attach the turn signal to the body with double-sided tape.

The optics for the turn signal are marked WY5W.